Search Results for seal n

Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-38999 Series II connectors. MS3180 & MS3181 . Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-26482 connectors. Protect unmated connectors by keeping dust and other impurities out of the termination ...

Shrink to seal.In this application, Cold Shrink will provide a weatherproof seal for Type N or 7-16 DIN connections that are made within a flange of ØA and B dimensions as specified in the Table on page 2. This illustration demonstrates an antenna/cable interface with a panel mount connector that provides a good seal-

Y Hermetic with interfacial seal Shell Size & Insert Arrangement are on pages 5-6. First number represents Shell Size, second number is the Insert Arrangement. Place Shell Size in box 3 and Insert ... The “N” designation is not referenced in part number, it is omitted. AB ANGLE OF ROTATION (Degrees)

In-house Glass Seal Capability. PCB connectors with glass material as the dielectric are popular in board solutions because of their ability to survive reflow and withstand temperatures up to 500°C. Traditional PCB connectors that use PTFE as the dielectric material often do not survive the high temperatures found in reflow and, as a result ...

Type II Seal: Slide Piggyback grommet down cable until it butts firmly on contact. L-1253-K April 2014 FSCM 77820 AMPHENOL CORPORATION Amphenol Aerospace 40-60 Delaware Avenue Sidney, New York 13838-1395 www.amphenol-aerospace.com Amphenol SPACER BACK INSULATOR BLUE CONDUCTOR WHITE WIRE OR OF BLUE WIRE.300.165 WHITE CONDUCTOR

3. Install frame, seal s, and cables as per the included instructions. 008 00 Seals for large entry points Seals for small entry points *Ingress protection and strain relief ratings apply to properly installed complete system, including Cablefix® One frame and all matching seals. Pat o. Descripton Clamping ange Ø mm Ingre

ZÕƒƒ04¾qÒŸ %óxð…R¬ íEà$'Ü S ˜Ð2ð ÒÊ ,0ZiŽÌu5®ƒ@`(ˆ–ƒ £¥ ƒlðùe u[J?× U^× ‰5C²e莼†Cû LH¯îiJ Q 4iN§6çftPGöƒÌ{I²¶¼>°¤ð© €àึ4¬¦gä¾ ¬«ˆXs¾›— ¦îÒšØÛ˾љ2‚Ipl { Ø ópÃõ ÓöÆ ; xî³UÙ)dí»B’ ȵ .K„’ô! Ó åó6œ VC Bh mí "Ø°’Ø'h„ ó}lPU ...

The Cryo-Seal Hermetic ensures your sealing and connectivity remain operational. 48-hour exposure testing conducted on our Cryo-Seal Hermetic series showed no fractures or cracks in the glass seal. Maintaining a true hermetic seal, limiting helium air leak to 1X10^(-7) cubic centimeters per second.

17025, with full traceability to SI through N.I.S.T. In addition to our standard calibration services, we also offer specialized tests, including: sensitivity at elevated or cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others.

SV's SMP Male PCB Surface Mount Connector, 2 Port, SB 9311-20013 features a glass seal with a low CTE to survive solder reflow. Access the design resources now!

AT06-6S-SR02GRY 6-Way Plug Female Connector with Reduced Diameter Seal, Strain Relief Endcap, Grey. Comparable to PNs# DT06-6S-CE13, 934454502

Glass Seal : Number of Ports Single : Electrical Frequency 40 GHz : Impedance 50 ohms : Shielding Effectiveness ≥ -80 dB DC - 3 GHz, ≥ -65 dB 3 - 26.5 GHz : Dielectric withstanding Voltage ...

703110001 | Amphenol Global Search | Amphenol seal n | Amphenol Global Search | Amphenol The AT Series™ connectors contain superior environmental seals, seal retention capabilities and feature our RockSolid™ Contact technology. Current Capacity No. 16, 13A Wire Range No. 16,14 - 20AWG Operating Temp. -55°C to +125°C Dielectric Value Meets

24 Position, Plug, Socket, Size 16, 13A, 250V, ARC Series™, Jackscrew, Bonded Front Seal, Keyed B, Reduced Diameter Rear Seal (Green), Black Body 16 13A ARC16-24SCR-P013 24 Position, Plug, Socket, Size 16, 13A, 250V, ARC Series™, Jackscrew, Bonded Front Seal, Keyed C, Reduced Diameter Rear Seal (Green), Black Body 16 13A ARC16-24SDR-P013

F1.Slide rear insulator on Expander Tool Amphenol P/N 11-10136, or locally fabri-cated equivalent. 2.Slide tool over inner pin contact. Push rear insulator with push rod Amphenol P/ N 11-10135, or locally fabricated equivalent, until it seats between retainer end and inner pin contact shoulder. 3.Remove push rod expander and proceed to step H.

Glass Seal : Number of Ports Single : Electrical Frequency 26.5 GHz : Impedance 50 ohms : Shielding Effectiveness ≥ -80 dB DC - 3 GHz, ≥ -65 dB 3 - 26.5 GHz : Dielectric withstanding Voltage ...

Search Results for at04-08pa-pm05 AT04-08PA-KIT01 8-Way Pin Receptacle, Wedge and Contacts Kit AT04-08PA-SRGRY 8-Way Receptacle Male Connector with Strain Relief Endcap, Standard Seal, Position A. Comparable to PNs# DT04-08PA-E008, 934445612 REQUEST A QUOTE AT06-08SA, 8-Way Plug, Female, A Position Key.

Regular With/without color ring 40 N 42 N Plating to withstand more than 100 installations on all versions Retainer 50 N 70 N -3 dB performance @ 2 Ghz Seal + Retainer 52 N 75 N -6 dB performance @ 2 Ghz EoHa With/without color ring A B Easy On Hard Off Retainer C D Seal + Retainer E F PCB Solder With/without color ring G H Straight +90 deg

2.92mm Feed-Thru Hermetic Seal Available Inventory: 328. 066-15-000. 2.92mm Connectors 066-15-000. Add to compare list Datasheet. Part # 1521-60193 2.92mm Female Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.012 Pin) Available Inventory: 104. 1521-60193.