Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business!
Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.
Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.
As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.
Amphenol ICC's new 1.2mm pitch wire to board connectors are low profile (mated height of 2.50mm) and compact with pin count availability for 3, 4 and 6 pin counts. The plug and receptacle uses a frictional mating method to provide the retaining function to enable up to 20 mating cycles.
The low profile and compact design of the connector gives its advantage in applications where space is tight and the enclosed receptacle profile make sure that the side entry matings are easy in tight spaces. The additional polarized key slots prevent any misalignment issues between the plug and receptacle.
Amphenol ICC's 1.25mm pitch wire-to-board connector series is designed for a wide variety of applications in Industrial, Automotive and Consumer markets.
The range consists of terminals, crimp housings and PCB headers in straight and right angle, surface mount and through mount configurations. It is a single row design, available with from 2 to 15 circuits. A crimping application tool is also available for wire harness assembly.
Unlike many other products for the same applications, Amphenol ICC's 1.25mm Wire-To-Board range conforms to the EU Industry Safety Standard, PCB header material meets halogen free requirements and the products can be operated in the temperature range from -40°C to +105°C.
The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and multi-purpose Control applications such as:
Standard Features:
The AAS-AQS-UNO Engineering Evaluation Board is used to evaluate the Telaire air quality sensors. It can support T9602 temperature and humidity sensors, T6713 carbon dioxide sensors, SM-PWM-01C dust sensors and other sensors from the Amphenol range. Moreover, the OLED display and Bluetooth output can be supported at the same time. This evaluation board is designed to speed up evaluation and development of the relevant sensors. The serial output can be configured to send sensor data to a PC over the USB connection for recording and analysis in 3rd party software.
Features
By Amphenol Advanced Sensors | Telaire
The AMMC (Amphenol Micro-Miniature Coaxial) connector series is a low profile (1.4 mm of the board) series with an extremely small board footprint (2mm x 2mm). This series is used in applications with 50 Ω impedance requirements and has a performance from DC to 6 GHz. The coupling style of the AMMC connector series is snap-on for secure and easy mating.
Amphe-309 series includes plugs, connectors, receptacles, inlet, and mechanical interlocks, all of which comply with the requirements of IEC 603 09-1 & 2, EN 60 309-1 & 2, BS 4343-2 1992, and UL 1682 & 1686.
The Amphe-309 consists of both IP44 (Splashproof) and IP67 (Watertight) devices for 16A, 20A, 30A,32A, 60A, 63A, 100A and 125 A.The series range covers all clock positions in use from low profile, watertight, and Heavy Duty solutions.
Approved and certified by CE, UL, CSA and CCC, Amphe-309 covers commercial and industrial applications for international markets, as well as, the North American market.
Features & Benefits
· Plug, receptacle, connector, inlet and mechanical interlock
· 16A to 125A, up to 690V or 500V DC
· Low voltage <50V available
· ATEX/IECEx version available
· Custom Amphe-309 cable assemblies
Specifications
· IP 44
· IP 67
· UL, CAS, CE certified
FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS
BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.
The BergStak HS™ series meets the new 25Gb/s performance requirement.
BOARD-TO-BOARD SOLUTION FOR HIGH SPEED AND HIGH DENSITY APPLICATIONS
BergStak+™ 0.80mm is designed to be the next generation PCIe 4.0 compliant mezzanine connector system. It is fully compatible with the existing BergStak® 0.80mm product recommended by the Open Compute Project (OCP).
Backward mateable and footprint compatible with existing BergStak® 0.80mm
Available in 80 and 120 positions. Other position
Available in 5, 8, 12 and 16mm stack heights
The BergStak® product range is expanded to include 0.5mm mezzanine connectors.
Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments.
Designed with scoop-proof housing, the terminals are protected from damage when parts are mated.
BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector.
BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.
FLEXIBLE SOLUTION FOR HIGH DENSITY APPLICATIONS
Amphenol ICC's BergStak® 0.8mm is a flexible solution designed for high speed and high density, parallel board-to-board connector system with 16 PCB stack heights in 9 sizes up to 200 positions.
Housing and terminal profile guarantees support of up to 12Gb/s
Vertical versus vertical mating configuration
40 to 200 position sizes in 20 position increments
5mm to 20mm stack heights in 1mm increments
BergStik® 2.54mm unshrouded headers are available in surface-mount (SMT), through-hole (THT), press-fit, stacking and pin-in-paste (PIP) versions. Designed in single and double row, they are available in straight or right angle options, from 2 to 72 positions.
Featuring a "breakaway" design, each connector can be cut or broken to length to suit the application profile. The maximum current rating is 3A per contact.
This product range is extended with BergStik® 2.54mm unshrouded vertical headers in 0.25μm plating, available in standard sizes. It offers an economical solution for various applications. It is also specified up to 100 mating cycles.
BergStik® product range provides Board-to-Board, Wire to-Board and Cable-to-Board interconnect solutions for all electronic equipment and devices.
We offer a number of accessories for the Telaire line, including calibration kits, enclosures, software and cables.
Calibration Kits
The Calibration Kit Model T2075NG includes the necessary components for calibrating the Telaire® 7001 and Ventotstat 8000 series models. The kit is housed in a carrying case (calibration not gas included). Calibration Kit Model T2076NG calibrates the Vaporstat T9002.
Accessory Enclosures
Telaire offers three enclosures to expand the Ventostat and Vaporstat installation options: Model T1508 Aspiration Box, Model T1505 Splash Resistant Enclosure, Model T1551/T1552 Outdoor Air Enclosure.
Software
Windows based VG Graphing Software allows you to easily download your IAQ measurements and customize graphs.
By Amphenol Advanced Sensors | Telaire
Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.
Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6 mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.
Compact CO2 Module Designed to Integrate Into Existing Controls and Equipment
The Telaire T6613 is a compact CO2 sensor module for use in HVAC applications, offering patented ABC logic technology and a lifetime calibration guarantee. It is designed to meet the volume, cost, and delivery expectations of Original Equipment Manufacturers (OEMs).
Features
By Amphenol Advanced Sensors | Telaire
The Telaire T3000 Series is a range of sensors designed to meet the specific needs of customers who require measuring Carbon Dioxide in harsh or difficult environments. Based on a series of modules the casing offers a number of combinations to meet the needs of range, supply voltage, and output type in a range of applications. Example applications include incubators, buses, refrigerators, subway stations, and railway carriages.
Features
By Amphenol Advanced Sensors | Telaire
Features and Benefits
1. Transmission rate 6 Gbps.
2. Meet SATA 3.0 specification.
Mechanical Performance
1. Mating Force and Unmating Force
Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.
Mating Force: 45 N max.
Unmating force: 10N Min.
2. Durability:
Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.
No physical damage and shall meet requirements of subsequent test.
Electrical Performance
1. Contact Resistance
Condition: EIA 364-23. Subject mated contacts assembled in housing to 20mV max Open circuit at 100mA maximum.
30 mohm max, initial per contact mated pair. 15 mohm maxi, after stress per contact mated pair.
Features and Benefits
1. Transmission rate 6 Gbps.
2. Meet SATA 3.0 specification.
Mechanical Performance
1. Mating Force and Unmating Force
Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.
Mating Force: 45 N max.
Unmating force: 10N Min.
2. Durability:
Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.
No physical damage and shall meet requirements of subsequent test.
Electrical Performance
1. Contact Resistance
Condition: EIA 364-23. Subject mated contacts assembled in housing to 20mV max Open circuit at 100mA maximum.
30 mohm max, initial per contact mated pair. 15 mohm maxi, after stress per contact mated pair.
2. Dielectric Withstanding Voltage
Condition: EIA 364-20. Method B. Test between adjacent of mated and unmated connector assemblies. The dielectric shall withstand 500 VAC for 1 minute at sea level.
No flashover, no spark over, no excess leakage and no breakdown.
3. Insulation Resistance
Condition: EIA 364-21. Method C. Measure the insulation resistance between the adjacent contacts of mated and unmated connector assemblies.
The IR shall be 1000 Mohm minimum.
One of our core competences has always been the high experience in manufacturing custom sensors and controls according to customers´ requirements, coping with even the hasher environments´ conditions using rotary, linear and multiturn contact and non-contact technologies.
The pursuit of the most cost-effective total custom-engineered Sensors Solution for your needs is firmly embedded in our business philosophy, whatever your requirements may be, from adapting standard products to complete new designs. Rapid prototyping, low batches accepted, up to 360º measuring range, analog, PWM, SPI, switch outputs are some of the key features offered by Piher. We offer accurate and reliable 360° non-contact angular position sensing.
The Amphenol CXP connectors come in a one-piece press-fit assembly system with twelve channels of up to 20 Gbps, resulting in 240 Gbps of total bandwidth. This allows our CXP to go beyond the 100 Gigabit Ethernet IEEE 802.3b,a and the InfinibandCXP12x QDR standards. The CXP series is the fastest and most dense I/O on the market today. It enables pluggable copper or optical cables to increase the flexibility of system level hardware for end users, and offers reduced cross-talk. The CXP interconnect system offers plug-to-receptacle containment with the various EMI gasket and EMI spring finger options, and is ideal for network switches, routers, servers and storage devices.
The combination of the well-known PT15/PTC15/PS15 control potentiometers with a Detent Control Mechanism (DCM) affords the appliance designer the possibility to solder the potentiometer onto the Control PCB assembly and then, in a second operation, assemble the DCM over it. This removes the need to build Detents into the User front panel of the appliance, simplifying, and significantly reducing the total cost of the solution.
The detent torque can be modified according to Customer requirements (depending on the input dial’s diameter, etc) as can the number and position of the detents.
Features
Self extinguishable plastic UL 94V-0
Wiper positioned at 50% or fully clockwise
Special Tapers
Crimped terminals
Fully customiseable detented potentiometer that features:
Main features
Endless Rotation (360º)
Wide Electrical Angle (340º ± 10º)
Extended Mechanical Life (25.000 cycles)
Laser trimming upon request
Resistance values*: 10k (potentiometer version)
Standard detents number*: 4, 2
Detent torque*: 900 to 1500 gf.cm
Tolerance: ± 30%
Nominal Power: 0.15 W @ 50ºC
Linearity (absolute): ± 5% (standard)
Taper: Linear (potentiometer version)
Life*: 25,000 cycles
Temperature Range: -40ºC to +120ºC
Mechanical Angle: 360º
Electrical Angle: 280º ± 10º
Rotational Torque: ≤ 50 mN.m
Max. Voltage: 38 VDC
SPECIALLY DESIGNED SOCKETS FOR LOW PROFILE SYSTEM
DDR4 Ultra Low Profile (ULP) vertical DIMM sockets provide 288 contacts on 0.85mm pitch and facilitate convenient memory expansion in servers, workstations, desktop PCs, and embedded applications in communications and industrial equipment.
Ultra low module seating height of 1.1mm
Lowest connector height of 13.1mm
Reduced overall profile of the connector
Compatible with standard DIMM module to help optimize airflow
Low resistance contacts (registered DIMM) reduces power consumption in hardware
Features and Benefits
1.Higher performance than dual link DVI, total data rate 10.8Gbps
2.Available audio and video for multi-function monitors
3.Embedded clock
4.Connector enables support for DVI and HDMI via simple adapter
5. Enables new “Direct Drive” monitor category
6. Enable greater integration on both sides of the interface to reduce the cost of digital displays
7. Provide scalable performance in terms of resolution, color depth, and refresh rate over fewer wires to support emerging display needs, such as scalable lanes (1-4) for direct drive LCD panel integration
8. Auxiliary channel(1Mbps) enables new user features,for example as transfer channel of voice chatter, VoIP, game control and camera video
9. Available content protection supports high definition movie viewing
10. Enable a common interface approach across both internal and external display connections
11. Enable an extensible, open industry standard without IP (intellectual property) barriers
12. Offer max 3m cable at high bit rate 2.7GHz and max 15m cable at low bit rate 1.62GHz
Mechanical Performance
Mating Force and Unmating Force
Condition: EIA 364-13. Insert and extract at a speed of 25mm/minute.
Requirement:
Mating Force: 44.1 N maximum.
Unmating Force(no latches): 9.8N(1.0kg) min,39.2N(4.0kg) max
Compact CO2 Module Designed to Integrate Into Existing Controls and Equipment
The Telaire T6615 dual-channel CO2 sensor module is designed to meet the volume, cost, and delivery expectations of Original Equipment Manufacturers (OEMs). The T6615 is a dual channel sensor. The two channels can be described as a CO2 channel that measures gas concentration and a reference channel that measures the sensor signal intensity.
Features
By Amphenol Advanced Sensors | Telaire
The extended temperature range (-40ºC to +120ºC) allows this encoder to be employed in extreme environmental applications where other encoders currently on the market can not be used. This in combination with optional SMD or through-hole mounting makes the E-15 series ideal for automotive heating, ventilation & air conditioning, oven & microwave (white and brown goods in general), kitchen appliance and power tools.
Main features
The eQSFP interconnect system is comprised of a 38 position 0.8 mm pitch SMT connector, and a press-fit cage. With four channels of data in one pluggable, the system interface is capable of transferring data up to 28 Gbps / Channel, and replacing up to 4 standard SFP+ receptacles. These features result in greater port density and overall cost savings over traditional SFP+ products. Supporting standards include, Gigabit Ethernet, InfiniBand, and SONET/SDH with different data rate options. eQSFP includes cages in single and ganged configurations with multiple heat sink options supporting various thermal requirements and port status with light pipes options.
Features and Benefits
1. Transmission rate 6 Gbps.
2. Meet SATA 3.0 specification.
Mechanical Performance
1. Mating Force and Unmating Force
Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.
Mating Force: 40 N max.
Unmating force: 10N Min.
2. Durability:
Condition: EIA 364-09. Mated and Unmated connector for 2500cycles at a rate of 500 cycles per hour.
No physical damage and shall meet requirements of subsequent test.