Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.
Thermometrics A-1996 HVAC Duct Temperature Sensor offers OEM solutions for measuring the temperature of air in ventilation ducts. The temperature reading is wired to a control module, where the system compares the temperature reading to a temperature set-point and adjusts outputs accordingly.
By Amphenol Advanced Sensors | Thermometrics
Features:
The Accusolve Diesel Particulate Filter (DPF) Soot Sensor utilizes radio frequency technology to enable accurate measurement of accumulated soot in the DPF, providing real-time soot loading data and real time closed loop control of the DPF regeneration process. Accurate measurement of the soot load allows for the optimization and reduction of regeneration cycles of the DPF. This in turn allows for improved fuel economy and improved filter life for active and passive regeneration systems.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
Accurately and continuously measures soot loading (g/L) within a diesel particulate filter (DPF) and through filter specific algorithms providing a (g/L) reading so the OEM can maintain closed loop control of the DPF regeneration process
System cost reductions available due to reduced DPF size and type of materials used
Allows multiple regeneration strategies
Enables accurate reading of partial regeneration
Factory calibration of the sensor via CAN prior to shipment
The sensor electronics enclosure dimension is 100 mm x 150 mm x 30 mm.
4 sensor configurations available include coaxial cable lengths of 1.0 m, 1.5 m, 2.5 m and 3.0 m.
The Active In Car Temperature Sensor provides in-cabin temperature measurement for vehicles that have an automated temperature control system to improve temperature accuracy, cabin comfort and efficiency of the vehicle's temperature control system.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
The Battery Pack Temperature Sensor is a ring terminal temperature sensor that measures surface temperature. It is important to monitor the temperature on hybrid batteries for overcharging protection, as well as to optimize battery performance.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
The Coolant Temperature Sensor (CTS) monitors the temperature of the coolant that is being pumped around the battery to cool the battery module of EV/PHEVs. If the battery module starts to overheat, the Coolant Temperature Sensor relays a signal to the Battery Management System (BMS). The BMS uses this information to prevent battery packs from any damage and maximize the performance.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
The Cylinder Head Temperature Sensor is designed to take the place of one of the cylinder head bolts on a diesel engine. The sensor’s purpose is to measure the cylinder head temperature and to signal the vehicle’s operator if an engine overheats (that is, if an engine over-temperature is taking place). The engine will be in danger of permanent damage if it continues to run at an elevated temperature.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
EV inverter Bus-bars
Electrical vehicle Battery pack bus-bars
Automotive EV Bus-bars
Thermometrics Evaporator Core Temperature Sensor measures evaporator core temperature in a vehicle's HVAC system so that it doesn’t freeze over, preventing a costly repair. The ultra fast response time aids in the HVAC system efficiency by enabling the evaporator core to operate closer to 0°C without the risk of a freeze over condition.
Features:
By Amphenol Advanced Sensors | Thermometrics, Inc.
Thermometrics Evaporator Temperature Sensor is used to measure evaporator core temperature. An evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and robust thermistor to measure its temperature to prevent the core from freezing. A frozen core could result in costly damage to the evaporator core and diminished HVAC operation, so that the cabin temperature can no longer be controlled.
Features:
By Amphenol Advanced Sensors | Thermometrics, Inc.
Thermometrics Exhaust Gas High Temperature Sensor operates over a temperature range from -40°C to 850°C. It monitors the temperature before and after SCR system in vehicle engines as part of the engine control strategy. It is designed for fast response, optimized for thermal dissipation and suitable for high vibration and corrosive environments.
Features:
By Amphenol Advanced Sensors | Thermometrics, Inc.
Thermometrics Fuel Temperature Sensor (FTS) is designed to measure the temperature of a vehicle's fuel and relay this information to the engine control unit, so that it can optimize the air-to-fuel mix ratio, depending on what the fuel temperature is with respect to the intake air temperature. The sensor enables the vehicle to run at maximum efficiency based on temperature. The more optimized the combustion process is, the less pollutants that are emitted via the exhaust system.
Features:
By Amphenol Advanced Sensors | Thermometrics, Inc.
Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
The CR-1 Harsh Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
The NovaSensor NPR-101 Harsh Media Pressure Sensor is a silicon-based MEMS device using “Backside Absolute Pressure” technology designed for harsh media exposure, which eliminates the direct contact of the sensing circuitry with the applied media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics included.
Features
By Amphenol Advanced Sensors | NovaSensor
The Thermometrics Inline Flow-Through Temperature Sensors monitor the temperature of a fluid that passes through it. A system control module receives this temperature reading and uses a control loop to control the overall system temperature. This could be engine temperature, heater temperature, industrial supply temperature, etc.
Features
By Amphenol Advanced Sensors | Thermometrics, Inc.
Times Microwave produces sealed, flexible RF and microwave transmission line assemblies optimized for military environments. These cables exhibit an extremely long life in the rigorous environments found in airborne, shipboard and ground based applications. MilTech® cables are hermetically sealed and incorporate intermediate sections compatible with an assortment of connector systems.
The NovaSensor NPR-101 Harsh Media Pressure Sensor is a silicon-based MEMS device using “Backside Absolute Pressure” technology designed for harsh media exposure, which eliminates the direct contact of the sensing circuitry with the applied media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics included.
The Thermometrics Oil Pressure Switch can be used in all vehicles monitors the engine oil flow when the engine starts. It can detect oil pressure and enables the EMS ECU to check for the lack of oil. It can also send an alarm signal to the driver, helping to avoid engine damage due to overheating
Features
By Amphenol Advanced Sensors | Thermometrics, Inc.
Thermometrics Oil Temperature Sensor (OTS) monitors the temperature of the engine oil in a vehicle and displays this measurement to the vehicle’s occupants. If a vehicle operates at too high a temperature, the engine can be in danger of damage. The OTS prevents this by allowing the operator to stop the vehicle and switch off the engine if the temperature of the oil gets too high as a result of an over heated engine.
Features:
By Amphenol Advanced Sensors | Thermometrics, Inc.
PhaseTrack® cable assemblies are designed for applications demanding minimal phase change over temperature. All PhaseTrack cables use proprietary TF4® dielectric that does not have the abrupt shift in the phase that occurs with solid or tape wrapped PTFE based products under normal room ambient temperature conditions. PhaseTrack cable has the same triple shield construction used in Times popular SF®, SFT®, SilverLine® and MT cables.
The NovaSensor P1602 Pressure Sensor Die is a piezoresistive pressure sensor offered in a miniature die. When excited with 1 mA constant current, the P1602 produces a millivolt output that is proportional to input pressure. The P1602 is available as an absolute pressure sensor, where the applied pressure is referenced to an internal vauum sealed within the die. With NovaSensor SenStable®, the P1602 will provide very low long-term stability erros and excellent repeatability.
Features
By Amphenol Advanced Sensors | NovaSensor
The PST-360 through / hollow shaft position sensor combines three critical design features; 1) through hole where the shaft passes through the sensor, 2) high accuracy absolute position feedback over up to 360°, and 3) a true non-contacting sensing element. Piher’s design does not rely on gears or other rotating parts.
This innovative and unique patented design, features the following advantages:
- Compliments the attributes of the target application.
- Mechanical integrity that matches customer´s application by design.
- Unique shaft mounted design that mounts at the pivot point of the application.
- No levers, connecting rods or mechanical interfaces needed.
- Adapts to shaft´s eccentricity, mounting tolerances and mechanical wear over the life of the application.
Solar Energy Inverter Bus-bar
Solar Energy Inverter Bus-bar: integrates with an IGBT module
Thermometrics NTC Type Surface Mount Devices (SMD) are intended for temperature measurement, control and compensation. They are suitable for standard soldering techniques and availabe in a range of sizes, including 0402, 0603, 0805 and 1206.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
Thermometrics Transmission Fluid Temperature Sensor (TFT) measures the temperature of transmission fluid. It provides input to the control module to modify shift patterns for smoother shifting in automatic transmissions, and also provides over-temperature protection by locking the torque convertor.
Features:
By Amphenol Advanced Sensors | Thermometrics, Inc.
UPC (Universal Power Connector) is a plastic power connector series especially designed to be used in the hybrid electric vehicle market. The 2-pole and 3-pole connectors incorporate the patented RADSOK® technology for higher amperage, lower T-rise and voltage drop, and less resistance. RADSOK’S® twisted grid configuration allows for 50% more current to pass through the same size pin, while providing increased reliability and cycle durability, as well as lower mating forces.
The compact, plastic shell structure is light weight with a small footprint, has continuous power up to 400 A, and is field installable and repairable. These attributes make UPC robust and the interconnect of choice for the EV and Hybrid markets.
For Oil Pressure Applications
One of the smallest i2s-pressure sensors, the VSP has a robust and submersible design which makes it a reliable partner for any oil pressure application in motor and commercial vehicles. The VSP is able to measure relative pressure in a nominal pressure range of up to 250 bar. The specially developed evaluation electronics make it possible to take very precise and stable measurements at temperatures of up to 150 °C, even under tough conditions. In addition, the VSP also complies with the high ESD and EMC standards applicable in the automobile industry. Our assembly machines have a wide range of flexible settings enabling a customised production of the sensor and an optimal adaption to the respective application.
Key Features
Specially developed measurement element and evaluation electronics
Robust, minimised design
Wide variety of electrical connections and output signals available
Data Sheet
Thermometrics Water Temperature Sensor (WTS) monitors the temperature of the coolant that is being pumped around the engine block to cool the engine to notify the driver of the vehicle if the engine starts to overheat. The goal is to relay an over-temperature engine temperature to the driver, so that the vehicle can be stopped and the engine switched off before the heat causes any permanent damage to the engine.
By Amphenol Advanced Sensors | Thermometrics, Inc.
Features:
Targeted for Powertrain and other Critical applications, the Z-15 has been specifically designed to be integrated within the existing final application (throttle body, air-intake valve…) to avoid the duplication of costs associated with the standard “bolt-on” alternatives that prevail in the marketplace.
Moreover, because of the cost effectiveness of the Z-15 solution, TRUE redundancy can be achieved employing two or more ganged Z-15’s.
Main features: