Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
0.21mm HFMK Series (Non-ZIF FPC)

LOW PROFILE AND COMPACT

HFMK Series FPC is a 0.21mm pitch Non-ZIF FPC that is lowest in height suitable for applications where space is a constraint.

  • Low profile and compact
  • FPC locking arm
  • Single action Push-pull FPC termination
0.30mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. 

Amphenol ICC offers a full range of 0.3mm pitch connectors for applications where board space is at premium. Amphenol ICC’s 0.3mm pitch connectors are available in 13 to 51 positions. 

0.40mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.  As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  The SFGL series 0.4mm pitch connector offers a high pin count with a small footprint and includes such innovative

0.50mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  Amphenol ICC has one of the broadest ranges of 0.5mm flex circuit connectors in the industry. 

0.80mm Board-To-Board 100Ω - G832MC Series Connector

0.80MM PITCH, 100Ω BOARD-TO-BOARD SOLUTION
Amphenol high speed board-to-board connectors provide high contact force reliability ensuring strong connectivity, forced insertions, and removals.

Broad range of stacking heights and pin counts are offered to provide maximum design flexibility.

Amphenol 0.80mm pitch connector design is suitable for high performance applications.

  • Superior signal integrity (SI) performance
  • High contact force ensures mating reliability
  • Polarization key at pin edge to prevent misalignment
  • All stack heights meet SAS 3.0, 12GT/s
  • Gold flash plating protects against corrosion
1.00mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.

SMPTE 304, 110 Series Broadcast Connectors

Amphenol Fiber Systems International's line of 110 Series connectors conform to the SMPTE 304M Standard. These hybrid connectors are designed for use with high
definition broadcast television cameras used worldwide for the production and transmission of high definition TV programming.  

The 110 Series Connectors feature two fiber optic termini and four electrical contacts. The fiber termini support either single mode and multimode fibers, while the two auxiliary electrical contacts permit supply of power remotely to the camera at long distances from the studio, control van or CCU. Two additional low voltage electrical contacts are provided for communication purposes. The connectors are designed to be used in conjunction with SMPTE 311M Standard cables.

The connectors are fabricated from stainless steel to withstand corrosive elements when exposed to the extreme harsh outdoor environments, and are sealed to an IP68 rating to block out ingress of damaging dirt, dust and moisture. The robust shells are designed with thick walls to prevent damage from rough handling during outdoor deployment at venues such as professional sports arenas. Dust caps are available to protect against contamination of the interfaces. The connectors are designed for easy termination in the field.

While intended primarily for use for HDTV broadcast applications, these connectors are ideal for other applications that call for rugged hybrid fiber optic connections. Optional materials, finishes, inserts and keying configurations are available as custom configurations. The connectors are also offered with optional custom cable attachments allowing use with other cable structures.

Features & Benefits:

  • SMPTE 304M Compliant
  • Hybrid (2-ch SM fiber + 2HV + 2LV)
  • Push Pull quick connect/disconnect mechanism for easy/quick mating
  • Multiple key design for easy blind mating
  • Low insertion loss
  • High back reflection with super PC polish
  • Plug and socket configuration for easy daisy chaining
  • Designed for excellent optical performance over the harshest environmental conditions
  • 360 degree shielding for full EMI screening
  • Plug shell has color code band
  • Designed for easy field termination

Applications

  • HDTV broadcast cameras
  • Studios
  • Outside broadcast vehicles
  • Sports arenas
  • Auditoria
AirMax VS2®

AirMax VS2® connectors provide a migration path from AirMax VS® for speeds up to 20Gb/s, providing margin of safety for typical 802.3ap system performance with the flexibility of an open pin field design. The connectors leverage AirMax VS® and VSe® design features and technology to achieve improved signal integrity and mechanical attributes compared to AirMax VS® connectors.

The connector utilizes Amphenol ICC technology for a shieldless design with no metallic plates and closely coupled differential pair design to yield low loss and low crosstalk.

AirMax VS2® connectors are mating-compatible to both AirMax VS® and AirMax VSe® connectors and require no changes to connector PCB footprints. The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new and upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards, or blades that are already in the field as well as new or future higher-speed module cards.

Right angle and vertical receptacles and headers support backplane, midplane and coplanar applications.

AirMax VSe®

Next-generation AirMax VSe® connectors provide a migration path for up to 25Gb/s per differential pair with the flexibility of an open pin field design. The connectors also feature backwards mating-compatible interfaces to existing AirMax VS® connectors with minimal changes to connector footprints.

The connectors combine Amphenol ICC technologies for a shieldless design with no metallic plates and closely edge-coupled differential pairs with innovative design improvements to yield low loss and low crosstalk.

Right angle receptacles and right angle headers will support backplane, midplane or coplanar applications.

The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new or upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards or blades that are already in the field as well as new or future higher-speed module cards.

AirMax VS®

The AirMax VS® connectors use innovative edge-coupling and air dielectric between adjacent conductors to deliver insertion loss and crosstalk. This technology, invented by Amphenol ICC, enabled low cost, high performance connectors that are a leading backplane interconnect solution for telecom, networking, server, and storage applications.

The shieldless Open Pin Field Design with no pre-assigned ground pins provides the ultimate flexibility in board layout. The AirMax VS® connectors addresse a broad range of system architectures, including backplane, midplane, coplanar, midplane orthogonal, cabled backplane, and mezzanine applications.

This is a broad, high volume product family that system continues to earn business when competing with the many more expensive and complex shielded connector systems. This is due in part because of its high density, simple modular construction and low cost.

Further enhancements of the AirMax® product family are seeing speeds increase up to 25Gb/s, enabling customers to design electronic systems that are highly functional and cost effective. This enables backward compatibility with legacy systems and forward compatibility with the most advanced designs.

BergStak HS™ 0.50mm Mezzanine Connector - Basics

FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS

BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.

The BergStak HS™ series meets the new 25Gb/s performance requirement.

  • Available in 50 positions
  • Available in 12mm stack height
  • 5 and 8mm stack heights, and up to 120 pin configurations available upon request
BergStak® 0.40mm Floating Board-to-Board Connector

3-AXIS FLOATING FEATURE, SHIELDED DESIGN
BergStak® 0.40mm is a floating type Board-to-Board (BTB) connector with 32 pin count and stack height of 5mm. This solution comes with an all-round shield for superior EMI performance. Its unique connector design has a floating range of ±0.40mm in the X, Y and Z directions. BergStak® 0.40 ideal for automotive applications, especially cameras mounted on vehicles.

  • Fine pitch design at 0.40mm
  • Supports speed performance up to 3Gb/s
  • Floating range of ±0.40mm in the X, Y and Z directions
  • Shielded design for superior EMI performance
  • Polarized key for Poke-Yoke mating
Bergstak® 0.50mm Mezzanine Connector

The BergStak® product range is expanded to include 0.5mm mezzanine connectors.

Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments.

Designed with scoop-proof housing, the terminals are protected from damage when parts are mated.

BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector.

BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.

M16

M16 size with screw locking according to IEC 61076-2-106, Metal locking ring, Shieldable, 2-8, 12 and 14 positions for crimp and solder, up to 10A and 300 V, IP 40, Male and female cable connectors straight and angled, Male and female receptacles for front and rear panel mointing and PCB mounting, UL registred under file number E 63 093 UL

M16

M16 size with Bayonet locking according to IEC 61076-2-106, Plastic Bayonet ring, Shieldable, 2-8, 12 and 14 positions for crimp and solder, up to A10 A and 300 V, IP 40, Male and female cable connectors straight and angled, Male and female receptacles for front and rear panel mounting and PCB mounting, UL registred under file number E 63 093 UL

M16

M16 size with screw locking according IEC 61076-2-106, Metal locking ring, Shieldable, 3-8, 12 and 14 positions for crimp and solder, Up to 10A and 300V, IP 69K / IP 67 / IP 65, Male and female cable connectors and straight and angled, Male and female receptacles for front and rear panel mounting and PCB mounting, UL registred under file number E 63 093 UL, Connectors are compliant with AISG - Standard.

C091D+

* Screw locking according to IEC 61076-2-106* Metal locking ring * 2 - 8, 12 and 14 positions for crimp and solder * IP 68 * Internal strain relief * Male and female cable connectors straight and angled * Male and female receptacles see C091D * UL registered under file number E 63 093 UL * Reduced Assembling Time * Easy and reliable assembly * Outer cable diameter up to 10,5mm * 360° shielding (resistance 30db)

eco|mate C16-L

The C16-3 2 + PE combines the advantages of two contact technologies: screw terminals for quick and easy (field) assembly of the female cable connector as well as economic crimp contacts for the male receptacle, which can be processed automatically. Based on shell size 1 the version with 3 contacts provides an optimized bayonet lock for IP67 in mated position and is also UV-resistant. Because of that the up to 35A and 750V connector is particularly for outside applications e. g. solar.

Clincher™ Flex Connectors

The Clincher™ 2.54mm pitch connector family includes single-row pin and receptacle connectors designed for termination to flat flexible circuitry. Amphenol ICC's proven Clincher design has become the standard by which other products are judged. The addition of keying and active latching options to the receptacle offering make Clincher products the smart choice for even more applications. All receptacle connectors use the same customer-preferred and patented Clincher contact and are ideal for applications where shock or vibration are concerns.

D-Sub

The standard and high density D-Subminiature connectors are available in five shell sizes offering a wide choice of contact positions: 9, 15, 25, 37, and 50 in standard density and 15, 26, 44, 62, 78, and 104 positions in high density. We offer filtered, sealed and compliant tail designs as well as custom crimp type or other terminations

Duflex™ Flex Connectors

Duflex™connectors represent a low cost and reliable solution for terminating FPC/FFC and membrane touch switches. Designed for use on a 2.54mm grid the Duflex connector combines the advantage of the well proven Dubox™ receptacle with the assembly speed of IDC (Insulation Displacement Contact) termination techniques.

Available in single and double row versions with up to 36 contacts per row.

ExaMAX® 56Gb/S High Speed Backplane Connector

SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS

ExaMAX® backplane connector system meets industry specifications requiring higher bandwidth applications from 25Gb/s to 56Gb/s. The optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss while minimizing channel performance variation for every differential pair. Each signal wafer incorporates an innovative one-piece, embossed ground structure to improve crosstalk performance through 56Gb/s. The simple, functional design contributes to a very cost-effective solution.

The innovative beam-on-beam contact interface minimizes residual stub for improved signal integrity performance while providing exceptionally low mating forces

ExaMAX® optimizes design flexibility by integrating high speed differential signals, low speed signals and power in one connector

ExaMAX® product family is offered in industry standard packaging options including traditional backplane, coplanar board, orthogonal midplane and orthogonal direct mate, mezzanine and cable to board

Flexible Printed Circuit Assemblies

Amphenol Sincere is a one stop shop for value added flexible circuits.  We will work with your engineering team from the inception of the design through full turn-key tested circuit assemblies.  Our services include design and gerber creation, DFM reviews, full in-house assembly, and testing of final product.

  • SMT and Manual Assembly
  • Wave Soldering
  •  Circuit Finishing including structural adhesives, epoxies, conformal coating, PSA adhesive, and Poron patches
  • Passive and Active Component Testing
Heavymate A

The connectors are intermateable and interchangeable with all third-party products according standard norm. All inserts can be used in housings high profile as well as low profile housings. Contact insers available with 3- 4- 16- and 20 pins. Rated current 16 A Rated voltage up to 400 V

heavy|mate D

Standardized Connector. Intermateable and interchangeable with all third-party products according standard norms. 7- 8- 15- 25- 40- and 64 pin with crim termination. Rated current 10 A Rated volatage. Special version 24-108 Pins.

heavy|mate E

* Rated voltage 500 V* Rated current 16 A ... 22 A * Termination: screw, crimp, tension spring * Numbers of contacts: 6, 10, 16, 24, 48

heavy|mate F

With the new series heavy|mate® F Amphenol offers a new modular system that is compatible with the market leader. With the series heavy|mate® M Amphenol offers a system with many benefits: * More module slots in the connector. * Large selection of contact-safe male contacts * Stamped contacts and the Radsok contact technology * Great cost savings potential.  Rated current up to 100 A rated voltage up to 1000 V Crimp termination.

heavy|mate H

2 delayed mating contacts, Screw termination, 3-6-10- 16 pins rated current16 A rated voltage up to 660 V Special verion: 6 pin with screw termination, rated current 35 A rated voltage up to 400 V

heavy|mate M

Modular system with up to 7 module slots (1pin - 20 pins per module) in a cost effective plastic housing offering more combination possibilities as the usual market standard. Crimp and Radsok contacts available. Rated current 200 A Rated voltage up to 1000 V. 

heavy|mate Q

The series is characterized by it's compact design and is suitable especially for drives applications. The housings are available in plastic and metal version. Rated current 35 A Rated voltage up to 690 V Crimptermination 5- 4/2- 7-8-12- und 17 pins.