Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
GB AC Charge Inlets

Amphenol provides customers GB Charge Plug&Inlet Series solutions, Charge Coupler Connector with Cable is available for integration into Electric Vehicle Supply Equipment (EVSE) for Electric Vehicles and Hybrid Electric Vehicles.

The Charge Coupler Connector with Cable meet national standard GB/T 20234.1/2/3-2015

0.21mm HFMK Series (Non-ZIF FPC)

LOW PROFILE AND COMPACT

HFMK Series FPC is a 0.21mm pitch Non-ZIF FPC that is lowest in height suitable for applications where space is a constraint.

  • Low profile and compact
  • FPC locking arm
  • Single action Push-pull FPC termination
0.30mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. 

Amphenol ICC offers a full range of 0.3mm pitch connectors for applications where board space is at premium. Amphenol ICC’s 0.3mm pitch connectors are available in 13 to 51 positions. 

0.40mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.  As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  The SFGL series 0.4mm pitch connector offers a high pin count with a small footprint and includes such innovative

0.50mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  Amphenol ICC has one of the broadest ranges of 0.5mm flex circuit connectors in the industry. 

1.00mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.

1.20mm Wire To Board Connector

Amphenol ICC's new 1.2mm pitch wire to board connectors are low profile (mated height of 2.50mm) and compact with pin count availability for 3, 4 and 6 pin counts. The plug and receptacle uses a frictional mating method to provide the retaining function to enable up to 20 mating cycles.

The low profile and compact design of the connector gives its advantage in applications where space is tight and the enclosed receptacle profile make sure that the side entry matings are easy in tight spaces. The additional polarized key slots prevent any misalignment issues between the plug and receptacle.

1.25mm Wire To Board Connector

Amphenol ICC's 1.25mm pitch wire-to-board connector series is designed for a wide variety of applications in Industrial, Automotive and Consumer markets.

The range consists of terminals, crimp housings and PCB headers in straight and right angle, surface mount and through mount configurations. It is a single row design, available with from 2 to 15 circuits. A crimping application tool is also available for wire harness assembly.

Unlike many other products for the same applications, Amphenol ICC's 1.25mm Wire-To-Board range conforms to the EU Industry Safety Standard, PCB header material meets halogen free requirements and the products can be operated in the temperature range from -40°C to +105°C.

15mm Position Sensor/ Potentiometer

The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and  multi-purpose Control applications such as:

  • Automotive HVAC, Seat, Rear-view mirror actuator feedback sensors and HVAC Controls.
  • Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers...
  • Timer & Function/Programme Select for Washing  Machines, Dishwashers and all White Goods in general.
  • Size and Position detectors.
     
Standard Features:
  • Conceived and designed for easy customisation.
  • SMD or Through-hole Mount.
  • Endless Rotation (360º).
  • Wide Electrical Angle (340º +/-10º).
  • Extended Mechanical Life (100k cycles).
  • Working Temperature Range: -40ºC to +120ºC.
  • Low Profile.
  • Linearity 3%. 
  • Embossed Tape or Bulk packaging.
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.
     

More information.

2X Power SATA RA to 4P Connector

 

Features and   

      1. Meet SATA 3.0 specification

Mechanical Performance

      1. Mating Force and Unmating Force

          Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.

          Mating Force: 45 N max

          Unmating Force: 15 N min for cycles 1 through 5. 10N min after 50 mating/unmating (at rate of 200cycles per hour) cycles.

      2. Durability:Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.

          No physical damage and shall meet requirements of subsequent test.

Electrical Performance

       1. Contact Resistance

          Condition: EIA 364-23. Subject mated contacts assembled in housing to 20mV maximum. Open circuit at 100mA maximum.

          30 mohm max, initial per contact mated pair. 15 mohm max, after stress per contact mated pair.

          The IR shall be 1000 Mohm min.

4X InfiniBand

High Speed Cables. 

A-1996 - HVAC Duct Temperature Sensor | Thermometrics

Thermometrics A-1996 HVAC Duct Temperature Sensor offers OEM solutions for measuring the temperature of air in ventilation ducts. The temperature reading is wired to a control module, where the system compares the temperature reading to a temperature set-point and adjusts outputs accordingly.

By Amphenol Advanced Sensors | Thermometrics

Features:

  • High accuracy OEM sensor
  • High sensitivity & reliability
  • Excelent interchangeability
  • High reliability
  • Twist and lock installation
360º rotary position sensor.

This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.


Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.

Main features
  • Electrical angle: 360º
  • Designed for direct input to microprocessor.
  • SMD, Horizontal or Through-hole Mount
  • Endless Rotation
  • Extended Mechanical Life
  • Working Temperature Range (-40ºC to +120ºC)
  • Low Profile (4.4 mm)
  • Linearity (independent): ±2%
  • Embossed Tape or Bulk packaging
  • Reflow Soldering capability
  • Plug-in shafts
  • Shaft insertable from both sides
  • Polarised "T" rotor (European Home Appliance standard)
  • Ideal for Consumer Control and position sensing applications
  • IP54 protection according to IEC 60529

More information.

ACA-B Series

Amphenol ACA-B connectors are designed for commercial and industrial applications requiring a reverse bayonet style coupling device for high power and/or signal. Similar in design to a MIL-DTL-5015, ACA-B’s are a quick, positive mating type of connector perfect for markets such as factory automation, robotics and process control equipment. Amphenol’s ACA-B series has proven itself valuable in the military ground vehicle and alternative energy markets because of its low cost, high reliability design.

Thermometrics Accusolve Diesel Particulate Filter Soot Sensor DPF

The Accusolve Diesel Particulate Filter (DPF) Soot Sensor utilizes radio frequency technology to enable accurate measurement of accumulated soot in the DPF, providing real-time soot loading data and real time closed loop control of the DPF regeneration process. Accurate measurement of the soot load allows for the optimization and reduction of regeneration cycles of the DPF. This in turn allows for improved fuel economy and improved filter life for active and passive regeneration systems.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • Accurately and continuously measures soot loading (g/L) within a diesel particulate filter (DPF) and through filter specific algorithms providing a (g/L) reading so the OEM can maintain closed loop control of the DPF regeneration process

  • System cost reductions available due to reduced DPF size and type of materials used

  • Allows multiple regeneration strategies

  • Enables accurate reading of partial regeneration

  • Factory calibration of the sensor via CAN prior to shipment

  • The sensor electronics enclosure dimension is 100 mm x 150 mm x 30 mm.

  • 4 sensor configurations available include coaxial cable lengths of 1.0 m, 1.5 m, 2.5 m and 3.0 m.

Thermometrics Active In Car Temperature Sensor (AIT)

The Active In Car Temperature Sensor provides in-cabin temperature measurement for vehicles that have an automated temperature control system to improve temperature accuracy, cabin comfort and efficiency of the vehicle's temperature control system.

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Features:

  • Existing field proven design
  • Fast response
  • Accuracy maximizes driver/passenger comfort
  • Ultra-low noise, high air flow optimised system design
  • Coreless-type motor
  • Small size & flexible packaging facilitates installation & service
  • Low current consumption
  • Long-term stability – even in extreme humidity environments
  • Alternate RvT curves available
  • Available with/without humidity sensor
  • Electronics integrated into one assembly with the temperature sensor
  • Different geometries to meet package requirements

Filec will work with the customer to design and build airbag electrical harnesses designed for specific needs. Based on the customer’s specifications, Filec will source and assembe Airbag connectors with others components such as terminals, housing, clips, tubes, and tape to assure a quality end-product. Customers include PSA and Toyota.

Aribag switch potentiometer.

Airbags have been designed to help protect adults in a moderate to severe frontal collision. To do this, the passenger’s front airbag is quite large, and it can inflate with enough force to cause very serious injuries.
There are conditions where the automatic shut off feature will not completely insure safety (seat too far forward, small child in a car seat), there could be a need to manually disarm the passeger sode airbag.

Even though the vehicle  may include an advanced front airbag system that automatically turns the passenger’s front airbag off, all manufacturers offer a manual cutoff system for an additional measure of safety. These manual systems are typically activated or deactivated by turning them using the vehicle´s  ignition key.

This rotary switch seamlessly adapts to these systems and reliably actuates the transition between the “on” and “off” states. 

More information.

Thermometrics Ambient Air Temperature Sensor

The Ambient Air Temperature Sensor measures the temperature outside the passenger compartment and is usually mounted inside or near the front bumper. The sensor provides input to automatic HVAC systems to help control the interior temperature of the automobile. The sensor also provides the vehicle occupants with temperature readings from outside the car. This information is particularly useful when driving under near freezing or freezing conditions.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Applications:

  • Automatic air conditioner systems
  • All temperature sensors

Features:

  • Low price
  • High sensitivity
  • Wide application
  • Compact design
  • Snap-in design
Amphe-Push Pull Series

Amphenol Industrial’s High Power Amphe-Push-Pull Connector features a single pole 8.0mm  RADSOK contact which provides a high current charge interface capable of 200 amps.  There are five different keyways to choose from to prevent incorrect mating. Key applications can be found in the HV&EV market, if you require wide operating temperatures, high current rating, excellent physical shock & vibration, and EMI shielding.

GB AC Charge Plug

Amphenol provides customers GB Charge Plug&Inlet Series solutions, Charge Coupler Connector with Cable is available for integration into Electric Vehicle Supply Equipment (EVSE) for Electric Vehicles and Hybrid Electric Vehicles.

The Charge Coupler Connector with Cable meet national standard GB/T 20234.1/2/3-2015

Automotive Antenna Solutions

Amphenol’s automotive antennas and RF cable assemblies are integrated into car doors, window glass, and infotainment systems; and assembled onto vehicle roofs. From shark fin antennas to coaxial assemblies, Amphenol can provide solutions for GPS, SDARS, WIFI, Bluetooth, 3G, 4G LTE, and AM/FM. 

Automotive Cable Assemblies for Data Communication - KE Elektronik

Amphenol has the cable assembly solutions you need to Transfer data within a vehicle. Whether it is high-speed data systems, LVDS (low-voltage differential signaling) systems, navigation systems or parking distance control systems we will partner with you to develop the solution you need.

TFC, Automotive Cables

TFC manufactures automotive coaxial cable solutions for infotainment, telematics and safety applications, including AM/FM, satellite radio, GPS/Cell/Wi-Fi, camera systems, and DSRC/V2X systems.  TFC’s coaxial cables are engineered to deliver the electrical & mechanical performance needed for the demanding requirements of the automotive industry. TFC has a global manufacturing footprint to support your business with local manufacturing/content and a streamlined supply chain.

New Product

Connector cable for connecting battery negative side with car body

Battery Pack Temperature Sensor

Thermometrics Battery Pack Temperature Sensor is a ring terminal temperature sensor that measures surface temperature. It is important to monitor the temperature on hybrid batteries for overcharging protection, as well as to optimize battery performance.

Features:

  • High reliability and stability over battery lifetime
  • Compact thermistor design potted into a ring terminal connector
  • Very high insulation resistance
  • Low-mass thermistor with PTFE-coated nickel wires for fast time response and accuracy
  • Alternate RvT curves available
  • Standard and custom ring terminal sizes are available

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Thermometrics Battery Pack Temperature Sensor

The Battery Pack Temperature Sensor is a ring terminal temperature sensor that measures surface temperature. It is important to monitor the temperature on hybrid batteries for overcharging protection, as well as to optimize battery performance.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High reliability and stability over battery lifetime
  • Compact thermistor design potted into a ring terminal connector
  • Very high insulation resistance
  • Low-mass thermistor with PTFE-coated nickel wires for fast time response and accuracy
  • Alternate RvT curves available
  • Standard and custom ring terminal sizes are available
BergStak HS™ 0.50mm Mezzanine Connector - Basics

FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS

BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.

The BergStak HS™ series meets the new 25Gb/s performance requirement.

  • Available in 50 positions
  • Available in 12mm stack height
  • 5 and 8mm stack heights, and up to 120 pin configurations available upon request
BergStak+™ 0.80mm Mezzanine Connector

BOARD-TO-BOARD SOLUTION FOR HIGH SPEED AND HIGH DENSITY APPLICATIONS

BergStak+™ 0.80mm is designed to be the next generation PCIe 4.0 compliant mezzanine connector system. It is fully compatible with the existing BergStak® 0.80mm product recommended by the Open Compute Project (OCP).

Backward mateable and footprint compatible with existing BergStak® 0.80mm

Available in 80 and 120 positions. Other position

Available in 5, 8, 12 and 16mm stack heights

BergStak® 0.40mm Floating Board-to-Board Connector

3-AXIS FLOATING FEATURE, SHIELDED DESIGN
BergStak® 0.40mm is a floating type Board-to-Board (BTB) connector with 32 pin count and stack height of 5mm. This solution comes with an all-round shield for superior EMI performance. Its unique connector design has a floating range of ±0.40mm in the X, Y and Z directions. BergStak® 0.40 ideal for automotive applications, especially cameras mounted on vehicles.

  • Fine pitch design at 0.40mm
  • Supports speed performance up to 3Gb/s
  • Floating range of ±0.40mm in the X, Y and Z directions
  • Shielded design for superior EMI performance
  • Polarized key for Poke-Yoke mating