Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business!

Reset
23" Mount Network Bay Rack

23 inch Network Bay Racks feature a two-post narrow-rail steel design to support rack-mounted equipment in all standard types of network applications. Several configurations are available to meet a wide range of requirements. Low-profile base arrangement provides additional mounting height. Conforms to GR-63 Core Earthquake Resistance Criteria.

Product Number: 12623-01

For more information or to order a Network Bay Rack, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/rvdsfpid/121/rvdsfpvid/458

23" Mount Unequal Flange Rack

23 inch seismic-rated, unequal flange racks feature a two-post narrow-rail steel design to support rack-mounted equipment in all standard types of network applications. Several configurations are available to meet a wide range of requirements.

Product Number: 12300kw201

Bracket Cable Tie Assembly

Mounts on the rear of channel or angle racks to tie down vertical cable runs.

Product Number: 02106-09

MPO AOMs (Advance Optical Modules) can increase fiber density and decrease your footprint.

The Amphenol Network Solutions MPO AOMs (Advance Optical Modules) can increase fiber density and decrease your footprint. With single-mode (G.657.A BIF) or multimode (OM3 or OM4) versions available, these modules enable network planners migrate to 40/100/400/800G. The modules have a 12-fiber MPO input on the rear, terminated internally and routed to the LC duplex on the front.

Choose your fiber type, connector, and fiber protocol. MPO cassettes are available in either a standard type A or type B polarity with the wiring flipped inside the modules. Type A uses straight-through wiring (pin1 to pin1) and type A (key-up to key-down) MPO adapters. Type B uses crossover wiring (pin1 to pin12) and type A (key-up to key-down) MPO adapters.

To learn more about MPO Break Out Modules, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/c2-aoms-mpo-breakout-cassettes/rvdsfcatid/372

 The C2 patch and splice module combines splicing of up to 12 fibers within a compact footprint.

These C2 Patch and splice modules enable a totally modular splicing solution. The C2 patch and splice module combines splicing of up to 12 fibers within a compact footprint. Pigtails are included with each module.

To learn more about C2 Patch and Splice Modules, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/c2linx-patch-and-splice-modules/rvdsfcatid/372

C2 pre-terminated modules save significant time and cost in cable deployments.

C2 pre-terminated modules save significant time and cost in cable deployments. Cabled modules are available in LC and SC, single-mode configurations. Individual adapter ports are labeled for easy identification. Two cable options are available with cabled modules, conventional IFC or 24-fiber IFC cable. 

To learn more about C2 Pre-Terminated Modules, use an easy configurator to choose the right product for you, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/c2-aoms-pre-terminated-modules/rvdsfcatid/372

Amphenol Network Solutions splitter modules provide networks with vast configurability and flexibility.

Splitters are passive devices and an integral, widely used component in most fiber optic networks. Amphenol Network Solutions splitter modules provide networks with vast configurability and flexibility. Fiber optic splitters enable a signal on an optical fiber to be distributed among two or more fibers. They can be housed on the Amphenol Network Solutions C2X fiber distribution panel, where a market-leading number of splitters can be loaded onto 1RU, 2RU and 4RU panels. Ordering configurator shown below.

To learn more about C2 Splitter Modules, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/c2linx-patch-and-splice-modules/rvdsfcatid/372

The C2E chassis provides a solution that is dense, modular and tray based.

The C2E chassis provides a solution that is dense, modular and tray based. It is offered as either a dedicated Base-8 solution using the C2 Base-8 modules for MPO or MTP breakout modules, or a dedicated Base-12 version.

To learn more or to order the C2E Chassis, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/rvdsfpid/837/rvdsfpvid/2861

The C2E chassis provides a solution that is dense, modular and tray based.

The C2E chassis provides a solution that is dense, modular and tray based. It is offered as either a dedicated Base-8 solution using the C2 Base-8 modules for MPO or MTP breakout modules, or a dedicated Base-12 version.

To learn more or to order a C2E chassis and modules, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/c2e-1ru-base-12-fiber-distribution-chassis/2ru-base-12

The C2E chassis provides a solution that is dense, modular and tray based.

The C2E chassis provides a solution that is dense, modular and tray based. It is offered as either a dedicated Base-8 solution using the C2 Base-8 modules for MPO or MTP breakout modules, or a dedicated Base-12 version.

To learn more or to place an order for a C2E chassis and modules, visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/c2e-1ru-base-12-fiber-distribution-chassis/4ru-base-12

C2LINX Patch Modules - Multimode Duplex LC

Jumper to jumper interconnect or cross-connect is facilitated by LC 12 fiber, SC 6 or MPO adapter fiber modules. Adapter modules easily snap into the trays from the front or back of the chassis. Duplex LC adapters have been spaced apart to facilitate easier finger access and are aligned straight across the front of each module, which is critical for inspection with a standard fiber inspection scope and probe.

Every patch cassette includes Amphenol Network Solutions shuttle system to make servicing and maintenance as easy as possible. Users can install the fiber into the shuttle from the rear of the cassette before sliding the shuttle to the front for easy access and fiber termination. LC shuttles can accommodate 12 fibers while SC shuttles can accommodate six fibers. Each MPO patch cassette and accompanying shuttle can house four connections.

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs).

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs). Offered in multiple configurations such as patch, patch/splice, pre-terminated or modularly you can also deploy any mix of C2 AOMs into the C2X chassis. The 1RU chassis deploys up to 96 LC fibers and a module capacity of 4. 

The 1RU chassis is not available in pre-term or bulk spice options. 

To learn more or to order, visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/C2X/c2x-01u

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs).

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs). Offered in multiple configurations such as patch, patch/splice, pre-terminated or modularly you can also deploy any mix of C2 AOMs into the C2X chassis. The 2RU chassis deploys up to 192 LC fibers and has a module capacity of 8. 

To learn more or to order, visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/C2X/c2x-02u

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs).

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs). Offered in multiple configurations such as patch, patch/splice, pre-terminated or modularly you can also deploy any mix of C2 AOMs into the C2X chassis. The 3RU chassis deploys up to 288 LC fibers and a module capacity of 12. 

For more information or to order, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/C2X/c2x-03u

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs).

The C2X chassis is a streamlined bulkhead solution capable of deploying the C2X Advanced Optical Modules (AOMs). Offered in multiple configurations such as patch, patch/splice, pre-terminated or modularly you can also deploy any mix of C2 AOMs into the C2X chassis. The 4RU chassis deploys up to 432 LC fibers and a module capacity of 16 (384 LC). 

For more information or to order, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/C2X/c2x-04u

D-Sub

The standard and high density D-Subminiature connectors are available in five shell sizes offering a wide choice of contact positions: 9, 15, 25, 37, and 50 in standard density and 15, 26, 44, 62, 78, and 104 positions in high density. We offer filtered, sealed and compliant tail designs as well as custom crimp type or other terminations

Fiber Demarc Enhanced Access Enclosure (FDE)

Amphenol Network Solutions offers a comprehensive solution for Multiple Dwelling Units (MDU) applications based on our Fiber Demarcation Enhanced Access (FDE) box.

When the FDE indoor wall-mount enclosure is combined with products such as our HiD4 passives, fiber pigtails, splice tray adapter kits, and grounding options, you have a ready-made solution for a multitude of applications.

The Fiber Demarcation Enhanced Access enclosure has a low profile, side-by-side door design that provides an ideal environment for splicing and patching in indoor wall-mount applications. An integrated access door on the customer side of the enclosure provides a generous opening for a cleaning tool to reach the optical connectors resulting in a more craft-friendly design. The access door can be opened by hand without the use of tools.

MPO Connectors

This product can be made even more efficient with the addition of Multi-fiber Push-On (MPO) Cable Assemblies that deliver a Plug-n-Play solution for interconnecting elements in an optical network. The MPO connectors provide a quick and reliable link for multiple fibers (e.g., 12) in a single industry-standard connector.

Features:

  • Modular passive cassettes allow capacity to be scaled as needed
  • Access door on customer side allows easy cleaning tool access to optical ports
  • Two carrier cable entry ports with rubber grommets top and bottom for patchcord or multi-fiber cable exit
  • Grommet allows pigtails to be placed in the box after termination, one-at-a-time or as a group
  • Powder coated aluminum housing
  • Grounding and ground feed-through components
  • Security bolts and provisions for padlock hasps provided for both doors
  • Cable sheath clamps for carrier cables
  • Customer side port map label plus identification card enable clear designation for each port
  • Easy wall mounting; template and hardware included
FlexTrax™ is a flexible cable manager that comes in 1-foot sections that can be snapped together. 

FlexTrax™ is a flexible cable manager that comes in 1-foot sections that can be snapped together.  Each section comes with 2 mounting clips pre-attached that can be moved or removed if needed.  The patented design allows the channel to be bent in multiple axis while still providing access to the cable by overlapping, rotatable gates.

To learn more or to order, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/flx2-1ft

The 2" FlexTrax™ L-Bracket Hardware Kit is useful when the channel cannot be directly mounted to a surface,

The 2" FlexTrax™ L-Bracket Hardware Kit is useful when the channel cannot be directly mounted to a surface, but needs to change orientation or requires an adjustable offset. 

For more information regarding typical applications and to order FlexTrax product, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/flx2-brkt-kit-10

 

 

Use the 2" FlexTrax™ C-Clamp to quickly attach FlexTrax channel sections to flat or round surfaces.

Use the 2" FlexTrax™ C-Clamp to quickly attach FlexTrax channel sections to flat or round surfaces.  The C-Clamp has the option of two mounting surfaces that receive the mounting clips by sliding together and snapping on.  The channel may be orientated in 90° increments.

For more information or to order, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/flx2-c-clamp

Use the 2" FlexTrax™ End Clamp when joining the end of the channel to a flat surface such as a cable drop from overhead raceway.

Use the 2" FlexTrax™ End Clamp when joining the end of the channel to a flat surface such as a cable drop from overhead raceway or the top of a vertical cable manager.  Sharp steel teeth bite into metal or plastic and a rubber pad helps to keep the clamp from sliding.  The end clamp can be attached to the rear or side walls of the FlexTrax channel.

For more information, or to order the FlexTrax product, please visit Amphenol Network Solutions website:https://amphenol-ns.com/Product/flx2-end-clamp

The 2" FlexTrax™ latch attaches to the rotating gate part of the 1-foot FlexTrax section. 

The 2" FlexTrax™ latch attaches to the rotating gate part of the 1-foot FlexTrax section.  It adds a positive latch to securely hold the gate closed and contain cables.  It easily snaps into place and can be used on any portion of the FlexTrax assembly where extra retention is needed such as inverted drops.  Comes in packs of 10.

For more information or to order, please visit Amphenol Network Solutions website: https://amphenol-ns.com/Product/flx2-latch-10

1RU Fiber Shelf

Amphenol Network Solutions brings a new level of access, convenience, and security to its Fiber Splice Shelf, enabling quick and easy fiber splicing and connectivity for rack mount applications. This 1RU Fiber Shelf can be mounted in either a 19” or 23” rack. The adapter panel opening accommodates up to three single-width style LGX® modules or adapter plates. Cable termination brackets can hold cable diameters ranging from 0.25” to 0.50”. The design allows for expanded front accessibility with a removable top/front panel and sliding fiber management drawer with enhanced connector cleaning access, as well as rear access via a removable top/rear panel. The adjustable rack mounting brackets provide several mounting depth positions to accommodate a range of clearance requirements.

Key Benefits:

  • Powder-coated aluminum housing
  • Lightweight, sturdy design
  • Smooth sliding drawer with drawer stop and enhanced connector cleaning access
  • Removable top front hood enhances drawer access
  • Side mount cable termination hardware
  • Bend radius exit points
  • Fiber containment drawer design
  • Nine mounting depth positions using the unique bracket position guide
  • Hook/loop straps protect fiber jumpers during drawer movement
  • Catch feature to maintain drawer in the closed position
  • Ground feed-thru options left and right
  • Rack mounting hardware included
  • In some configurations, splice trays may be configured to accommodate passive devices such as CWDM modules or splitters
  • Optional drawer lock for added security
  • Full-width drawer label for accurate fiber identification
  • Removable rear panel provides improved access to cable/fiber tube attachment are

LGX® is a registered trademark of OFS FITEL, LLC

H-Connector Cable Assembly

Amphenol's H-Connector assemblies provide a robust and sealed connection solution for fiber to the home (FTTH) connectivity. The H-Connector end incorporates an SC/APC type connection within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The SC/APC connector mates to a standard adapter, providing a common interface for FTTH applications. Available with flat drop or traditional round style OSP cables, the H-Connector provides an ideal solution for direct burial, conduit, or aerial installations.

OSP DWDM Solutions - Tray Mounted

OSP DWDM Solutions - Tray Mounted

Amphenol Network Solutions offers a complete line of outside plant (OSP) passives for use in a wide range of optical network architectures.

The product family includes optical passives ranging from 4 to 40 channel counts.  Modules can be partially or fully configured with DWDM channels and can also include optional features for monitoring, upgrades, and express-through bands.  The packaging comes in two forms, the HiDT (channel counts 10 or less) and the OSP AOM (channel counts 12 and higher), both providing stable optical performance across a wide operating temperature range for OSP deployment.

Amphenol OSP passive products are available in kits with accessories to facilitate installation into field splice enclosures.

Features

  • Color coded fibers and wavelength labels on each fiber provide easy identification
  • Custom port features available
  • Single end fiber ports for easy routing and splicing
  • 250um or 900um fiber leads are available to facilitate splicing applications

Applications

  • Metro Ethernet
  • HFC / Fiber Deep
These L-Brackets provide ample mounting for both Trunk cables and IFC on the read or the HyperX Frame (HYP-F30)

These L-Brackets provide ample mounting for both Trunk cables and IFC on the read or the HyperX Frame (HYP-F30).  We advise using 4 sets on a fully loaded HyperX frame with up to ten 4RU chassis.

To learn more or to order a HyperX system, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/kitbrkt-3-hyperx-pre-term-tie-off-end-panel-mount

The 13-inch cable manager is to be used with the HyperX when maximum density is required.

The 13-inch cable manager is to be used with the HyperX when maximum density is required.   The full frame solution uses a -13L and a -13R on each side to provide a full "W" routing option. The Amphenol Network Solutions HyperX is a high-density interconnect or cross-connect ODF with up to 3,456 terminations.

To learn more or to order a HyperX system, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/cable-manager-13w-slack-storage-trough-guard-box-left/rvdsfcatid/158

The 13-inch cable manager is to be used with the HyperX when maximum density is required.

The 13-inch cable manager is to be used with the HyperX when maximum density is required.   The full frame solution uses a -13L and a -13R on each side to provide a full "W" routing option for up to 5,760 LC fiber terminations.

To learn more or to order a HyperX system, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/hyperx-13-inch-cable-manager/rvdsfcatid/158

The HyperX 8-inch cable manager comes with a door, iso pad, and rear cover guard.

The HyperX 8-inch cable manager comes with a door, iso pad, and rear cover guard.  It's to be used with the HyperX when maximum density is required.

For more information or to order a HyperX system, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/hyperx-cable-manager-8w-left

The HyperX 8-inch cable manager comes with a door, iso pad, and rear cover guard.  

The HyperX 8-inch cable manager comes with a door, iso pad, and rear cover guard.  

To learn more or to order, please visit the Amphenol Network Solutions website: https://amphenol-ns.com/Product/hyperx-cable-manager-8w-middle-expansion-only