Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
GHPNA Coaxial IPTV Splitters

GHPNA Coaxial IPTV Splitters

Holland's GHPNA splitters have been specifically designed to work in HPNA environments. The low port-to-port isolation allows HPNA communication signals to pass through the splitters to set top boxes with as little signal loss as possible. At the same time the GHPNA Series splitters provide good return loss and

FEATURES:

• Available in 2-way, 3-way, 4-way and 6-way splitters • HPNA Compatible
• Low Port to Port Isolation(for HPNA communications)
• Meets SCTE Environmental and Mechanical Requirements
• Expanded Pass Band (for future communication channels)

 

DATA SHEET:

Click to Review the Data Sheet

 

F Connector, Drop F Connector, QC2, Connector

The QC II F-Connector is a universal compression connector that is ideally suited for professional and consumer use. The simple to use one-piece design provides a secure 360 degree compression seal resulting in maximum RF shielding performance. The all metal design of the connector body and nut allow for unparalleled electrical and mechanical performance. The detachably coupled advanced polymer compression system is pre-positioned to ensure a consistent fit with the cable and is color coded to allow differentiation between different cable series.

High-performance Primary CATV isolator and surge protector

PROTECTION & PREVENTION

Holland Electronics offers a full line of CATV isolators and surge protectors.

The CPI-WHP is an IEC Class Level 5 isolator offering the surge protection performance necessary to ensure the highest telecom equipment survivability. The device protects cable modems, STB's and other CPE and plant equipment from damage due to fast transients and spikes from electrical storms and power surges.

High winds, thunder, rain showers and flooding are commonplace in regions with high electrical storm activity. The CPI-WHP is rated to IP67 standards for protection against wind-blown objects and moisture - up to full submersion in a meter’s depth of water.

 

DCWG 1.2 GHz Series of High Quality Directional Couplers

The DCWG 1.2 GHz Series of high quality directional couplers have been developed to meet the rigorous requirements of MDU distribution. The solder-back design, high return loss and low insertion loss make the DCWG-SB Series ideal for any RF distribution application. Advanced PCB design assures consistent performance. The available tap values for the DCWG-SB series include: 4, 6, 9, 12, 16, 20, 24, 27, 30 dB.

• Solder Back Construction
• Wide 5 - 1218 MHz Frequency Range
• Nine standard dB Values Available
• 130 dB RFI Shielding
• High Return Path Isolation
• High Return Loss
• Precision Machined Threads

These couplers manage RF distribution over varied COAX run lengths with varied power requirements in homes, MDU’s and businesses

DATA SHEET

Click to Review the Data Sheet

 

Direction Couplers

The BDC digital directional coupler line has led the broadband / CATV in quality and design for over a decade.  Weather sealing, environmental protection, mounting options and superior electrical RF performance quickly made the BDC series the industry standard for Broadband Directional Couplers.  Available in a multitude of configurations, losses and housing styles.

BDS102H Digital Splitter

The BDS102H digital splitter line has led the broadband / CATV in quality and design for over a decade.  Weather sealing, environmental protection, mounting options and superior electrical RF performance quickly made the BDS100 series the industry standard for Broadband Splitters.

DOCSIS Passive

The DOCSIS Passive is the next generation home networking gateway device allowing 100% passive broadband installation with nearly unlimited outlet potential.  A preferred alternative to active in the home, this device can accommodate multiple STB's and MoCA Controllers without power supplies or signal amplification.  This technology reduces installation costs, dramatically improves reliability and increases system performance by eliminating noise, ingress and egress.

G-PF-59 Precision Push-On Adaptor

The G-PF-59 is a lab-grade, high-performance push-on F-connector adapter. The G-PF-59 has been specifically designed for high-volume testing environments demanding production efficiency, durability and reliability. This adapter utilizes precision specifications, and a special high-cycle, low-tension ground spring, allowing for low insertion force and high volume testing throughput. The G-PF-59 is particularly volume effective with high-density adapter fixtures.  In addition, a high-strength center conductor is used to ensure
high-cycle life expectancy.

•    High-Cycle Life - Exceeds 3,000 Insertions
•    Low Insertion Force for Production Throughput
•    High-Strength Center Conductor Extends Life
•    Chamfered Center Pin for Faster Insertions
•    Durable All-Brass, Nickle-Plated Construction
•    9mm F-Female Barrel Allows Panel Mounting
•    Easy-Grip Knurled Outer Body

DATA SHEET:

Click to Review Data Sheet

 

HFS-4 & HFS-4D Splitters

Broadband Satellite Splitters

The HFS Series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz while maintaining high isolation. The HFS-2 / HFS-4 power pass to one port and the HFS-2P / HFS-4P pass power to all ports.

FEATURES:

• 5 - 2150 MHz Performance
• Power Passing to One or all Ports
• High Port-to-Port Isolation

 

The HFS-*D series high-frequency splitters have been designed with diode steered circuitry, which allows the DC power to pass from any output port to the input port and prevents DC backfeeding.

FEATURES:

• 5 - 2150 MHz Wide Band Operation
• Diode Steered
• High Return Loss
• Flat Frequency Response
• Flat end F-ports with 1” spacing
• Solder-Back Case (-130 dB RFI Shielding)

DATA SHEET

Click Here to Review the Data Sheet

 

HiD4 Cassette

The HiD4 is an industry leading high-density, miniature shelf mount cassette for passive applications such as splitters or CWDM MUX and DEMUX applications. The miniature HiD4 footprint provides full functionality with up to 14 front facing LC/APC or LC/UPC ports and its mounting is compatible with LGX® shelves. At approximately 3″ deep, and half the width of a single LGX module, this package provides significantly improved port density when compared with conventional LGX cassettes. The cassette’s unique housing design and increased port count available on the front faceplate of the device allows for port groupings by function, such as; commons and upgrades, wavelength channels and test/monitoring ports providing added versatility for the network architecture.

Features

  • Industry leading miniature packaging
  • LGX mounting compatible
  • Up to 14 LC ports on the faceplate enables design and configuration versatility
  • Front and side facing labels improve port identification
  • Port layout designed to optimize patch cord management
  • High channel isolation
  • Low insertion loss
  • Rugged metal housing
  • Wideband 1310nm express port
  • DWDM upgrade port available
  • Optional tests port

LGX® is a registered trademark of OFS FITEL, LLC

HiDT in medium splice tray

The HiDT has redefined the industry standard for compact splice tray mounted passive multi-component modules. HiDT tray modules are designed to integrate directly onto the All Systems Broadband Universal Splice/Component Tray (UST) with no intermediate mounting fixtures. The HiDT housing allows for up to 14 fiber ports, all exiting one end of the package. The innovative design of the HiDT housing offers improved port count and component capability creating design advantages for optical networks, while the small overall footprint allows for installation of two modules on a single splice tray, improving density in field deployment applications.

Features

  • Industry leading miniature packaging – enables two modules to mount to a single ASB Universal Splice/Component Tray
  • Up to 14 fiber ports enables design and configuration versatility
  • Color coded fibers and wavelength labels on each fiber provide easy identification
  • Low insertion loss
Thermometrics CL Series of Inrush Current Limiting Thermistors

Thermometrics CL Series of Inrush Current Limiting Thermistors consist of a disc thermistor with uninsulated lead-wires, and are used to control inrush current when switching power supplies. The main purpose of limiting inrush current is to prevent components in series with the input to the DC/DC convertor from being damaged. Typically, inrush protection prevents nuisance blowing of fuses or breakers as well as welding of switch contacts.

 

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Features:

  • Low cost, solid state device for inrush current suppression
  • Excellent mechanical strength
  • Wide operating temperature range: -58°F to 347°F (-50°C to 175°C)
  • Suitable for PCB mounting
  • Available as a standard with kinked or straight leads and on tape and reel to EIS RS-468A for automatic insertion
  • Low steady resistance and accompanying power loss
  • Small size
  • Low cost solid state sensor
Broadband Premises Amplifier

Welcome to the IPA1000 series premises amplifier, the one that started the revolution.  The first of its kind to provide an integrated solution with passive and active ports, this device drove the "Home Run" installation standard practiced by nearly every CATV operator in the United States.  For over a decade, this premies amplifier has lead the industry in quality, features and cost, becoming a staple of the broadband industry.

Enclosures

The Infinity Premises, IPE series enclosures were designed with the technician in mind.  Completely reimagined using the real world needs for technicians and installers, the IPE series completes the Infinity Premises System, integrating installation hardware to work as a system.  The QuicMount Rail allows passive and active devices to snap in without hardware.  Cable Retention Slots allow installation to occur outside of the enclosure and simply slide into place.  Continuous Bosses, modular accessories, weather and UV resistant materials are just a few more of the ground breaking innovations designed into the IPE Enclosure Series.  

MoCA Amplifier

The IPA2000 Series MoCA Amplifiers are designed to maximize the MoCA frequencies within the premises while optimizing the RF band simultaneously.  Completely redesigned with innovate features such as Data Stabilization, CrossTalk, and DataComm, the IPA2000 series has become the new standard in CATV amplification.  

This IPA2008DSL-RSVF has 8 active outputs and 1 passive data port.

MoCA Filter

The POE-F201C MoCA filter combines superior surge protection in a compact housing to be utilized a the point of entry or beyond legacy equipment in the home.  Not only does the POE-F201C come in an in-line barrel housing, this MoCA filter can be integrated into nearly every premises device in the ABS product line including ground blocks, splitters, amplifiers, and gateway devices.  

NTC Thermistors - Radial Lead | Thermometrics

Thermometrics offers point-matched Radial Lead Disc Thermistors with bare lead wires in a wide range of material systems.

NTC Thermistors- Radial lead Applications Description
Thermometrics -Uncoated Disc Radial Leads NTC Thermistor Type RL10 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL14 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL20 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL30 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL35/40/45 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type SA "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Interchangeable thermistor with bare lead-wires.

By Amphenol Advanced Sensors | Thermometrics, Inc.

PTF Series of PTC Type Thermistors

The Thermometrics PTF Series of PTC Type Thermistors consists of a range of radially-wired bare PTC disc thermistors. They are designed for general purpose over-current and short circuit protection.

 

Features

  • Low cost solid state fuse
  • Available in a broad range of resistances, transition temperatures and voltage ratings
  • Exhibits large positive increases in resistance with temperature
  • Resistance/temperature characteristic is infinitely repeatable and has no hysteresis associated with its action
  • Proven quality and reliability over many years of manufacturing

 

By Amphenol Advanced Sensors | Thermometrics, Inc.                 

 

PTO Series of PTC Type Thermistors

The Thermometrics PTO Series of PTC Type Thermistors consists of a range of radially-wire bare PTC disc thermistors for current regulation, circuit protection and temperature measurement and control. Available in a broad range of resistances, transition temperatures and voltage ratings.

 

Features

  • Low cost solid state sensor
  • Available in a broad range of resistances, transition temperatures and voltage ratings
  • Exhibits large positive increases in resistance with temperature
  • Resistance/temperature characteristic is infinitely repeatable and has no hysteresis associated with its action
  • Proven quality and reliability over many years of manufacturing

 

By Amphenol Advanced Sensors | Thermometrics, Inc.                 

 

YM Series of PTC Type Thermistors

The Thermometrics YM Series of PTC Type Thermistors consists of a range of radially wired PTC disc thermistors with silicone resin coating with a wide range of operating current levels. Designed for general purpose over-current, overvoltage and direct over-temperature protection.

 

Features

  • Fast switching times
  • Operation up to 265V rms
  • Wide range of operating current levels
  • Excellent stability
  • Fail-safe operation
  • Solid state
  • High performance barium titanate ceramic
  • Suitable for automatic PCB insertion

 

By Amphenol Advanced Sensors | Thermometrics, Inc.                 

 

Thermometrics NTC Thermistors Surface Mount Devices (SMD)

Thermometrics NTC Type Surface Mount Devices (SMD) are intended for temperature measurement, control and compensation. They are suitable for standard soldering techniques and availabe in a range of sizes, including 0402, 0603, 0805 and 1206.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • Nickel barrier tin-plated terminations for soldering
  • High sensitivity to changes in temperature
  • Wide operating temperature range -40°C to 125°C
  • Rugged construction
  • Excellent solderability without “tombstoning”
  • Glass-coated ceramic between electrodes for improved stability
  • Supplied in tape-and-reel packaging
  • Available in other material systems