Search Results for mdio interface

interface with simple, unshielded M12 cables, significantly lowering cabling expenses. Traditional analog-to-digital converters and costly PLCs are being replaced with low -cost IO-Link sensors and Masters that can connect multiple sensors—often up to eight—into a single network node. This cost-

Amphenol® MIL-DTL-38999 Series I Connectors were developed to meet the needs of the aerospace industry and provided the impetus for the development of the MIL-C-38999 specifications, which later was superseded by MIL-DTL-38999.

interface per cecc 20 230 series: 1.0/2.3 plug interface per mil-std-348 series: bnc plug customer outline drawing all other sheets are for internal use only. third angle proj. dwg size rev unless otherwise specified, dimensions are in metric and tolerances are: <0.5mm 0.5 - 6mm 6 - 30mm 30 - 120mm angles

Interface: Dual discrete 10/100/1000Mbps Ethernet channels . Conformance: IEEE 802.3 . Power: USB-A or USB-B receptacle (+5VDC @ 450mA/channel), POE, Type 2 Mode A (40mA @ 48VDC) or Customer defined . Environmental Specifications: ST, Operating Temperature: -40°C to 85°C Vibration: Mil 810 Transport . How to Order:

The ADC-8CH-160M-14 is an eight channel, 160 MSPS, 14-bit analog converter, with an integrated MIL-DTL-38999. The JESD204B I/O devices are to be directly coupled to a host FPGA.

The optical interface features 24F MT ferrule, securely attached to the module using a clip mechanism. The LEAP is faster, smaller, more cost and power-efficient than most conventional card-edge datacenter interconnects and is capable of speeds of up to 25Gbps with 300Gbps of total through-put that requires only one square-inch of board space ...

The Amphenol Home Optic (H-Connector) is a single fiber FTTH (Fiber to the Home) interconnect assembly designed to be used in direct burial or aerial connection to the NID (Network Interface Device). This compact threaded polymer housing connector provides an IP-68 water and dust seal and is assembled using either flat drop style cables or ...

Fillets at the interface (egress) of the trace to the pad are required to improve annular ring when the electrical design requires tight hole to pad configurations. 4.5 Trace Centering Center all traces between holes to optimize spacing. 4.6 Non Functional Pads For high speed applications, remove all nonfunctional pads.- 5.

Jar S • +1 (607) 643-1845 • Email: jsibrava@amphenol-aao.com amphenol-aerospace.com MECHANICAL SPECIFICATIONS CF-020400-42X

Accepts industry standard MPO/MTP® interfaces. Multiple flange options including standard, rotated, or reduced. Optional internal shutter mechanisms assist in eye safety requirements. Matched keyway option available. Custom options available on request. Features and Benefits. Durability: <0.2dB change

achieved through the craft interface using RS232, SNMP using Ethernet or a proprietary graphical interface using Ethernet. For operation of this interface, see the Craft Port documentation, SNMP Network Node Manager docu-mentation or Network Management Software documentation. This unit is shipped with default provisioning for all units in the ICB.

Connector interface: Î Ø11mm VDA-AK1 Î Ø11mm BNA Î code A (blue, purple) B (green) C (orange) Amphenol Amphenol Automotive Connection Systems Amphenol Automotive Connection Systems (Changzhou) Co., Ltd 20 Tianshan Road, Changzhou Jiangsu China. Phone +86/0519-85601880. Fax +86/0519-85118840

Centaur ExaMAX® backplane connector system meets industry specifications requiring higher bandwidth applications from 25Gb/s to 56Gb/s. The optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss while minimizing channel performance variation for every differential pair.

§ Signal Connector Interface § Current rating 1.5A per pin § Dielectric Withstanding Voltage: 2000V § Feature: PoE+, Cat5e § Power Connector Interface § Current Rating: 20A with 2.5mm² conductor; 16A with 1.5mm² conductors § Voltage Rating: 300V AC § RJ45 Connector Interface § Current Rating: 0.5A ENVIRONMENTAL

Superior electrical performance and high frequency capability Blindmate advantage and maintenance of an accurate phase length when mated Can be terminated to a multiple of cable types depending on the application Uses standard interfaces based on MIL-STD-348, and can be installed in any MIL-DTL-38999 size 8, 12 or 16 insert Unique “Float Mount” technology allows for consistent microwave ...

Amphenol MIL-DTL-38999 Series I Hermetic Connectors offer the highest performance capabilities for both general duty and severe environment applications meeting or exceeding MIL-DTL-38999 Series I requirements.

This standard Micro-D interface connector is equipped with Amphenol surface mount clip technology. It is fully intermateable with standard M83513 connectors but provides a reduced footprint allowing for increased contact density.

Sealing can be optionally provided at the MIL-DTL-38999 interface with up to 10-5 cc/sec performance; SHOCK AND VIBRATION: Sine Vibration - 10g Peak, 5-2,000Hz Based on a sine sweep duration of 10 minutes per axis in each of three mutually perpendicular axes. May be displacement limited from 5 to 44 Hz, depending on specific test.

Converts a single channel of DVI from copper to fiber and a single channel of DVI from fiber to copper. The copper DVI inputs and outputs are brought out on a shell size 19 MIL-DTL-38999 connector with high speed Quadrax contacts.

4. See sheet 2 for PCB interface definition. APPROVAL INITIALS DATE DRAWN BY CHECKED BY DESIGN ENG APPR BY DL KM 11.21.18 11.21.18 DRAWING NO. TMB-V9F2-XL1 Dongguan City, Guangdong P.R. China 523533 F I N I S H ( E S ) : Body: Passivated Center Conductor: Gold Plating Mounting Screws: Passivated TOLERANCES AND NOTES EXCEPT AS NOTED.XX DECIMALS ...