All Products
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks.
EZ-600-716M-X
EZ-600-716M-X is a 7/16 DIN male (plug), straight EZ connector for LMR®-600, T-RAD®-600, and TCOM®-600 cables. It features crimp-style outer contacts, spring finger inner contacts, and a no-braid trim to eliminate FOD. BeCu pins ensure strong contact in cold, high-vibration settings. The threaded 7/16 DIN design is ideal for high-power, weather-resistant RF systems.
EZ-600-NF-X
EZ-600-NF-X is a Type N female (jack), straight EZ connector for LMR®-600, T-RAD®-600, and TCOM®-600 cables. It features crimp-style outer contacts, spring finger inner contacts, and a no-braid trim to eliminate FOD. BeCu pins ensure strong contact in cold, high-vibration conditions. Weatherproof and MIL-C-39012 compatible, it ensures reliable RF performance in harsh environments.
EZ-600-NMC-2-D
EZ-600-NMC-2-D is a Type N male (plug), straight EZ connector for LMR®-600, TCOM®-600, and T-RAD®-600 cables. It features crimp-style outer contacts, spring finger inner contacts, and a no-braid trim to eliminate FOD. BeCu pins ensure reliable contact in cold, high-vibration conditions. Weatherproof and MIL-C-39012 compatible, it’s ideal for high-performance RF systems.
EZ-600-NMH-PL-X
EZ-600-NMH-PL-X is a Type N male (plug), straight EZ connector for FBT-600 and LMR®-600-LLPX® cables. It features crimp-style outer contacts, spring finger inner contacts, and a no-braid trim to eliminate FOD. BeCu pins ensure strong contact in cold, high-vibration environments. Weatherproof and MIL-C-39012 compatible, it’s ideal for high-performance, low-smoke RF systems.
EZ-600-NMH-RA-X
Type N, male (plug), right angle, EZ style connector for LMR®-600 type cables.
EZ-600-NMH-X
N male (plug) straight EZ connector for LMR®-600, TCOM®-600, and T-RAD®-600 cables. The EZ-600-NMH-X eliminates soldering and assembly errors with crimp-style outer contacts and spring finger inner contacts. A no-braid trim design prevents FOD, while BeCu pins ensure strong contact—ideal for cold and high-vibration environments. MIL-C-39012 compatible.
EZ-600-TM-X
EZ-600-TM-X is a TNC male (plug), straight EZ connector for LMR®-600, T-RAD®-600, and TCOM®-600 cables. It features crimp-style outer contacts, spring finger inner contacts, and a no-braid trim to eliminate FOD. BeCu pins ensure strong contact in cold, high-vibration environments. The threaded TNC design offers compact, weatherproof, and high-frequency RF performance.
EZ-900-NMC-2-SP
Type N, male (plug), straight, EZ style connector for HP-900, LMR-900, SFT-900, and T-RAD-900 type cables.
F-143 Connector
Building on the legacy of MIL-PRF-28876, the F-143 incorporates the latest technologies in fiber optic interconnect design. The backshells feature the Quickloc™ captivation system, developed by AFSI, that is easy to install, easy to remove the captivated aramid yarn of the cable, and recapture without cutting back the cable.
F2X Fiber Optic Building Entry Point
The building entry point (BEP) enables easy connection of buildings to your fiber optic network. The BEP can accommodate different numbers of fibers according to your needs. With the patented F2X® solution you are able to connect and measure FTTX installations faster.