Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
TSW-10 

The TSW-10 module measures the turbidity (amount of suspended particles) of the wash water in washing machines and dishwashers. An optical sensor for washing  machines is a measuring product for a turbid water density or an extraneous matter concentration using the refraction of wavelength between photo transistor and diode. By using an optical transistor and optical diodes, an optical washing machine sensor measures the amount of light coming from the source of the light to the light receiver, in order to calculate water turbidity.

 

Features

The sensor operates on the principle that when light is passed through a sample of water, the amount of light transmitted through the sample is dependent on the amount of soil in the water. As the soil level increases, the amount of transmitted light decreases. The turbidity sensor measures the amount of transmitted light to determine the turbidity of the wash water. These turbidity measurements are supplied to the dishwasher controller, which makes decisions on how long to wash in all the cycles. These decisions are made based on a comparison between clean water measurements (taken at the beginning of the wash cycle) and the wash water turbidity measurement taken at the end of each wash cycle. By measuring the turbidity of the wash water, the dishwasher can conserve energy on lightly soiled loads by only washing as long as necessary. This will result in energy savings for the consumer.

 

By Amphenol Advanced Sensors | Thermometrics, Inc.                 

 

0.21mm HFMK Series (Non-ZIF FPC)

LOW PROFILE AND COMPACT

HFMK Series FPC is a 0.21mm pitch Non-ZIF FPC that is lowest in height suitable for applications where space is a constraint.

  • Low profile and compact
  • FPC locking arm
  • Single action Push-pull FPC termination
0.30mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. 

Amphenol ICC offers a full range of 0.3mm pitch connectors for applications where board space is at premium. Amphenol ICC’s 0.3mm pitch connectors are available in 13 to 51 positions. 

0.40mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.  As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  The SFGL series 0.4mm pitch connector offers a high pin count with a small footprint and includes such innovative

0.50mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  Amphenol ICC has one of the broadest ranges of 0.5mm flex circuit connectors in the industry. 

0.80mm Board-To-Board 100Ω - G832MC Series Connector

0.80MM PITCH, 100Ω BOARD-TO-BOARD SOLUTION
Amphenol high speed board-to-board connectors provide high contact force reliability ensuring strong connectivity, forced insertions, and removals.

Broad range of stacking heights and pin counts are offered to provide maximum design flexibility.

Amphenol 0.80mm pitch connector design is suitable for high performance applications.

  • Superior signal integrity (SI) performance
  • High contact force ensures mating reliability
  • Polarization key at pin edge to prevent misalignment
  • All stack heights meet SAS 3.0, 12GT/s
  • Gold flash plating protects against corrosion
1.00mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.

12X InfiniBand

High Speed Cables

15mm Position Sensor/ Potentiometer

The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and  multi-purpose Control applications such as:

  • Automotive HVAC, Seat, Rear-view mirror actuator feedback sensors and HVAC Controls.
  • Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers...
  • Timer & Function/Programme Select for Washing  Machines, Dishwashers and all White Goods in general.
  • Size and Position detectors.
     
Standard Features:
  • Conceived and designed for easy customisation.
  • SMD or Through-hole Mount.
  • Endless Rotation (360º).
  • Wide Electrical Angle (340º +/-10º).
  • Extended Mechanical Life (100k cycles).
  • Working Temperature Range: -40ºC to +120ºC.
  • Low Profile.
  • Linearity 3%. 
  • Embossed Tape or Bulk packaging.
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.
     

More information.

4X InfiniBand

High Speed Cables. 

360º rotary position sensor.

This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.


Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.

Main features
  • Electrical angle: 360º
  • Designed for direct input to microprocessor.
  • SMD, Horizontal or Through-hole Mount
  • Endless Rotation
  • Extended Mechanical Life
  • Working Temperature Range (-40ºC to +120ºC)
  • Low Profile (4.4 mm)
  • Linearity (independent): ±2%
  • Embossed Tape or Bulk packaging
  • Reflow Soldering capability
  • Plug-in shafts
  • Shaft insertable from both sides
  • Polarised "T" rotor (European Home Appliance standard)
  • Ideal for Consumer Control and position sensing applications
  • IP54 protection according to IEC 60529

More information.

P330 Series of Absolute Pressure Sensor Die

The NovaSensor P330 Series of Absolute Pressure Sensor Die, or piezoresistive pressure die, offers the same superior stability and sensitivity as in larger chips, but in an extremely small footprint for invasive applications where small size is critical. It has excellent measurement accuracy, which is ideal for demanding applications with restricted dimensional profiles such as medical catheters and IC packages. NovaSensor’s proprietary SenStable® process provides excellent long term stability and repeatability.

 

Features

  • Extremely small size: 330 x 180 µm cross section
  • Stable accurate pressure measurement
  • Low power consumption using high impedance
  • Absolute pressure sensing
  • Standard pressure range of 450 to 1050 mmHgA
  • 4500 mmHgA burst pressure
  • Gold wire bond pads

 

By Amphenol Advanced Sensors | NovaSensor 

 

Oxygen sensors

SGX Sensortech offer a range lead based and non-lead based Oxygen gas sensors for the measurement of atmospheric Oxygen levels. The sensors are designed specifically for portable or fixed instrumentation for use within the Mining, Automation and control, Industrial health and safety, Oil and gas and utilities.

 Features:

Electrochemical cells

SGX Sensortech offer a range electrochemical toxic gas sensors designed for the measurement of atmospheric toxic gases, Carbon monoxide, Hydrogen sulphide, Ammonia, Nitrogen Dioxide and many more. The sensors are designed specifically for portable or fixed instrumentation for use within the Mining, Automation and control, Industrial health and safety, Oil and gas and utilities.

 

Features:

AirMax VS2®

AirMax VS2® connectors provide a migration path from AirMax VS® for speeds up to 20Gb/s, providing margin of safety for typical 802.3ap system performance with the flexibility of an open pin field design. The connectors leverage AirMax VS® and VSe® design features and technology to achieve improved signal integrity and mechanical attributes compared to AirMax VS® connectors.

The connector utilizes Amphenol ICC technology for a shieldless design with no metallic plates and closely coupled differential pair design to yield low loss and low crosstalk.

AirMax VS2® connectors are mating-compatible to both AirMax VS® and AirMax VSe® connectors and require no changes to connector PCB footprints. The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new and upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards, or blades that are already in the field as well as new or future higher-speed module cards.

Right angle and vertical receptacles and headers support backplane, midplane and coplanar applications.

AirMax VSe®

Next-generation AirMax VSe® connectors provide a migration path for up to 25Gb/s per differential pair with the flexibility of an open pin field design. The connectors also feature backwards mating-compatible interfaces to existing AirMax VS® connectors with minimal changes to connector footprints.

The connectors combine Amphenol ICC technologies for a shieldless design with no metallic plates and closely edge-coupled differential pairs with innovative design improvements to yield low loss and low crosstalk.

Right angle receptacles and right angle headers will support backplane, midplane or coplanar applications.

The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new or upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards or blades that are already in the field as well as new or future higher-speed module cards.

AirMax VS®

The AirMax VS® connectors use innovative edge-coupling and air dielectric between adjacent conductors to deliver insertion loss and crosstalk. This technology, invented by Amphenol ICC, enabled low cost, high performance connectors that are a leading backplane interconnect solution for telecom, networking, server, and storage applications.

The shieldless Open Pin Field Design with no pre-assigned ground pins provides the ultimate flexibility in board layout. The AirMax VS® connectors addresse a broad range of system architectures, including backplane, midplane, coplanar, midplane orthogonal, cabled backplane, and mezzanine applications.

This is a broad, high volume product family that system continues to earn business when competing with the many more expensive and complex shielded connector systems. This is due in part because of its high density, simple modular construction and low cost.

Further enhancements of the AirMax® product family are seeing speeds increase up to 25Gb/s, enabling customers to design electronic systems that are highly functional and cost effective. This enables backward compatibility with legacy systems and forward compatibility with the most advanced designs.

Amphe-EX

The new Amphe-EX™ is complimentary to Amphenol’s industry-proven Star-Line EX™.  In addition, the rugged Amphe-EX™ connectors are ATEX, IECex, EAC approved for Zone 1,2,21,22 rated applications. Signal and  Fiber Optic Custom Cable Assemblies available up request.

Features & Benefits
 
·         Conductor options: Copper, Fiber Optic, Coaxial, Mixed
·         Flexible Insert Layout Options
·         Machined High Grade Aluminum Hardware
·         Corrosion Resistant Plating exceeds 300 day salt spray testing
·         Aluminum/Brass/Stainless Steel Material Options
·         RJ 45 and USB insert options available
·         Double lead mating provides ease of mating
·         Large wire spacing in backshells allows easy contact installation
·         Accepts a wide variety of cable options, including armored styles
·         Numerous alternate insert rotations available to prevent miss-mating
 
 
Specifications
·         SIRA ATEX Certified 07ATEX1229X
·         SIRA IECEx Certified  SIR 08.0029X
·         Cenelec IP 68 rated
·         RoHS Compliant Available
·         Inserts designed around Mil –DTL 38999 standards

Amphe-ex Zone 2 Ex nA IIB+H2 T3 Gc Tamb 100 °C

The new Amphe-EX™ Zone 2 high temp is a special version certified  ATEX, IECex, CSA US & Canada Hazloc approved for Zone 2,22 rated applications. Custom Cable Assemblies available up request.

Amphe-Ex Zone 2 Tamb +100 °C 
Ex nA IIB+H2 T3 Gc
Tamb = -40 °C to +100 °C 

Layouts
·         15: 5 (5 x 16AWG)
·         21: 16 (21 x 16AWG)

Rating
·         60 Vac / 85 Vdc, 7 Amps maximum

Specifications
·         SIRA ATEX Certified 15ATEX4314X
·         SIRA IECEx Certified  SIR 15 0112X
·         CSA (HAZLOC  US & Canada ) 70139263
·         RoHS Compliant Available

 

Aligned to 

CAN/CSA-C22.2 No. 0-10 (R2015) - Canadian Electrical Code, Part II - General requirements
CAN/CSA-C22.2 No. 60079-0:15 - Electrical apparatus for explosive gas atmospheres- Part 0: General requirements
CAN/CSA-C22.2 No. 60079-15:16 - Explosive atmospheres — Part 15: Equipment protection by type of protection “n”
CAN/CSA-C22.2 No. 182.3-16 - Special use attachment plugs, receptacles, and connectors
ANSI/UL 60079-0: 6th Edition - Electrical apparatus for explosive gas atmospheres- Part 0: General requirements
ANSI/UL 60079-15: 4th Edition - Explosive atmospheres — Part 15: Equipment protection by type of protection “n”
UL 1977: 3rd Edition - UL Standard for Safety Component Connectors for Use in Data, Signal, Control and Power Applications

EN 60079-0:2012 General requirements for all Ex equipment
EN 60079-15:2010 Non-Arcing Ex nA

IEC 60079-0 : 2011 Explosive atmospheres - Part 0: General requirements Edition: 6 0
IEC 60079-15 : 2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" Edition: 4

 

Amphe-PPM

The Amphe-PPM is a rapid mate, push/pull connector which provides positive mating in limited space and ease of us. The design features of the Amphe-PPM allow consumers to save cost in space savings and in installation.

Aquant

The right moisture meter makes all the difference when surveying, cleaning or restoring a property after water damage! The Protimeter Aquant (non-invasive) is the sister product to the Surveymaster and helps you locate moisture quickly in a wide range of materials with a RF measurement system unique to the Protimeter. This system allows you to detect moisture up to ¾” (20mm) below and behind the surface in the most efficient way possible.

All Protimeter instruments have a two-year warranty.


Features

Rugged construction

Large backlit display

Non-invasive measurement up to ¾” (20mm) below the surface

Industry leading 2-year warranty

 

Benefits

Easy-to-use

Allows rapid assessment of building moisture

Instant readings in a wide range of building materials

Non-invasive measurement not adversely affected by surface moisture

 

By Amphenol Advanced Sensors | Protimeter

 

BergStak HS™ 0.50mm Mezzanine Connector - Basics

FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS

BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.

The BergStak HS™ series meets the new 25Gb/s performance requirement.

  • Available in 50 positions
  • Available in 12mm stack height
  • 5 and 8mm stack heights, and up to 120 pin configurations available upon request
BergStak® 0.40mm Floating Board-to-Board Connector

3-AXIS FLOATING FEATURE, SHIELDED DESIGN
BergStak® 0.40mm is a floating type Board-to-Board (BTB) connector with 32 pin count and stack height of 5mm. This solution comes with an all-round shield for superior EMI performance. Its unique connector design has a floating range of ±0.40mm in the X, Y and Z directions. BergStak® 0.40 ideal for automotive applications, especially cameras mounted on vehicles.

  • Fine pitch design at 0.40mm
  • Supports speed performance up to 3Gb/s
  • Floating range of ±0.40mm in the X, Y and Z directions
  • Shielded design for superior EMI performance
  • Polarized key for Poke-Yoke mating
Bergstak® 0.50mm Mezzanine Connector

The BergStak® product range is expanded to include 0.5mm mezzanine connectors.

Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments.

Designed with scoop-proof housing, the terminals are protected from damage when parts are mated.

BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector.

BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.

BergStik 2.54mm - Basics

BergStik® 2.54mm unshrouded headers are available in surface-mount (SMT), through-hole (THT), press-fit, stacking and pin-in-paste (PIP) versions. Designed in single and double row, they are available in straight or right angle options, from 2 to 72 positions.

Featuring a "breakaway" design, each connector can be cut or broken to length to suit the application profile. The maximum current rating is 3A per contact.

This product range is extended with BergStik® 2.54mm unshrouded vertical headers in 0.25μm plating, available in standard sizes. It offers an economical solution for various applications. It is also specified up to 100 mating cycles.

BergStik® product range provides Board-to-Board, Wire to-Board and Cable-to-Board interconnect solutions for all electronic equipment and devices.

C-Type

The C Type series is a weatherproof medium size series. The series features a coupling two-stud bayonet lock.It has a constant 50 Ω impedance and performs up to 11 GHz. However, it may be used with 75 Ω cable at lower frequencies (below 300 MHz).

C15

The six- and seven-pole circular connectors of the C015 series are according to the requirements of EN 175 000. The series is distinguished by its stable design and easy handling. They are also compatible with connectors according to MIL-C-5015 of housing size 14S. Their main applications are continuous and proportional valves as well as measuring and control instrumentation.

M16

M16 size with screw locking according to IEC 61076-2-106, Metal locking ring, Shieldable, 2-8, 12 and 14 positions for crimp and solder, up to 10A and 300 V, IP 40, Male and female cable connectors straight and angled, Male and female receptacles for front and rear panel mointing and PCB mounting, UL registred under file number E 63 093 UL

M16

M16 size with Bayonet locking according to IEC 61076-2-106, Plastic Bayonet ring, Shieldable, 2-8, 12 and 14 positions for crimp and solder, up to A10 A and 300 V, IP 40, Male and female cable connectors straight and angled, Male and female receptacles for front and rear panel mounting and PCB mounting, UL registred under file number E 63 093 UL

M16

M16 size with screw locking according IEC 61076-2-106, Metal locking ring, Shieldable, 3-8, 12 and 14 positions for crimp and solder, Up to 10A and 300V, IP 69K / IP 67 / IP 65, Male and female cable connectors and straight and angled, Male and female receptacles for front and rear panel mounting and PCB mounting, UL registred under file number E 63 093 UL, Connectors are compliant with AISG - Standard.