Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
1.0/2.3

The compact design of the 1.0/2.3 connector series permits dense connector packing. They are ideally suited to applications where space savings is critical. Versions are available with threaded coupling mechanisms which provide positive mating or a unique push-pull coupling system which allows quick installation. Amphenol 1.0/2.3 coaxial connectors operate from DC-10 GHz. Common applications are amplifiers, base stations, routers and switching equipment.

1.85mm_Series

SV Microwave's extreme frequency 1.85mm connectors were designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. 

Applications:

  • High Speed Digital
  • Instrumentation
  • Military
  • Aerospace
  • Satellite Communication Equipment (SATCOM)
  • Cable Assemblies
  • Test and measurement

Features and Benefits:

  • Excellent performance DC to 65 GHz
  • Compatible with 2.4mm Connector Series
  • Air Dielectric; Captivated Center Contact
  • Ruggedized Construction for Repeatability and Reliability

 

View All

 

LiteTouch RF Solderless Connectors

Don't suffer depression from heavy compression!

SV now offers a complete line of high frequency coaxial / surface mount PCB connectors that meet the industry need for high performing, highly reliable solderless connectors for precision thin substrate mounting.  As frequencies increase and board substrates become thinner, the standard solderless PCB compression mount connectors can create undesirable results on thin (< .010”) dielectric PCB.  SV's LiteTouch PCB connector addresses this issue by maintaining a solderless connection while keeping the board material intact.  Current configurations include 2.92 mm, 2.4 mm, and SMA.

Features / Benefits: 

  • Solderless PCB compression mount for fast and easy installation (available with screws)
  • Non-destructive engagement on soft or thin (<.010”) dielectric cores
  • Series: SMA, 2.92mm, 2.4mm and 1.85mm
  • Custom optimized PCB footprint design through simulation available
  • COTS versions available through distribution

Applications:

  • Internet of Things (IoT)
  • 5G Wireless Infrastructure
  • Smart Cities and agriculture
  • Embedded computing
  • Precision thin substrate mounting
  • Ideal for high speed PCB materials
  • RF test and measurement
  • Stripline, microstrip and coplanar waveguide PCB launch

View All

 

 

 

4.1/9.5

Amphenol RF offers a full range of 50 Ohm 4.1/9.5 connectors, adapters, and cable assemblies. These interconnect products are engineered for the wireless market and ideal for applications requiring low passive intermodulation, or PIM. The Amphenol version features a patented ultra-slim push-pull coupling system which allows quick installation and ensures positive locking and high retention.

4.3/10

Amphenol RF offers a full range of 4.3-10 connectors and adapters, which are engineered for the wireless market and are ideal for applications requiring low passive intermodulation, or PIM.

7/16

The 7/16 series provides superior performance for both return loss and intermodulation distortion (IMD). These connectors are very robust, extremely stable and mostly with waterproof specifications, making them ideal for applications where vibration resistance and environmental protection is important.

Amphe-BTS

Amphenol Industrial Operations introduces a new power connector family, the Amphe-BTS. This innovative connector series is designed for the next generation of base stations.

Amphe-BTS is a circular connector based on the MIL-C-26482 series 2 with clip retention contacts. Features brass shell construction for greater corrosion resistance, provides EMI shielding, is shock & vibration resistant, and uses screw termination contacts making it well suited for field installation.

We offer the Amphe-BTS in our standard 2-way 48V DC power configuration but also manufacture a 48V DC 2-way reverse gender and a 3-way 400VDC/250V AC connector. Standard current for all variations is 10A.

Amphe-Lite

The Amphe-Lite™ Connector Series is designed for communications equipment manufacturers with signal, power, RF or fiber optic interconnect requirements in harsh environments such as communication towers, outdoor and roof-top applications. This commercial composite connector series is ideal for communications equipment, manufacturing process control and medical equipment. The Amphe-Lite™ series offers the highest performance capabilities for severe environment applications, yet is cost effective enough for general duty and non-environmental applications. Amphe-Lite™ also offers a non-magnetic variation. The non-magnetic Amphe-Lite™ is another option of the highly reliable industrial multi-pin interconnect that is ideal for an array of applications. It is one of the few 100% non-magnetic connectors available today.

Amphe-OBTS

Amphenol Industrial Products Group introduces a new power connector family, the Amphe-OBTS. This innovative connector series is designed for the next generation of base stations.

Amphe-OBTS is a circular connector based on the MIL-C-26482 series 2 with clip retention contacts. Features zinc shell construction, provides EMI shielding, is shock & vibration resistant, and uses screw termination contacts making it well suited for field installation.

We offer the Amphe-OBTS in our standard 2-way 60V DC power configuration but also manufacture a 60V DC 2-way reverse gender and a 3-way 400VDC/250V AC connector. Standard current for the two pole version is 26A per contact while the three pole version supplies 16A per contact.

Amphe-Power

The Amphe-Power® Series consists of three of the time-tested and reliable families of Amphenol Industrial Connectors, all of which are MIL-5015 styles, medium to heavy duty cylindricals. This series, enhanced with RADSOK® sockets, can now handle up to 50% higher amperages. Current Amphe-Power® product lines support from 50A to 1000A continuous duty.

Amphe-PRB

The Amphe-PRB is a plastic reverse bayonet connector. Designed for one, two, or three phase applications with up to five contacts including one for ground. This series lends itself well to a wide variety of applications in alternative energy, telecommunications, or anything that uses an electric motor like electric or hybrid vehicles. The PRB series is ideal for in field installation with crimp and set screw terminations using standard contacts or our patented RADSOK® sockets as an option. The Amphe-PRB is touch proof and rugged enough to withstand exposure to moisture with an IP67 rating.

Amphe-TVS

The Amphe-TVS connector is designed for communications equipment manufacturers with power interconnect requirements. Applications for this product would be in harsh environments such as towers, outdoor and roof-top applications. The Amphe-TVS connector offers the highest performance capabilities for severe environment applications. There are 2 insert patterns to choose from: The 2 pole for DC power and the 3 pole for AC power.

APB300 PowerBlade Connector

300A SINGLE POLE /150A DUAL POLE    (P/N 612040001)

The APB300 dual pole, feed-through socket design delivers 300A current capability and is hot pluggable. The dual pole contact design allows both contacts to be used together or individually. The connector is mounted using the 4 holes located at the bottom.

  • Single or Dual Pole
  • 150A at 48V (Dual)
  • 300A at 48V (Single)
  • UL
  • Full production
  • Can be mounted on either a busbar or a PCB
  • Represents a cost reduction over the TE Connectivity product and lead time improvement
APB500 PowerBlade Connector

500A SINGLE POLE  (P/N 622440002)

The APB500 connector accommodates a 0.125” thick plated busbar for a separable connection and supports blind mating. The guide plate permits a slightly misaligned busbar to connect and provides over stress protection for the contact.

  • Single Pole
  • 500 A at 54V
  • UL
  • Full production
  • Can be mounted on either a busbar or a PCB
  • Represents a major cost reduction over the TE Connectivity product and lead time improvement
Cable Reel

Amphenol Fiber Systems International (AFSI) offers the rugged, deployable ARES (Amphenol Reel Enhanced System) reel for tactical fiber optic network applications.

The ARES reels are made with reinforced glass nylon providing a rust-resistant, lightweight and durable reel for storing and deploying fiber optic cable assemblies. Integrated slots on the reel allow them to be stacked together for storage and transit. The ARES reel also has separate payout and storage areas allowing the operator to deploy cable needed rather than the entire stored length.

AFSI’s ARES reel comes in a variety of sizes to support multiple cable lengths and types. In addition, cleaning kits can be specified to support all popular harsh environment connectors including AFSI’s TFOCA, TFOCA-II®, TFOCA-III®, TACBeam® and Pierside. Finally, AFSI offers a suite of transit cases, payout stands and backpacks as optional accessories.

Features and Benefits:

  • Meets A336463 CECOM reel drawing requirements
  • Flanges and drum are molded in one piece
  • Greater impact resistance
  • Will outperform MARS reels on drop tests
  • No damage to AFSI ARES reels, minor cracks to MARS reel
  • Can be dropped higher and withstand colder temperatures
  • Can be stacked onto OCC MARS reel
  • Can be stacked on original ARES reels
  • Professional look tool kit can be included
  • Multiple take-up flanges (divider on drum and crown)

Applications

  • US Army and Marine Corps Tactical Deployments
  • Deployable Broadcast Networks
  • Mobile Tactical Shelter Systems
  • Disaster Recovery
BergStik 2.54mm - Basics

BergStik® 2.54mm unshrouded headers are available in surface-mount (SMT), through-hole (THT), press-fit, stacking and pin-in-paste (PIP) versions. Designed in single and double row, they are available in straight or right angle options, from 2 to 72 positions.

Featuring a "breakaway" design, each connector can be cut or broken to length to suit the application profile. The maximum current rating is 3A per contact.

This product range is extended with BergStik® 2.54mm unshrouded vertical headers in 0.25μm plating, available in standard sizes. It offers an economical solution for various applications. It is also specified up to 100 mating cycles.

BergStik® product range provides Board-to-Board, Wire to-Board and Cable-to-Board interconnect solutions for all electronic equipment and devices.

CFP2

Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.

CFP4

Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6 mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.

CXP

The Amphenol CXP connectors come in a one-piece press-fit assembly system with twelve channels of up to 20 Gbps, resulting in 240 Gbps of total bandwidth. This allows our CXP to go beyond the 100 Gigabit Ethernet IEEE 802.3b,a and the InfinibandCXP12x QDR standards. The CXP series is the fastest and most dense I/O on the market today. It enables pluggable copper or optical cables to increase the flexibility of system level hardware for end users, and offers reduced cross-talk. The CXP interconnect system offers plug-to-receptacle containment with the various EMI gasket and EMI spring finger options, and is ideal for network switches, routers, servers and storage devices.

eQSFP

The eQSFP interconnect system is comprised of a 38 position 0.8 mm pitch SMT connector, and a press-fit cage. With four channels of data in one pluggable, the system interface is capable of transferring data up to 28 Gbps / Channel, and replacing up to 4 standard SFP+ receptacles. These features result in greater port density and overall cost savings over traditional SFP+ products. Supporting standards include, Gigabit Ethernet, InfiniBand, and SONET/SDH with different data rate options. eQSFP includes cages in single and ganged configurations with multiple heat sink options supporting various thermal requirements and port status with light pipes options.

ExpressPort QSFP

The ExpressPort QSFP+/QSFP interconnect system and the stacked combos are comprised of 38-position 0.8mm pitch SMT connectors, as well as press-fit cages intended for external connections. Each port offers 4 channels which increases port density and contributes to cost savings. The ExpressPort QSFP+ E-Series connector family is rated at 28 Gbps per channel. It features as tamped and formed contact design providing improved mechanical durability, an integrated grounding structure,and resonance dampening features for superior crosstalk performance. The contact design is optimized for a smooth impedance profile resulting in improved SI performance.

ExpressPort SFP

Amphenol’s ExpressPort SFP+ 1xN connector, when combined with the ExpressPort SFP+ cage, provides data transfer speeds of up to 25 Gbps. This is the highest speed in the market for the SFP+ series. The design of the ExpressPort SFP+ connector minimizes impedance discontinuities and reflections at high data rates, and provides a 10 to 20 dB improvement in Near-End Cross talk. The connectors accept multiple transceivers per SFF-8431 and are compliant with SFF-8081 and SFF-8083 speci- fications. Our unique ExpressPort SFP+ cage features enhanced EMI shielding options in the form of metal spring fingers or elastomeric gaskets. Ganged versions are compliant with the SFF-8433 standard. The ExpressPort SFP+ 2xN combos consist of an integrated stacked connector system and a cage with compliant press-fit pins or solder tail.

Extreme RF PCB Edge Connectors with Legs

SV offers a complete line of extreme frequency (DC - 50 GHz) coaxial / RF edge launch PCB connectors with through hole legs for high mating cycles.  These high speed RF test connector configurations include SV's high frequency 2.92 mm, 2.4 mm and SMA series and meet the need for high performing, highly reliable precision connectors.  Additionally, SV offers pre-tinned versions for fast and easy soldering by eliminating a step during installation onto the PCB.  These connectors are ideal for the 5G wireless development applications.

Features / Benefits: 

  • High frequency PCB connectors
  • Edge launch options with and without through-hole legs available
  • Pre-tinned options available (denoted with '-TD')
  • Series: SMA, 2.92mm, 2.4mm, 1.85mm, SMP, SMPM, SMPS

Applications:

  • Internet of Things (IoT)
  • 5G Wireless Infrastructure
  • Smart Cities and agriculture
  • Embedded computing
  • High density stacked PCB applications
  • High density multiport applications

 

View All

 

 

 

FAKRA

The German and American automotive industries have standardized a high-performing, cost-effective RF connector based on the FAKRA and USCAR standards for automotive telematics. Utilizing a standard metal SMB connector embedded within a plastic housing that features multiple colored codes for easy identification, FAKRA connectors are designed to perform up to 6 GHz and meet the particular mechanical and environmental requirements of the automobile industry.

Flat Cable

LF Cable Assemblies

HD-BNC

The HD-BNC product series features the trusted, push and turn interface of a traditional BNC, providing tactile feedback and a positive lock for quick and guaranteed mating.

HD-EFI

The HD-EFI connector series is a solution for board-to-board RF applications, especially for the broadband and wireless marketplaces. The HD-EFI interface utilizes a proprietary configuration that allows for an extremely stable RF signal over the full axial range of the connector system. It utilizes a generous “float” to compensate for the axial and radial misalignment due to packaging tolerances. 

Mini-BNC

Amphenol RF's Mini-BNC product series allows higher connector densities while preserving the positive characteristics of the full-size 75 Ω BNC. This allows 40% more interconnects in the same area. The Mini-BNC provides the same positive locking bayonet system found on the BNC. These connectors were designed to be field installed and repaired. The Mini-BNC is a drop-in replacement used in Telco DS3/DS4 applications.

Mini-SMB

Amphenol's Mini-SMB 75 Ohm product series provides broadband capability through 2 GHz. Its snap-on design offers a quick connect/disconnect and utilizes die cast components in non-critical areas to provide a low-cost solution.

MiniSAS

The Mini-SAS external I/O connector system consists of a die-cast metal cage and a Compact Multi Lane SMT connector. The Mini-SAS can support Fiber Channel and Infini-Band standards, making it the perfect solution to the ever-growing demand of high-speed mass storage systems, servers, and storage area networks. Providing four serial send/receive channels per port, this connector system provides signal speeds of 6 Gbps per channel across the connector interface and is designed to satisfy the needs for gigabit serial data transmission applications. The connector satisfies the requirements of the INCITS T10 SAS 2.0 and SAS 2.1, and is also compliant with SFF-8086 and SFF-8088. The cage is mounted separately to the body so that the stress imposed by insertion and removal of the cable plug does not affect the signal/body solder joints. The connector is available with unique solder hold-down tabs designed to provide additional mechanical robustness in demanding applications.