Product Finder

Amphenol Air LB France 1750 series consists of Quick junction modules for signal and low current distribution, where sealing (IP66 / IP68 and IP69K), space and weight-saving are prime requirements. Specifically suited for wiring optimization, then offering weight and cost savings, these track-mounted distribution modules (on metallic or composite track) are available from 8 contacts size 12 up to 36 contacts size 22 in different contact configurations. They also come in hybrid or ground versions, as well as PCB or component carrier versions. Fully REACH / RoHS compliant and conform to ABD0031 and FAR 25853 (Fire, Smoke and Toxicity).

Main features :

• Military & Commercial Aerospace specification
• Modules are fitted with male crimp contacts
• Derived from EN3708 and NSA937901 standards
• Compact design
• Overmold Technology offering excellent sealing performances
• Suited to save cable linear meters, then cost and weight
• Versatility of mixing on metallic or composite tracks
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

Amphenol Air LB France 1765 series is derived from the 1750 series. They consists of components carrier versions suited for diodes, resistors, fuses etc. They offer a perfect sealing (IP66 / IP68 and IP69K), space and weight-saving. Mounting on composite or metallic tracks.

Main features :

• Military & Commercial Aerospace specification
• Compact design
• Overmold Technology offering excellent sealing performances
• Versatility of mixing on metallic or composite tracks with 1750 series modules

The 2M Series is a superior and versatile connector designed and tested to mil-spec standards, comparable to MIL-DTL-38999. The 2M Series is designed for interconnect applications requiring high performance and reduced size and weight. This smaller, high density, lightweight connector far exceeds the competition in quality and performance levels. 2M is intermateable with Glenair's Mighty Mouse.

• 70% weight savings compared to MIL-DTL-38999
• 50% smaller than MIL-DTL-38999
• Broad family with many styles and options
• Designed for high-reliability aerospace & defense applications
• For use in the harshest environments

Stand-off receptacles for 38999 allow to fix directly the connector to the board with 3 or 4 screws. The square flange and jam nut receptacles are equipped with PC tail contacts and stand-off. This feature avoids the use of fastening device during the soldering process and ensures a perfect grounding between the shell of the connector and the ground of the board.

Dedicated to video application in harsh environment (military and aerospace applications), the 75 Ohms impedance matched contacts offer several advantages for reliable signal transmission in the world largest connector platform in the world (MIL-DTL-38999). Features and benefits:• Meet HD-TV protocols (3G-SDI) • Conform to AS39029/59 and /60 interface • Crimp and PCB version available • Custom contacts and easy cable adaptation further customer request.

Amphenol Aerospace's High Speed Solutions offers a fully integrated standalone Analog-to-Digital Converter package.  Our integrated Analog-to-Digital Converters support input through High Frequency 50Ω MMCX RF type interconnects in a rugged MIL-DTL-38999 ultra-small form factor package. The analog inputs are single-ended and coupled to the latest in TI’s family of open architecture high speed ADC devices using a balun and AC coupling capacitor configuration to produce the broadband differential input required by the devices.

• A-to-D conversion integrated with rugged MIL-DTL-38999 interconnects
• State-of-the-art ADC devices from TI
• Open system interface for easy integration with any FPGA
• Eliminates expensive phase matched RF cables and saves system design cost

The ARINC 801 cylindrical fiber optic connector suite is suitable for aerospace and military applications. It is available in standard D38999 plug and receptacle shells and inserts are available to support 2 to 32 channels.  Both PC and APC are supported.

Amphenol FSI also offers the companion ARINC 801 terminus, which uses a standard 1.25mm ferrule and sleeve that can be terminated with standard LC termination procedures. The terminus can be inserted and removed from the connector with a standard size 16 contact removal tool. The terminus is available in both multimode and single mode versions. The fiber optic contact provides low insertion loss (0.3dB max, multimode) and back reflection (-55dB, APC). All versions of the termini are available in non-pull proof (for tight structure FO cables) and pull-proof (loose structure FO cable construction) variations.

Features and Benefits:

• Qualified to the ARINC 801 Specification
• Precision alignment and components provide excellent optical performances
• Supports APC termini for RF-over-fiber and other applications requiring low back reflection
• Supports standard suite of 38999 backshells and accessories
• Removable ASR facilitates termini cleaning and maintenance
• High-density arrangements up to 32 channels

Amphenol Fiber Systems International (AFSI) offers a fully-compliant ARINC 801 fiber optic terminus for aerospace and military applications. The AFSI ARINC 801 uses a standard 1.25 mm ferrule and sleeve and can be terminated with standard LC termination procedures. The terminus can be inserted, or removed, from the connector with a standard size 16 contact removal tool. The terminus is available in both multimode and single mode versions. The fiber optic contact provides low insertion loss (0.3 dB max, multimode) and backreflection (-55 dB, APC). In addition to the standard PC end-face option, AFSI’s ARINC 801 is offered with an APC end-face for those applications requiring reduced backreflection. 

The terminus is highly flexible and is used primarily in ARINC 801, 600, 404, 781 and EPXA/B multi-channel connectors. The fiber optic contact is offered in with a pull-proof feature (allows the use of the contact in a connector without a strain-relief backshell) configuration, for both tight and loose tube cable.

Features and Benefits

• Flexible design for use in multiple connector types
• Genderless terminus allows one contact type
• Standard 1.25 mm LC ferrule interface allows the use of standard termination procedures and widely available tools
• Available in single mode and multimode
• PC, UPC or APC polishes available
• Pull-proof feature allows the use of the terminus in a connector without a backshell

Applications

• Airframe In-Flight Entertainment Systems
• Avionics
• Heads-Up Displays
• On-Board Communications
• Works with tight or loose structure cable

Amphenol offers superior electrical performance plus the rugged design of a glass-sealed or epoxy-sealed connector. Amphenol glass-sealed hermetic connectors are available in a wide variety of Mil-Spec and custom configurations. Amphenol epoxy-sealed connectors are a lightweight alternative to glass-sealed hermetic connectors.

• Hermetic: Leak rate of 1X10-7 cc He/sec or less
• Epoxy-Sealed: Leak rate of 10X10-5 cc He/sec or less
• Fused glass hermetic insert in stainless steel shell
• Same epoxy as used on EMI filter connectors
• Custom designs available

SV offers a wide range of IP67 and IP68 waterproof interconnect products designed to withstand rigorous environments and harsh elements. SV's line of waterproof adapters include hermetically sealed connectors to 1 x 10-8, making them ideal for high pressure, vacuum applications and the prevention of liquid or gas leakage.  

Ingress Protection ratings are used to specify the environmental protection of enclosures and casings around electronic products.

Features / Benefits: 

• Eliminate outside elements (i.e. water, air, gas, etc.)
• Ingress Protection (IP) Rating: IP 67 and IP 68
• Ruggedized / Reliable
• Custom configurations available

Applications:

• RF test and measurement boards
• Vacuum & Vacuum Test Applications
• Severe/Harsh Environments
• Military and Aerospace

Amphenol Aerospace High Speed Solutions offers copper-to-fiber and fiber-to-copper media conversion with our hybrid integrated connectors. The family consists of protocol independent and Ethernet media conversion converters with more products being developed to meet our customers’ application needs.

• Digital Media Converters
• Opto-Electronic Contacts
• Analog-to-Digital Converters
• Ethernet Media Converters

Amphenol's CTOS SM and CTOL SM is a unique expanded beam singlemode fiber optic connector. They are used in diverse applications such as Battlefield, UAV, Oil & Gas, Railway, and Broadcast. To make deployment easier, we developed a Compact Carrier Deployable System. This is the lightest and most compact solution available on the market.

In applications where the reliability and performance of electrical feedthroughs are critical, such as gas tight barriers or high-pressure differentials, hermetic feedthroughs are essential to maintain system integrity. Martec offers hermetic feedthroughs tailored specifically to your requirements, providing seals able to withstand pressures up to 60,000psi (4,100Bar), temperatures from cryogenic up to 1,000°C and for use in aggressive and hostile environments. Such seals can be manufactured using a range of materials such as Stainless Steel, Titanium, or Inconel.

• Hermetic seal - Low leak rates
• Pressure up to 60,000psi (400 Mpa)
• Fire wall capabilities to 1000°C (1832°F)
• Optimised Design

The standard and high density D-Subminiature connectors are available in five shell sizes offering a wide choice of contact positions: 9, 15, 25, 37, and 50 in standard density and 15, 26, 44, 62, 78, and 104 positions in high density. We offer filtered, sealed and compliant tail designs as well as custom crimp type or other terminations

Amphenol Fiber Systems International (AFSI) designs and manufactures world class harsh environment fiber optic connectors and cable assemblies for the military and aerospace markets. Cable assemblies built with D38999 connectors, used in military, avionics, and industrial applications, are a cornerstone offering in our industry leading product line, along with TFOCA-II®, M28876 and expanded beam cable assemblies.

The D38999 circular connector series is designed for harsh environments, particularly those with wide temperature ranges and high mechanical vibrations. This electrical connector is adapted for fiber optics by using M29504/4 and /5 termini. These termini fit into any size 16 contact cavity. 

Precise alignment is critical to fiber optic connectors. The tightly toleranced fiber optic D38999 connectors ensure precise alignment with precision machined polarization keys and keyways which reduce radial misalignment. This precision yields superior optical performance when compared to standard D38999 connectors. Tight tolerance D38999 connectors also have a positive bottoming surface and conductive surface plating, assuring exceptional EMI/RFI performance.

All D38999 connectors feature a non-conductive insert making this a great connector choice when optical fibers and electrical wires must be used in the same connector. The D38999 series offers a wide range of shell sizes, backshells and insert patterns. Standard contacts and termini are available making any design simple and cost-effective. 

AFSI’s goal is to exceed customer requirements with every cable assembly. AFSI frequently assists customers in designing and building custom cable assemblies. Additionally, AFSI has over 15 years of experience in building to customer prints. Our highly skilled technicians are trained to a wide variety of industry standard procedures critical to manufacturing harsh environment fiber optic cable assemblies. All AFSI cable assemblies are manufactured by expert technicians in our state-of-the-art, AS9100 certified facility. We are proud to serve virtually every major defense company in the United States, the US Army, US Navy, US Marines, US Air Force, many international defense companies and international militaries as valued customers.

Features & Benefits

• Rugged, multi-channel D38999 series III connectors
• Vast and varied selection of shell sizes, contact arrangements and number of contacts
• Incorporate proven M29504/4 & /5 termini
• Available in aluminum, stainless or composite materials
• Size 16 termini
• Physical contact (butt joint) interface is guaranteed through a spring loaded terminus (fiber optic contact) design

The NovaSensor NPA-201 Digital Output Absolute Pressure Sensor provides low power consumption and compact size, making it ideal for battery-powered and mobile applications or any application where size is a constraint. In today’s growing market for portable electronics and wearables with multiple parameters being measured there are many applications that require an accurate measurement of barometric pressure to determine factors such as altitude.

Features:

• 260 to 1260 mBar absolute pressure range
• Temperature measurement included
• Sleep State current <250nA (25°C)
• Temperature resolution: <0.003K/LSB
• 16bit pressure and temperature resolution
• Operation temperature: –40°C to +85 °C
• I2C interface
• Operating range 1.7 ~ 3.6V
• Small size package (2.0 x 2.5 x 1.0mm)
• 8-HCLGA package
• Fully Calibrated and Compensated
• Digital compensation via 18bit internal digital signal processor (DSP) running a correction algorithm

By Amphenol Advanced Sensors | NovaSensor

Dualok is an enhanced anti-decoupling mechanism that can be used on virtually any cylindrical plug connector and backshell. The Dualok Interconnect System greatly improves electrical performance in harsh environments while providing a size and weight savings when compared to standard connectors in the same class. Dualok technology is applied to the plug connector and backshell only and will mate with standard receptacles. 

• Better shell-to-shell conductivity
• Assures EMI protection at high frequencies
• Extreme vibration capabilities at wide temperature range
• Enhanced corrosion protection with composite materials
• Lightweight, hybrid composite/metal design
• Smaller footprint/space savings

Single and Dual Splices and Electronic Splices are designed to provide a quick and efficient solution to customer wiring requirements. 

Single and Dual Wire Splices meet MIL-T-81714/11 & 12 requirements and are highly resistant to temperature and fluids.

TJSE Electronic Modules can be supplied with a wide variety of diodes, resistors, capacitors, and fuses within the splice itself. TJSE Electronic Splices meet the electronic parameters of MIL-81714/24 and allow customers to incorporate system modifications into a wire bundle, avoiding changes in panels or boards.

Amphenol Pcd’s Electronic Terminal Junction Splices are available with a variety of components and in a wide range of configurations. Components available include but are not limited to diodes, resistors, fuses, capacitors, thyristors, and inductors, and are also available with multiple components within one module. The following are currently available Electronic Terminal Junction Splices, although there are new configurations produced regularly and customized components are also available.

Amphenol's EMI/EMP Protection Connectors offer the versatility of standard connectors with EMI/EMP protection for sensitive circuits. Internal housing of the EMI/EMP devices eliminates costly and bulky exterior discrete protection devices. Virtually all major MIL-Spec circulars can be incorporated with filter devices.

The Amphenol Air LB France EN4165 / SIM connectors (Modular Interconnection System) is a modular, multifunctional rectangular connector. It consists of shells and modules, which together create an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Its flexibility and simplicity during design and operation, makes SIM a competitive alternative for a wide range of applications. They come in metallic version for robust applications, or in composite version for weight saving applications. Also available in custom design plates and Rack & Panel versions.

Main features :

• EN4165 qualified
• Military & Commercial Aerospace specification for rectangular modular connectors
• Space efficient & modular design
• SIM modules in overmold Technology
• Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
• Available in standard crimp contacts (#8 to #23) and PCB contacts
• Available in standard Mono, 2 & 4 bay, or custom configurations
• EN4165 specification is comparable to U.S. MIL-STD-810 in performance
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

Amphenol Air LB France SIM series 3 is a scoop-proof modular, multifunctional rectangular connector, derived from the legacy EN4165 connectors series 2. It consists of shells and modules, which together create an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Its flexibility and simplicity during design and operation, makes SIM a competitive alternative for a wide range of applications. They come in metallic version for robust applications.

Main features :

• Military & Commercial Aerospace specification for rectangular modular connectors
• Space efficient & modular design
• Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
• Available in standard Mono, 2 & 4 bay, or custom configurations
• SIM modules in overmold Technology
• EN4165 specification is comparable to U.S. MIL-STD-810 in performance
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

Amphenol Air LB France EN4165 / SIM plates are derived from EN4165 standard connectors. It consists of customer shells fitted with the whole range of EN4165 standard modules, together creating an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Customs plates can easily be intergrated at the rear of electronic boxes, or fully replace boxes themselves. EN4165 / SIM plates are also suitable to connectorize boxes or structure parts, aiming to save parts and then simplify the supply chain. 

Main features :

• Designed and qualified according to EN4165 standard
• Scoop-proof and blind mating shells available
• SIM modules in overmold Technology
• Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
• Custom design
• Connectorization of boxes or structures aiming to save parts and simplify the supply chain

The Amphenol Air LB France EN4165 / SIM Monomodule Connectors (ARINC 809) are a mono modular, push-pull connectors that are ideal for In-Flight Entertainment Systems, Cabin Service Systems, and other interconnect system requirements. Especially suited for applications where shielding is mandatory.

Main features :

• EN4165 qualified
• Military & Commercial Aerospace specification for rectangular modular connectors
• Fully qualified and compliant with ARINC 809 specifications
• Lightweight and robust thermoplastic; metalized for shielding
• More than 20 different inserts to choose from including butt joint and expanded beam optical contacts, MT ferrule, High speed..
• SIM modules in overmold Technology
• Fixing accessories, multiple colors, flight caps and 3-pin quick install versions are also available
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

This modular composite splice provides a reliable and simple connection between two EN4165 / SIM modules. Derived from the Amphenol Air LB France EN4165 / SIM connectors series 2, this splice is available with or without cable clamp, and/or flange. It can be fixed on/under a structure or Feed-through and can be fitted with the whole range of EN4165 / SIM modules. In-Seat Modular & Flexible Wiring; Quick install interconnect, splicing.

Main features :

• Military & Commercial Aerospace specification for rectangular modular connectors
• Space efficient & modular design
• Compatible with the whole range of EN4165 / SIM modules
• SIM modules in overmold Technology
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

Amphenol has developed cylindrical and rectangular connectors which protect sensitive components from Electrostatic Discharge (ESD) without diodes, varistors, gas tubes, or “experimental” semi-conductive materials. These connectors utilize the Faraday Cage principle to shunt electrostatic discharge events to the conductive enclosure on which the connector is mounted, thus never allowing the high voltage, high current discharge event to reside on any contacts. The ESD protected connectors have the same physical envelope as their standard counterparts, and do not require special mounting or terminating techniques. All of the contacts remain fully functional, and electrical characteristics such as capacitance are not affected.

• Connector envelope identical to unprotected design for most applications
• Exceeds protection requirements of IEC 801-2 and MIL-STD-1686:
• Response time – instantaneous (voltage and current are maximum values)
• Maximum ESD voltage – tested to ±26KV
• No capacitive loading
• Eliminates the need for discrete components (such as diodes) and max¬imizes PCB real estate
• Operating voltage of connectors not affected for most designs

For over 30 years Amphenol Printed Circuits (APC) capabilities are among the world’s broadest and most advanced, delivering consistent quality and high-bandwidth systems for mission critical applications. Proven engineering and manufacturing expertise eliminates printed circuit (flexible or rigid) design obstacles.

Amphenol Fiber Systems International(AFSI) offers the LowPro series of low-profile, fiber optic connectors. The FS115 LowPro has a height of 0.25" making
it ideal for edge-card connections and other applications that require minimal connector profiles. Using field-proven M29504/14 & /15 termini, this fiber optic connector has excellent optical performance with insertion losses of 0.35 dB (typical), 0.75 dB (maximum) and typical back reflection of -50 dB (single mode). 

The standard connector is offered with two fiber optic channels. Additional channels are available upon consultation with the factory. The FS115 LowPro is available in side mount, panel mount and inline configurations to support multiple mounting options. LowPro connectors are also offered in a wide variety of plating options and materials (aluminum, stainless steel, marine bronze and brass) to satisfy a wide range of harsh environments.

Features & Benefits

• Low-profile, fiber optic connector for applications requiring minimal height profiles
• Field-proven M29504/14 & /15 termini provides excellent optical performance
• Available in a wide variety of materials supporting various harsh environments
• Multiple configurations provide support for several mounting options

Applications

• Ground Systems
• Avionics
• Shipboard Systems

The CR-1 Harsh Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

• AEC Q200 Rev D Qualified
• Suitable for automotive, EGR, SCR, TMAP, OAT, HVAC & white goods applications
• Operation up to 190°C with excellent stability
• Small body diameter
• Fast response
• High thermal shock resistance
• Automotive/Aerospace fluids resistance
• Water immersion
• Flexible – coated leads can be formed
• Insulation resistance to 1kV d.c.
• Designed for accurate temperature measurement, control & compensation
• Tight tolerances on resistance and B value
• Available on bandolier to IEC 286-2RoHS 2011/65/EC / REACH compliant

The HD38999 family of connectors has 30% more contact density than the highest density Mil spec D38999 connectors of its size. For those users who need in increase the amount of contacts in their application, the HD38999 series allows them to do so without increasing the size of their connector.

• Goes from 9 to 187 contacts
• Qualified to MIL-DTL-38999 requirements
• Drop-in replacement for standard D38999 connectors
• Utilizes existing mil-qualified AS39029 size 23 contacts and D38999 insert materials
• Available in Filter, Hermetic and customized versions

HDAS is a high density monolithic connector. With its robust and simple design, high density, and high performance to extreme conditions, Featuring 6-tines starclip contact technology and a high-density staggered grid, HDAS is the right connector when installation cost and reliability must be considered.