All Products

Amphenol's double-sided lapping process provides the best solution for mobile device metal decorative logos. We can control part flatness tolerance within +/- 0.03mm and maintain a 1000N+ Laser weld bond between metal components. Our high-quality logos reflect a high brand value to customer end products.

Custom-engineered Ultrasonic Downhole Transducers are designed for extremely harsh environments that are highly corrosive, abrasive, hot (up to 392°F / 200°C), and pressurized (35,000+ psi). Applications include borehole images and diameter measurements, cement bond evaluations, casing inspections, fluid properties evaluations, flow measurements, and perforation inspections.

The DPBP 70/3333-TETRA-N is a Duplex Bandpass Filter for the European Public Safety/mission-critical network called Tetra, but it can also highly be used for the P25 networks or LMR/PMR UHF450 (380-470 MHz) radio networks. It is specked to 200 W CW and benefits among others for having a very high TX/RX Isolation and a very low Insertion Loss due to a unique silver plating in the filter house.

Dragonfly connectors are designed with a versatile combination of power and signal solutions in a compact design. Dragonfly series also offers PCB mount, panel mount and cable connections in a small form factor design utilizing high-reliability, high-retention and high cycle life precision machined contacts.

RFS Technologies' DragonSkin™ cable is a groundbreaking solution for public safety and mission-critical communications. It meets UL 2196 two-hour fire-resistance standards without conduit, ensuring signal integrity in extreme heat. Flexible, low-smoke, and halogen-free, DragonSkin™ is ideal for harsh environments and code-compliant installations.

RF Connectors for transmitting LVDS and Multi-Gig-Ethernet. We offer cable assembly solutions needed to transfer data within a vehicle. These are used to connect cameras, antennas as well as Radar/Lidar systems and enable scanning of the area for semi-autonomous and autonomous driving.

Driver dashboards with cluster displays or touchscreens. Manufactured according to customer specifications and design.

Drop-in-Duct is ideal where added protection or future fiber upgrades are needed. Available in Series 6, 7, and 11 from ½" to 2", its flexible HDPE allows easy bends without special tools. It provides a permanent pathway, protects against ground shifts and roots, performs in cold climates, and simplifies future cable repairs or replacement.

DSFP SMT Connectors offer dual high-speed lanes operating at 28Gb/s NRZ and 56Gb/s PAM-4 for a 50G & 100G aggregated bandwidth solution. It has additional 2 pins compared to the SFP/SFP+ family, which enables it to have a second high-speed channel with an identical connector form factor. The DSFP shares the same unique mating interface and EMI cage dimensions as the whole range of SFP/SFP+ cages.

FCI Basics D-Sub Accessories complement FCI Basics D-sub offering by accounting for the moderate to severe mechanical stresses encountered, and preventing risks like pulling up and accidental mismating. The range of derived accessories includes plastic or metalized plastic hoods, EMI/RFI shielded two-part metal hoods, various cable clamps, locking devices, dust caps, and brackets.