Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
0.21mm HFMK Series (Non-ZIF FPC)

LOW PROFILE AND COMPACT

HFMK Series FPC is a 0.21mm pitch Non-ZIF FPC that is lowest in height suitable for applications where space is a constraint.

  • Low profile and compact
  • FPC locking arm
  • Single action Push-pull FPC termination
0.30mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. 

Amphenol ICC offers a full range of 0.3mm pitch connectors for applications where board space is at premium. Amphenol ICC’s 0.3mm pitch connectors are available in 13 to 51 positions. 

0.40mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.  As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  The SFGL series 0.4mm pitch connector offers a high pin count with a small footprint and includes such innovative

0.50mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. 

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.  Amphenol ICC has one of the broadest ranges of 0.5mm flex circuit connectors in the industry. 

0.80mm Board-To-Board 100Ω - G832MC Series Connector

0.80MM PITCH, 100Ω BOARD-TO-BOARD SOLUTION
Amphenol high speed board-to-board connectors provide high contact force reliability ensuring strong connectivity, forced insertions, and removals.

Broad range of stacking heights and pin counts are offered to provide maximum design flexibility.

Amphenol 0.80mm pitch connector design is suitable for high performance applications.

  • Superior signal integrity (SI) performance
  • High contact force ensures mating reliability
  • Polarization key at pin edge to prevent misalignment
  • All stack heights meet SAS 3.0, 12GT/s
  • Gold flash plating protects against corrosion
1.00mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.

15mm Position Sensor/ Potentiometer

The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and  multi-purpose Control applications such as:

  • Automotive HVAC, Seat, Rear-view mirror actuator feedback sensors and HVAC Controls.
  • Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers...
  • Timer & Function/Programme Select for Washing  Machines, Dishwashers and all White Goods in general.
  • Size and Position detectors.
     
Standard Features:
  • Conceived and designed for easy customisation.
  • SMD or Through-hole Mount.
  • Endless Rotation (360º).
  • Wide Electrical Angle (340º +/-10º).
  • Extended Mechanical Life (100k cycles).
  • Working Temperature Range: -40ºC to +120ºC.
  • Low Profile.
  • Linearity 3%. 
  • Embossed Tape or Bulk packaging.
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.
     

More information.

4X InfiniBand

High Speed Cables. 

786A-D2 general purpose accelerometer

786A-D2 general purpose accelerometer

Top exit, general purpose, MIL-C-5015 connector, case isolated, 100 mV/g

  • Longest product lifetime in the industry
  • Rugged design, corrosion resistant
  • Hermetic seal
  • Case isolated
  • Reverse wiring protection
786A-IS general purpose accelerometer

786A-IS general purpose accelerometer

Top-exit, general purpose, MIl-C-5015 connector, case isolated, 100 mV/g

  • Longest product lifetime in the industry
  • Rugged design, corrosion resistant
  • Hermetic seal
  • Case isolated
  • Reverse wiring protection
97 Series

Amphenol's 97 Series is the lowest cost cylindrical interconnect solution in the proven 5015 family connector style. An extremely versatileconnector family, the 97 Series offers six shell options, 128 different contact arrangements, 1 to 52 circuits, one of the largest selections of insert patterns on the connector market, and crimp, solder, thermocouple and PCB (100 suffix) contacts.

360º rotary position sensor.

This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.


Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.

Main features
  • Electrical angle: 360º
  • Designed for direct input to microprocessor.
  • SMD, Horizontal or Through-hole Mount
  • Endless Rotation
  • Extended Mechanical Life
  • Working Temperature Range (-40ºC to +120ºC)
  • Low Profile (4.4 mm)
  • Linearity (independent): ±2%
  • Embossed Tape or Bulk packaging
  • Reflow Soldering capability
  • Plug-in shafts
  • Shaft insertable from both sides
  • Polarised "T" rotor (European Home Appliance standard)
  • Ideal for Consumer Control and position sensing applications
  • IP54 protection according to IEC 60529

More information.

AirMax VS2®

AirMax VS2® connectors provide a migration path from AirMax VS® for speeds up to 20Gb/s, providing margin of safety for typical 802.3ap system performance with the flexibility of an open pin field design. The connectors leverage AirMax VS® and VSe® design features and technology to achieve improved signal integrity and mechanical attributes compared to AirMax VS® connectors.

The connector utilizes Amphenol ICC technology for a shieldless design with no metallic plates and closely coupled differential pair design to yield low loss and low crosstalk.

AirMax VS2® connectors are mating-compatible to both AirMax VS® and AirMax VSe® connectors and require no changes to connector PCB footprints. The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new and upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards, or blades that are already in the field as well as new or future higher-speed module cards.

Right angle and vertical receptacles and headers support backplane, midplane and coplanar applications.

AirMax VSe®

Next-generation AirMax VSe® connectors provide a migration path for up to 25Gb/s per differential pair with the flexibility of an open pin field design. The connectors also feature backwards mating-compatible interfaces to existing AirMax VS® connectors with minimal changes to connector footprints.

The connectors combine Amphenol ICC technologies for a shieldless design with no metallic plates and closely edge-coupled differential pairs with innovative design improvements to yield low loss and low crosstalk.

Right angle receptacles and right angle headers will support backplane, midplane or coplanar applications.

The mating-compatible interfaces and capability to preserve critical pin assignments can provide opportunities for cost savings as new or upgraded equipment is deployed. For example, a backplane or chassis can be designed to allow the installation and continued use of legacy daughter cards, line cards or blades that are already in the field as well as new or future higher-speed module cards.

AirMax VS®

The AirMax VS® connectors use innovative edge-coupling and air dielectric between adjacent conductors to deliver insertion loss and crosstalk. This technology, invented by Amphenol ICC, enabled low cost, high performance connectors that are a leading backplane interconnect solution for telecom, networking, server, and storage applications.

The shieldless Open Pin Field Design with no pre-assigned ground pins provides the ultimate flexibility in board layout. The AirMax VS® connectors addresse a broad range of system architectures, including backplane, midplane, coplanar, midplane orthogonal, cabled backplane, and mezzanine applications.

This is a broad, high volume product family that system continues to earn business when competing with the many more expensive and complex shielded connector systems. This is due in part because of its high density, simple modular construction and low cost.

Further enhancements of the AirMax® product family are seeing speeds increase up to 25Gb/s, enabling customers to design electronic systems that are highly functional and cost effective. This enables backward compatibility with legacy systems and forward compatibility with the most advanced designs.

Amphe-PRB

The Amphe-PRB is a plastic reverse bayonet connector. Designed for one, two, or three phase applications with up to five contacts including one for ground. This series lends itself well to a wide variety of applications in alternative energy, telecommunications, or anything that uses an electric motor like electric or hybrid vehicles. The PRB series is ideal for in field installation with crimp and set screw terminations using standard contacts or our patented RADSOK® sockets as an option. The Amphe-PRB is touch proof and rugged enough to withstand exposure to moisture with an IP67 rating.

A309

Amphe-309 series includes plugs, connectors, receptacles, inlet, and mechanical interlocks, all of which comply with the requirements of IEC 603 09-1 & 2, EN 60 309-1 & 2, BS 4343-2 1992, and UL 1682 & 1686.

The Amphe-309 consists of both IP44 (Splashproof) and IP67 (Watertight) devices for 16A, 20A, 30A,32A, 60A, 63A, 100A and 125 A.The series range covers all clock positions in use from low profile, watertight, and Heavy Duty solutions.

Approved and certified by CE, UL, CSA and CCC, Amphe-309 covers commercial and industrial applications for international markets, as well as, the North American market.

Features & Benefits
·         Plug, receptacle, connector, inlet and mechanical interlock
·         16A to 125A, up to 690V or 500V DC
·         Low voltage <50V available
·         ATEX/IECEx version available
·         Custom Amphe-309 cable assemblies
 
Specifications
·         IP 44
·         IP 67
·         UL, CAS, CE certified

BergStak HS™ 0.50mm Mezzanine Connector - Basics

FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS

BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.

The BergStak HS™ series meets the new 25Gb/s performance requirement.

  • Available in 50 positions
  • Available in 12mm stack height
  • 5 and 8mm stack heights, and up to 120 pin configurations available upon request
BergStak® 0.40mm Floating Board-to-Board Connector

3-AXIS FLOATING FEATURE, SHIELDED DESIGN
BergStak® 0.40mm is a floating type Board-to-Board (BTB) connector with 32 pin count and stack height of 5mm. This solution comes with an all-round shield for superior EMI performance. Its unique connector design has a floating range of ±0.40mm in the X, Y and Z directions. BergStak® 0.40 ideal for automotive applications, especially cameras mounted on vehicles.

  • Fine pitch design at 0.40mm
  • Supports speed performance up to 3Gb/s
  • Floating range of ±0.40mm in the X, Y and Z directions
  • Shielded design for superior EMI performance
  • Polarized key for Poke-Yoke mating
Bergstak® 0.50mm Mezzanine Connector

The BergStak® product range is expanded to include 0.5mm mezzanine connectors.

Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments.

Designed with scoop-proof housing, the terminals are protected from damage when parts are mated.

BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector.

BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.

BergStik 2.54mm - Basics

BergStik® 2.54mm unshrouded headers are available in surface-mount (SMT), through-hole (THT), press-fit, stacking and pin-in-paste (PIP) versions. Designed in single and double row, they are available in straight or right angle options, from 2 to 72 positions.

Featuring a "breakaway" design, each connector can be cut or broken to length to suit the application profile. The maximum current rating is 3A per contact.

This product range is extended with BergStik® 2.54mm unshrouded vertical headers in 0.25μm plating, available in standard sizes. It offers an economical solution for various applications. It is also specified up to 100 mating cycles.

BergStik® product range provides Board-to-Board, Wire to-Board and Cable-to-Board interconnect solutions for all electronic equipment and devices.

boardmate

Amphenol board|mate connectors combine high power contact technology from Amphenol and PCB blocks from Wuerth Elektronik. Instead of soldering they are pressed in into the circuit board so the board is no exposed to high temperature during soldering.

Aluminum Busbar - Power Distribution

Custom designed power conductor made from aluminum to reduce weight and cost 

Benefits

  • Approximately a 20% cost reduction relative to copper
    • Cost stability
  • Approximately 50% lighter than copper (includes the extra volume)

Features

  • Variety of plating options available
  • Can be designed to replace a copper busbar considering thermal & physical properties
  • Powder coating for safety
  • Single or multi-layer laminated 
Copper Busbar - Power Distribution

Custom designed power conductor made from copper 

Benefits

  • Space saving relative to aluminum  
  • Efficient thermal and electrical properties
  • Lower Insulation Resistance (IR) drop

Features

  • Industry standard material (commonly used/accepted)
  • Versatile connection and configuration options
  • Variety of plating options available
  • Powder coating for safety
  • Single or multi-layer laminated
C15

The six- and seven-pole circular connectors of the C015 series are according to the requirements of EN 175 000. The series is distinguished by its stable design and easy handling. They are also compatible with connectors according to MIL-C-5015 of housing size 14S. Their main applications are continuous and proportional valves as well as measuring and control instrumentation.

M16

M16 size with screw locking according to IEC 61076-2-106, Metal locking ring, Shieldable, 2-8, 12 and 14 positions for crimp and solder, up to 10A and 300 V, IP 40, Male and female cable connectors straight and angled, Male and female receptacles for front and rear panel mointing and PCB mounting, UL registred under file number E 63 093 UL

M16

M16 size with Screw locking according to IEC 61076-2-106, Metal locking ring, Shieldable, 2-8, 12 and 14 positions for crimp and solder, up to A10 A and 300 V, IP 40, Male and female cable connectors straight and angled, Male and female receptacles for front and rear panel mounting and PCB mounting, UL registred under file number E 63 093 UL

M16

M16 size with screw locking according IEC 61076-2-106, Metal locking ring, Shieldable, 3-8, 12 and 14 positions for crimp and solder, Up to 10A and 300V, IP 69K / IP 67 / IP 65, Male and female cable connectors and straight and angled, Male and female receptacles for front and rear panel mounting and PCB mounting, UL registred under file number E 63 093 UL, Connectors are compliant with AISG - Standard.

C091D+

* Screw locking according to IEC 61076-2-106* Metal locking ring * 2 - 8, 12 and 14 positions for crimp and solder * IP 68 * Internal strain relief * Male and female cable connectors straight and angled * Male and female receptacles see C091D * UL registered under file number E 63 093 UL * Reduced Assembling Time * Easy and reliable assembly * Outer cable diameter up to 10,5mm * 360° shielding (resistance 30db)

eco|mate C16-3

When there are rough environmental conditions the series C16-3 is in. the programm includes a variety of housing types an a wide range of contact arrangements and contact technologies. Solutions up to 900 V or 50 A can be realized. The housing made of high performance composite material is extremly robus and allows a low weight of the connector. There are versions with the proven screw terminals for easy field installation and crimp versions for const-effective machine processing. The bayonet quick release allows an easy and reliable handling of the connectors