Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
0.80mm Board-To-Board 100Ω - G832MC Series Connector

0.80MM PITCH, 100Ω BOARD-TO-BOARD SOLUTION
Amphenol high speed board-to-board connectors provide high contact force reliability ensuring strong connectivity, forced insertions, and removals.

Broad range of stacking heights and pin counts are offered to provide maximum design flexibility.

Amphenol 0.80mm pitch connector design is suitable for high performance applications.

  • Superior signal integrity (SI) performance
  • High contact force ensures mating reliability
  • Polarization key at pin edge to prevent misalignment
  • All stack heights meet SAS 3.0, 12GT/s
  • Gold flash plating protects against corrosion
1.00mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.

1.20mm Wire To Board Connector

Amphenol ICC's new 1.2mm pitch wire to board connectors are low profile (mated height of 2.50mm) and compact with pin count availability for 3, 4 and 6 pin counts. The plug and receptacle uses a frictional mating method to provide the retaining function to enable up to 20 mating cycles.

The low profile and compact design of the connector gives its advantage in applications where space is tight and the enclosed receptacle profile make sure that the side entry matings are easy in tight spaces. The additional polarized key slots prevent any misalignment issues between the plug and receptacle.

1.25mm Wire To Board Connector

Amphenol ICC's 1.25mm pitch wire-to-board connector series is designed for a wide variety of applications in Industrial, Automotive and Consumer markets.

The range consists of terminals, crimp housings and PCB headers in straight and right angle, surface mount and through mount configurations. It is a single row design, available with from 2 to 15 circuits. A crimping application tool is also available for wire harness assembly.

Unlike many other products for the same applications, Amphenol ICC's 1.25mm Wire-To-Board range conforms to the EU Industry Safety Standard, PCB header material meets halogen free requirements and the products can be operated in the temperature range from -40°C to +105°C.

12G & 6G SAS Connectors

The 29-position, SAS receptacle and plug connectors enable the implementation of the high-speed, Serial Attached SCSI (SAS) hard disk drive (HDD) interface that is replacing the SCSI drive connection in enterprise storage applications in servers and storage systems. This range conforms to SFF8482, SFF8680 and is capable of meeting up to 12Gb/s.

The SAS connector system is designed to support hot plugging and blind mating of HDDs. Staggered contact lengths provide sequential mating of contacts to enable hot plugging. Molded guide posts provide angled lead-in to compensate for connector misalignment, allowing the device plug and the receptacle to self-align during the mating process. Most connectors also feature stamped retention clips that provide additional mechanical strength for robust PCB attachment.

Amphenol ICC also offers wide-base housing options on vertical backplane receptacles for even more stability.

The high-speed, serial interface is designed to support differential signaling, initially at speeds of 3Gb/s and evolving to 12Gb/s. A SAS receptacle accepts either SAS or SATA (Serial ATA) drives, giving the system manufacturer the option to plug either drive to a backplane. Because both technologies have similiar electrical interfaces, users have the choice of deploying cost-effective SATA drives for bulk storage or higher-performance SAS drives for mission-critical applications.

Amphenol ICC offers a wide range of SAS plug and receptacle connectors for enterprise applications. Vertical and right angle connector configurations provide options for use in servers, server or storage blades, storage backplanes, HDD carriers and HDDs.

AirMax VS2®

AirMax VS2® connectors provide a migration path from AirMax VS® for speeds up to 20Gb/s, providing margin of safety for typical 802.3ap system performance with the flexibility of an open pin field design. The connectors leverage AirMax VS® and VSe® design features and technology to achieve improved signal integrity and mechanical attributes compared to AirMax VS® connectors.

The connector utilizes Amphenol ICC technology for a shieldless design with no metallic plates and closely coupled differential pair design to yield low loss and low crosstalk.

AirMax VS2® connectors are mating-compatible to both AirMax VS® and AirMax VSe® connectors and require no changes to connector PCB footprints. The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new and upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards, or blades that are already in the field as well as new or future higher-speed module cards.

Right angle and vertical receptacles and headers support backplane, midplane and coplanar applications.

AirMax VSe®

Next-generation AirMax VSe® connectors provide a migration path for up to 25Gb/s per differential pair with the flexibility of an open pin field design. The connectors also feature backwards mating-compatible interfaces to existing AirMax VS® connectors with minimal changes to connector footprints.

The connectors combine Amphenol ICC technologies for a shieldless design with no metallic plates and closely edge-coupled differential pairs with innovative design improvements to yield low loss and low crosstalk.

Right angle receptacles and right angle headers will support backplane, midplane or coplanar applications.

The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new or upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards or blades that are already in the field as well as new or future higher-speed module cards.

AirMax VS®

The AirMax VS® connectors use innovative edge-coupling and air dielectric between adjacent conductors to deliver insertion loss and crosstalk. This technology, invented by Amphenol ICC, enabled low cost, high performance connectors that are a leading backplane interconnect solution for telecom, networking, server, and storage applications.

The shieldless Open Pin Field Design with no pre-assigned ground pins provides the ultimate flexibility in board layout. The AirMax VS® connectors addresse a broad range of system architectures, including backplane, midplane, coplanar, midplane orthogonal, cabled backplane, and mezzanine applications.

This is a broad, high volume product family that system continues to earn business when competing with the many more expensive and complex shielded connector systems. This is due in part because of its high density, simple modular construction and low cost.

Further enhancements of the AirMax® product family are seeing speeds increase up to 25Gb/s, enabling customers to design electronic systems that are highly functional and cost effective. This enables backward compatibility with legacy systems and forward compatibility with the most advanced designs.

Amphe-GTR

The Amphe-GTR series of composite reverse bayonet connectors can handle high voltage and are the premier power connector used in the high end server market. RADSOK® socket technology enables the user to achieve increased amperage ratings of 120A and a Dielectric Withstanding Voltage of 2000VAC (RMS).

Amphe-Power

The Amphe-Power® Series consists of three of the time-tested and reliable families of Amphenol Industrial Connectors, all of which are MIL-5015 styles, medium to heavy duty cylindricals. This series, enhanced with RADSOK® sockets, can now handle up to 50% higher amperages. Current Amphe-Power® product lines support from 50A to 1000A continuous duty.

APB300 PowerBlade Connector

300A SINGLE POLE /150A DUAL POLE    (P/N 612040001)

The APB300 dual pole, feed-through socket design delivers 300A current capability and is hot pluggable. The dual pole contact design allows both contacts to be used together or individually. The connector is mounted using the 4 holes located at the bottom.

  • Single or Dual Pole
  • 150A at 48V (Dual)
  • 300A at 48V (Single)
  • UL
  • Full production
  • Can be mounted on either a busbar or a PCB
  • Represents a cost reduction over the TE Connectivity product and lead time improvement
APB500 PowerBlade Connector

500A SINGLE POLE  (P/N 622440002)

The APB500 connector accommodates a 0.125” thick plated busbar for a separable connection and supports blind mating. The guide plate permits a slightly misaligned busbar to connect and provides over stress protection for the contact.

  • Single Pole
  • 500 A at 54V
  • UL
  • Full production
  • Can be mounted on either a busbar or a PCB
  • Represents a major cost reduction over the TE Connectivity product and lead time improvement
BarGuide® Connectors

BarGuide® connectors provides a high current power interconnection with quick connect/disconnect function for space constrained board-to-board, board-to-busbar, and busbar-to-busbar power distribution applications.

Large surface contact area ensures small voltage loss, minimum heat generation and low insertion/ extraction forces

Current carrying capacity from 65Amps to 140Amps

Press-fit tails for mounting on both circuit boards and busbars

Vertical design for parallel/mezzanine applications

BarKlip® BK150 Connector

LOW RESISTANCE BUSBAR CONNECTOR

The BarKlip® BK150 connector features 10 independent conducting beams that maintain contact with the mating busbar in common misaligned positions, therefore lowering resistance connectors.

Up to 170A at 30°C temperature rise in still air

10 independent points of contact for low resistance and high reliability

Optional grounding shield on the board connector

Stainless steel helper spring ensures proper mating force and contact resistance

AGT® plated contacts deliver lower resistance without the high cost of gold

BarKlip® BK300 Connector

LOW RESISTANCE BUSBAR CONNECTOR

The BarKlip® BK300 connector features 14 independent conducting beams that maintain contact with the mating busbar in common misaligned positions, therefore lowering resistance.

  • Up to 350A at 30°C temperature rise in still air
  • 14 independent points of contact for low resistance and high reliability
  • AGT® plated contacts deliver lower resistance without the high cost of gold
BergStak HS™ 0.50mm Mezzanine Connector - Basics

FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS

BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.

The BergStak HS™ series meets the new 25Gb/s performance requirement.

  • Available in 50 positions
  • Available in 12mm stack height
  • 5 and 8mm stack heights, and up to 120 pin configurations available upon request
BergStak+™ 0.80mm Mezzanine Connector

BOARD-TO-BOARD SOLUTION FOR HIGH SPEED AND HIGH DENSITY APPLICATIONS

BergStak+™ 0.80mm is designed to be the next generation PCIe 4.0 compliant mezzanine connector system. It is fully compatible with the existing BergStak® 0.80mm product recommended by the Open Compute Project (OCP).

Backward mateable and footprint compatible with existing BergStak® 0.80mm

Available in 80 and 120 positions. Other position

Available in 5, 8, 12 and 16mm stack heights

Bergstak® 0.50mm Mezzanine Connector

The BergStak® product range is expanded to include 0.5mm mezzanine connectors.

Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments.

Designed with scoop-proof housing, the terminals are protected from damage when parts are mated.

BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector.

BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.

Bergstak® 0.80mm Pitch Connector

FLEXIBLE SOLUTION FOR HIGH DENSITY APPLICATIONS

Amphenol ICC's BergStak® 0.8mm is a flexible solution designed for high speed and high density, parallel board-to-board connector system with 16 PCB stack heights in 9 sizes up to 200 positions.

Housing and terminal profile guarantees support of up to 12Gb/s

Vertical versus vertical mating configuration

40 to 200 position sizes in 20 position increments

5mm to 20mm stack heights in 1mm increments

Boltrack™ Connector

HIGH PERFORMANCE I/O FOR PoE & INDUSTRIAL
Boltrack™ connector is a robust and reliable interconnect solution. It features high power and signal performance, small form factor, field termination, EMI shielding, lightning protection and resistivity to over voltages. Boltrack™ connector comes in 4 pair right angle board and plug mating combination.

  • High power delivery capability
  • Superior signal integrity and resistivity to surge voltage
  • LED, press-fit and pin-in-paste options for board connector
  • Small form factor with 4 additional pins option
  • Plug with dual beam contacts and 4 point IDC

In an era of hyper connectivity, Internet of Things (IoT) calls for more Power over Ethernet (PoE) enabled devices on the network. Besides this, PoE market continues to expand as increased power levels support broader range of powered devices. There is a growing demand for higher power delivery of 100 Watts plus over the four pair ecosystem. At the same time, prolific data growth demands connectors with good signal integrity performance. Boltrack™ connector enables best in class power and signal performance.

Aluminum Busbar - Power Distribution

Custom designed power conductor made from aluminum to reduce weight and cost 

Benefits

  • Approximately a 20% cost reduction relative to copper
    • Cost stability
  • Approximately 50% lighter than copper (includes the extra volume)

Features

  • Variety of plating options available
  • Can be designed to replace a copper busbar considering thermal & physical properties
  • Powder coating for safety
  • Single or multi-layer laminated 
Copper Busbar - Power Distribution

Custom designed power conductor made from copper 

Benefits

  • Space saving relative to aluminum  
  • Efficient thermal and electrical properties
  • Lower Insulation Resistance (IR) drop

Features

  • Industry standard material (commonly used/accepted)
  • Versatile connection and configuration options
  • Variety of plating options available
  • Powder coating for safety
  • Single or multi-layer laminated
CFP4

Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6 mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.

Clincher™ Flex Connectors

The Clincher™ 2.54mm pitch connector family includes single-row pin and receptacle connectors designed for termination to flat flexible circuitry. Amphenol ICC's proven Clincher design has become the standard by which other products are judged. The addition of keying and active latching options to the receptacle offering make Clincher products the smart choice for even more applications. All receptacle connectors use the same customer-preferred and patented Clincher contact and are ideal for applications where shock or vibration are concerns.

Combo SATA RA to SATA 7P+Power

 

Features and Benefits

     1. Transmission rate 6 Gbps.

     2. Meet SATA 3.0 specification.

Mechanical Performance

     1. Mating Force and Unmating Force

         Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.

         Mating Force: 45 N max.

          Unmating force: 10N Min.

     2. Durability:Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.

         No physical damage and shall meet requirements of subsequent test.

 

Combo SATA STR to SATA 7P+Power

 

Features and Benefits

      1. Transmission rate 6 Gbps.

      2. Meet SATA 3.0 specification.

Mechanical Performance

      1. Mating Force and Unmating Force

          Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.

          Mating Force: 45 N max.

          Unmating force: 10N Min.

      2. Durability: Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.

          No physical damage and shall meet requirements of subsequent test.

 

Combo SATA STR to SATA 7P+Power

 

Features and Benefits

       1. Transmission rate 6 Gbps.

       2. Meet SATA 3.0 specification

Mechanical Performance

       1. Mating Force and Unmating Force

           Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.

           Mating Force: 45 N max.

           Unmating force: 10N Min.

       2. Durability:

           Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.

           No physical damage and shall meet requirements of subsequent test.

Electrical Performance

       1. Contact Resistance

           Condition: EIA 364-23. Subject mated contacts assembled in housing to 20mV max Open circuit at 100mA maximum.

           30 mohm max, initial per contact mated pair. 15 mohm maxi, after stress per contact mated pair.

       2. Dielectric Withstanding Voltage

           Condition: EIA 364-20. Method B. Test between adjacent of mated and unmated connector assemblies. The dielectric shall withstand 500 VAC for 1 minute at sea level.

            No flashover, no spark over, no excess leakage and no breakdown.

 

Compression Connectors

Compression connector is a single piece connector used together with flexible circuit or PCB

Cool Edge 0.80mm Connectors

HYBRID CONNECTOR FOR VERSATILE BOARD-TO-BOARD (BTB) APPLICATIONS
Cool Edge Hybrid Power and Signal connectors bring high speed and high power into a one-piece card-edge package. These versatile solutions address multiple standards like PCIe, SAS/SATA, networking and offer multiple BTB configurations such as mezzanine, coplanar and midplane/backplane. Moreover, the connectors are designed as Open Pin Field and are hot plug capable.

  • Modular tooling allows multiple power-signal combinations for vertical configuration
  • Right angle and straddle mount options are available upon request
  • Comes with Cable-to-Board option
  • High Speed 0 ‐ 32Gb/s (or 56Gb/s PAM4) capability
  • Supports multiple impedance systems
Cool Edge 1.00mm PCIe Connectors

HIGH SPEED SPACE-SAVING CONNECTOR FOR BOARD-TO-BOARD (BTB) APPLICATIONS
Cool Edge Signal connectors bring high speed PCIe support into a one-piece card edge package with 16Gb/s Gen4 and 32Gb/s Gen 5 capabilities. Slim connector design saves space on the motherboard while facilitating other higher density applications. Housing design is kept simple with an overall reduced footprint, providing additional benefits over Standard PCIe solutions.

  • Supports speeds up to 32Gb/s
  • Saves more space than Standard PCIe solution
  • Enhanced signal integrity using conductive plastic design
  • Simple housing design allow vertical AOI inspection