Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
Standoffs

Designed to help guide wire bundles through aircraft, Amphenol Pcd's high performance Standoffs were designed with strength, stability, and weight reduction in mind. Our Standoffs are made with PEEK— a very strong, non-conductive/non-corrosive, and lightweight material - designed to replace heavier aluminum. They come with a locking feature for security, are designed with ribs to provide additional strength, and support a wide range of clamp sizes and raceways for added convenience.

Thermometrics NTC Thermistors Surface Mount Devices (SMD)

Thermometrics NTC Type Surface Mount Devices (SMD) are intended for temperature measurement, control and compensation. They are suitable for standard soldering techniques and availabe in a range of sizes, including 0402, 0603, 0805 and 1206.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • Nickel barrier tin-plated terminations for soldering
  • High sensitivity to changes in temperature
  • Wide operating temperature range -40°C to 125°C
  • Rugged construction
  • Excellent solderability without “tombstoning”
  • Glass-coated ceramic between electrodes for improved stability
  • Supplied in tape-and-reel packaging
  • Available in other material systems

 

ZTP-315 is a Thermopile Infrared (IR) Sensor

Thermometrics ZTP-315 is a Thermopile Infrared (IR) Sensor that is used for non-contact surface temperature measuring. The ZTP-315 Model consists of thermo-elements, flat infrared filter and a thermistor for temperature compensation, all in a hermetically-sealed TO-46 (18) package. There are also a variety of filters available to help maximize performance in specific applications.

 

Features

  • Non-contact measurement
  • Wider surface area measurement
  • Small-size sensor package
  • Included ambient temperature (thermistor) sensor for compensation
  • High sensitivity
  • Fast response time
  • Low cost

By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermopile Infrared (IR) Sensor - ZTP-315 | Thermometrics

Thermometrics ZTP-315 Thermopile Infrared (IR) Sensor is used for non-contact surface temperature measuring. The ZTP-315 Model consists of thermo-elements, flat infrared filter and a thermistor for temperature compensation, all in a hermetically-sealed TO-46 (18) package. There are also a variety of filters available to help maximize performance in specific applications.

Features:

  • Non-contact measurement
  • Wider surface area measurement
  • Small-size sensor package
  • Included ambient temperature (thermistor) sensor for compensation
  • High sensitivity
  • Fast response time
  • Low cost

By Amphenol Advanced Sensors | Thermometrics, Inc.

ZTP-188MA Thermopile Infrared (IR) Sensor Module

Thermometrics ZTP-188MA Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring and presents temperature-compensated 8 linear array outputs via I2C with optics (silicon lens). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-188MA uses 4-wire connections: two signals for I2C output, single power supply and ground. The sensor is fully-calibrated with a wide object and ambient temperature range. Lens for different fields of view are available on request.

 

 

Features

  • Digital temperature output
  • I2C communication protocol
  • Fully calibrated and compensated
  • 1 x 8 array module
  • Compact size and large detection range
  • Low power consumption
  • Multi-zone detection

 

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

ZTP-188ML Thermopile Infrared (IR) Sensor Module

Thermometrics ZTP-188ML Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring and presents temperature-compensated 8 linear array outputs via I2C with optics (silicon lens). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-188ML uses 4-wire connections: two signals for I2C output, single power supply and ground. The sensor is fully-calibrated with a wide object and ambient temperature range. Lens for different fields of view are available on request.

 

Features

  • 1 x 8 array module
  • Digital temperature output
  • Fully calibrated and compensated
  • UART output
  • Compact size and large detection range

By Amphenol Advanced Sensors | Thermometrics, Inc.

ZTP-315MIH Thermopile Infrared (IR) Sensor Module

Thermometrics ZTP-315MIH Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring. It presents temperature-compensated single outputs via voltage output with optics (glass lens for high temperature detection). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-315MIH uses 3-wire connections for output signal, single power supply and ground.

The field of view is approx ±9 degrees for 50% normalized output with a total size is only 33 mm X 17 mm.

 

Features

  • High temperature measurement
  • Single module
  • Ambient temperature (thermistor) sensor included for compensation
  • Fully calibrated and compensated
  • Analog output

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

 

Thermopile Infrared (IR) Sensor Module - ZTP-315MIH | Thermometrics

Thermometrics ZTP-315MIH Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring. It presents temperature-compensated single outputs via voltage output with optics (glass lens for high temperature detection). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-315MIHuses 3-wire connections for output signal, single power supply and ground. The field of view is approx ±9 degrees for 50% normalized output with a total size is only 33 mm X 17 mm.

Features:

  • High temperature measurement
  • Single module
  • Ambient temperature (thermistor) sensor included for compensation
  • Fully calibrated and compensated
  • Analog output

By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermopile Infrared (IR) Sensor Module) - ZTP-188MA | Thermometrics

Thermometrics ZTP-188MA Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring and presents temperature-compensated 8 linear array outputs via I2C with optics (silicon lens). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-188MA uses 4-wire connections: two signals for I2C output, single power supply and ground. The sensor is fully-calibrated with a wide object and ambient temperature range. Lens for different fields of view are available on request.

Features:

  • Digital temperature output
  • I2C communication protocol
  • Fully calibrated and compensated
  • 1 x 8 array module
  • Compact size and large detection range
  • Low power consumption
  • Multi-zone detection

By Amphenol Advanced Sensors | Thermometrics, Inc.

ZTP-135L

Thermometrics ZTP-135L is a Thermopile Infrared (IR) Sensor that is used for non-contact surface temperature measuring. The ZTP-135L model consists of thermo-elements, flat infrared filter and a thermistor for temperature compensation, all in a hermetically-sealed TO-46 (18) package. There are also a variety of filters available to help maximize performance in specific applications.

 

Features

  • Non-contact measurement
  • Wider surface area measurement
  • Small-size sensor package
  • Included ambient temperature (thermistor) sensor for compensation
  • High sensitivity
  • Fast response time
  • Low cost

 

By Amphenol Advanced Sensors | Thermometrics, Inc.

NTC Type JR Series of Chip Thermistors in Eyelet Tag

The Thermometrics NTC Type JR Series of Chip Thermistors in Eyelet Tag are chip thermistors with insulated flexible wires and housed in an eyelet tag. Suitable for surface temperature measurement. Typical applications include semi-conductor heatsinks and enclosure panels.

 

Features

  • Sensing element electrically isolated from tag
  • Two standard resistance values: 10 kΩ & 20 kΩ nominal at 77°F (25°C)
  • Eyelets to fit M3, M4 & M5 screw sizes
  • Range of wire lengths 1.97 in to 78.74 in (50 mm to 2000 mm)

 

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

SIM/EN4165 VG96513

SIM/EN4165 (VG96513 in progress) is a modular, multifunctional rectangular connector. It consists of shells and modules, which together create an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Its flexibility and simplicity during design and operation, makes SIM a competitive alternative for a wide range of applications. They come in metallic version for robust applications. Also available in custom design plates and Rack & Panel versions.

  • Military & Commercial Aerospace specification for rectangular modular connectors
  • Space efficient & modular design
  • SIM modules in overmold Technology
  • Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
  • Available in standard crimp contacts (#8 to #23) and PCB contacts
  • Available in standard Mono, 2 & 4 bay, or custom configurations
  • EN4165 specification is comparable to U.S. MIL-STD-810 in performance
  • Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853