Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
2M Connectors

The 2M Series is a superior and versatile connector designed and tested to mil-spec standards, comparable to MIL-DTL-38999. The 2M Series is designed for interconnect applications requiring high performance and reduced size and weight. This smaller, high density, lightweight connector far exceeds the competition in quality and performance levels. 2M is intermateable with Glenair's Mighty Mouse.

  • 70% weight savings compared to MIL-DTL-38999
  • 50% smaller than MIL-DTL-38999
  • Broad family with many styles and options
  • Designed for high-reliability aerospace & defense applications
  • For use in the harshest environments
38999 Stand-off

Stand-off receptacles for 38999 allow to fix directly the connector to the board with 3 or 4 screws. The square flange and jam nut receptacles are equipped with PC tail contacts and stand-off. This feature avoids the use of fastening device during the soldering process and ensures a perfect grounding between the shell of the connector and the ground of the board.

75 Ohms contacts

Dedicated to video application in harsh environment (military and aerospace applications), the 75 Ohms impedance matched contacts offer several advantages for reliable signal transmission in the world largest connector platform in the world (MIL-DTL-38999). Features and benefits:• Meet HD-TV protocols (3G-SDI) • Conform to AS39029/59 and /60 interface • Crimp and PCB version available • Custom contacts and easy cable adaptation further customer request.

Thermometrics Active In Car Temperature Sensor (AIT)

The Active In Car Temperature Sensor provides in-cabin temperature measurement for vehicles that have an automated temperature control system to improve temperature accuracy, cabin comfort and efficiency of the vehicle's temperature control system.

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Features:

  • Existing field proven design
  • Fast response
  • Accuracy maximizes driver/passenger comfort
  • Ultra-low noise, high air flow optimised system design
  • Coreless-type motor
  • Small size & flexible packaging facilitates installation & service
  • Low current consumption
  • Long-term stability – even in extreme humidity environments
  • Alternate RvT curves available
  • Available with/without humidity sensor
  • Electronics integrated into one assembly with the temperature sensor
  • Different geometries to meet package requirements
Media Converters

Amphenol Aerospace's High Speed Solutions offers a fully integrated standalone Analog-to-Digital Converter package.  Our integrated Analog-to-Digital Converters support input through High Frequency 50Ω MMCX RF type interconnects in a rugged MIL-DTL-38999 ultra-small form factor package. The analog inputs are single-ended and coupled to the latest in TI’s family of open architecture high speed ADC devices using a balun and AC coupling capacitor configuration to produce the broadband differential input required by the devices.

  • A-to-D conversion integrated with rugged MIL-DTL-38999 interconnects
  • State-of-the-art ADC devices from TI
  • Open system interface for easy integration with any FPGA
  • Eliminates expensive phase matched RF cables and saves system design cost
Circular Hermetic Connectors

Amphenol offers superior electrical performance plus the rugged design of a glass-sealed or epoxy-sealed connector. Amphenol glass-sealed hermetic connectors are available in a wide variety of Mil-Spec and custom configurations. Amphenol epoxy-sealed connectors are a lightweight alternative to glass-sealed hermetic connectors.

  • Hermetic: Leak rate of 1X10-7 cc He/sec or less
  • Epoxy-Sealed: Leak rate of 10X10-5 cc He/sec or less
  • Fused glass hermetic insert in stainless steel shell
  • Same epoxy as used on EMI filter connectors
  • Custom designs available
Thermometrics Coolant Temperature Sensor (CTS)

The Coolant Temperature Sensor (CTS) monitors the temperature of the coolant that is being pumped around the battery to cool the battery module of EV/PHEVs. If the battery module starts to overheat, the Coolant Temperature Sensor relays a signal to the Battery Management System (BMS). The BMS uses this information to prevent battery packs from any damage and maximize the performance.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • IP67 rated package
  • Compact IP67 design with integrated connector
  • Customizable to meet application installation needs
  • Variety of RvT curves and terminal plating available
  • Operating temperatures to 100°C
  • Fast response proven design
Copper-to-Fiber Media Converters

Amphenol Aerospace High Speed Solutions offers copper-to-fiber and fiber-to-copper media conversion with our hybrid integrated connectors. The family consists of protocol independent and Ethernet media conversion converters with more products being developed to meet our customers’ application needs.

  • Digital Media Converters
  • Opto-Electronic Contacts
  • Analog-to-Digital Converters
  • Ethernet Media Converters
Custom Hermetic Feedthroughs

In applications where the reliability and performance of electrical feedthroughs are critical, such as gas tight barriers or high-pressure differentials, hermetic feedthroughs are essential to maintain system integrity. Martec offers hermetic feedthroughs tailored specifically to your requirements, providing seals able to withstand pressures up to 60,000psi (4,100Bar), temperatures from cryogenic up to 1,000°C and for use in aggressive and hostile environments. Such seals can be manufactured using a range of materials such as Stainless Steel, Titanium, or Inconel.

  • Hermetic seal - Low leak rates
  • Pressure up to 60,000psi (400 Mpa)
  • Fire wall capabilities to 1000°C (1832°F)
  • Optimised Design
MIL-DTL-24308 D sub Connectors QPL

These are rack & panel connectors & MIL qualified listed in QPL. These connectors are subminature rack & Panel type polarized shell & having pin /socket contacts machined which provides high reliabilty & density for the connectors

D-Sub

The standard and high density D-Subminiature connectors are available in five shell sizes offering a wide choice of contact positions: 9, 15, 25, 37, and 50 in standard density and 15, 26, 44, 62, 78, and 104 positions in high density. We offer filtered, sealed and compliant tail designs as well as custom crimp type or other terminations

D38999 Fiber Optic / Hybrid Cable Assemblies

Amphenol Fiber Systems International (AFSI) designs and manufactures world class harsh environment fiber optic connectors and cable assemblies for the military and aerospace markets. Cable assemblies built with D38999 connectors, used in military, avionics, and industrial applications, are a cornerstone offering in our industry leading product line, along with TFOCA-II®, M28876 and expanded beam cable assemblies.

The D38999 circular connector series is designed for harsh environments, particularly those with wide temperature ranges and high mechanical vibrations. This electrical connector is adapted for fiber optics by using M29504/4 and /5 termini. These termini fit into any size 16 contact cavity. 

Precise alignment is critical to fiber optic connectors. The tightly toleranced fiber optic D38999 connectors ensure precise alignment with precision machined polarization keys and keyways which reduce radial misalignment. This precision yields superior optical performance when compared to standard D38999 connectors. Tight tolerance D38999 connectors also have a positive bottoming surface and conductive surface plating, assuring exceptional EMI/RFI performance.

All D38999 connectors feature a non-conductive insert making this a great connector choice when optical fibers and electrical wires must be used in the same connector. The D38999 series offers a wide range of shell sizes, backshells and insert patterns. Standard contacts and termini are available making any design simple and cost-effective. 

AFSI’s goal is to exceed customer requirements with every cable assembly. AFSI frequently assists customers in designing and building custom cable assemblies. Additionally, AFSI has over 15 years of experience in building to customer prints. Our highly skilled technicians are trained to a wide variety of industry standard procedures critical to manufacturing harsh environment fiber optic cable assemblies. All AFSI cable assemblies are manufactured by expert technicians in our state-of-the-art, AS9100 certified facility. We are proud to serve virtually every major defense company in the United States, the US Army, US Navy, US Marines, US Air Force, many international defense companies and international militaries as valued customers.

Features & Benefits

  • Rugged, multi-channel D38999 series III connectors
  • Vast and varied selection of shell sizes, contact arrangements and number of contacts
  • Incorporate proven M29504/4 & /5 termini
  • Available in aluminum, stainless or composite materials
  • Size 16 termini
  • Physical contact (butt joint) interface is guaranteed through a spring loaded terminus (fiber optic contact) design
Thermometrics Discharge Air Temperature Sensor (DAT)

The Discharge Air Temperature Sensor (DAT) is used to measure the temperature of the air that is emitted from a vehicle's air ducts. This temperature reading is fed back to the control module, and the system compares this temperature reading to what the occupant of the vehicle has the temperature set at on the air conditioning system. The control module calculates the temperature delta and automatically adjusts the HVAC system to minimize this temperature difference.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Small size & flexible
  • Integral connector
  • “Fir-Tree” or “Twist-Lock” for fast installation & easy service
  • The parts passed 2000 hour + submersion test
  • Alternate RvT curves available
  • Different geometries to meet package requirements
Discharge Air Temperature Sensor (DAT)

Thermometrics Discharge Air Temperature Sensor (DAT) is used to measure the temperature of the air that is emitted from a vehicle's air ducts. This temperature reading is fed back to the control module, and the system compares this temperature reading to what the occupant of the vehicle has the temperature set at on the air conditioning system. The control module calculates the temperature delta and automatically adjusts the HVAC system to minimize this temperature difference.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Small size & flexible
  • Integral connector
  • “Fir-Tree” or “Twist-Lock” for fast installation & easy service
  • The parts passed 2000 hour + submersion test
  • Alternate RvT curves available
  • Different geometries to meet package requirements

By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermometrics Dual Solar Sensor

The Dual Solar Sensor uses two photo diode cells to measure the intensity of the light that enters into the cabin of the vehicle. It then takes this information and feeds it back to the automatic temperature control (ATC) unit of the vehicle's air conditioning system. The air temperatures of the driver's side and passenger side are then automatically adjusted up or down depending upon the amount of light entering both sides of the vehicle. The sensor is mounted on the IP panel near the vehicle's front window.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • Fast response time
  • Easy to install
Thermometrics E-Stat Controller

The E-stat Controller is used in automobile air conditions to prevent the evaporator core from freezing. The NTC probe senses the temperature of the air as it passes through the evaporator core. An electronic control circuit interprets the change in resistance of the thermistor to indicate when the evaporator core is near freezing. The control circuit then provides an output to disengage the compressor clutch, allowing the evaporator core to warm. When the air temperature of the evaporator core warms up, the circuit reactivates the clutch allowing the evaporator to cool.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High sensitivity
  • High reliability
  • Wide application voltage
  • Customizable range of drive current outputs and unlimited packaging designs
Electro-Mechanical Integration

DESCRIPTION

At Amphenol Borisch Technologies we understand that building complex assemblies requires a robust quality system, strong engineering support and world class operators. Amphenol will provide you with a dedicated Program Manager that has the resources and expertise to ensure you will receive excellent service.

FEATURES AND BENEFITS

  • Program Management
  • Design and Launch Support
  • Obsolescence Management
  • Supply Chain Expertise
  • Vertically Integrated Manufacturing
  • Second-to-none Test Engineering
Electronic Assemblies

DESCRIPTION

At Amphenol Borisch Technologies we understand that high reliability electronics requires state-of-the art equipment, experienced and passionate people, and rigorous process validation. We work closely with our customers during the New Product Introduction (NPI) stage to ensure that products meet or exceeds all requirements and expectations right from the very start of the project.

FEATURES AND BENEFITS

  • Automated Select Solder, Press-fit and Hand Solder for Through Hole
  • Single & Double-sided BGA’s and uBGAs
  • High Density Packages (0201)
  • Chip on Board
  • Lead-free
  • Conformal Coat: UR, UL and Parylene
MIl-Spec Circular Filter Connectors

Amphenol's EMI/EMP Protection Connectors offer the versatility of standard connectors with EMI/EMP protection for sensitive circuits. Internal housing of the EMI/EMP devices eliminates costly and bulky exterior discrete protection devices. Virtually all major MIL-Spec circulars can be incorporated with filter devices.

Evaporator Core Temperature Sensor

Thermometrics Evaporator Core Temperature Sensor measures evaporator core temperature in a vehicle's HVAC system so that it doesn’t freeze over, preventing a costly repair. The ultra fast response time aids in the HVAC system efficiency by enabling the evaporator core to operate closer to 0°C without the risk of a freeze over condition.

Features:

  • Existing field-proven design
  • Probe construction protects the thermistor from moisture
  • Fast response time using geometry and materials optimized for maximum heat transfer
  • Small size & flexible packaging facilitates installation & service
  • Snap-fit housing eliminates wiring insulation damage and provides strain relief
  • Long-term stability – proprietary silver migration controls
  • Salt fog resistant
  • Alternate RvT curves available
  • Different geometries to meet package requirements available

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Evaporator Temperature Sensor

Thermometrics Evaporator Temperature Sensor is used to measure evaporator core temperature. An evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and robust thermistor to measure its temperature to prevent the core from freezing. A frozen core could result in costly damage to the evaporator core and diminished HVAC operation, so that the cabin temperature can no longer be controlled.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Small size & flexible packaging
  • Snap-fit housing eliminates wiring insulation damage
  • Easy twist-to-lock design for easy installation and service
  • Integral connector
  • The parts passed 2000 hour + submersion test
  • Pigtail and fin-type versions available
  • Alternate RvT curves available
  • Different geometries to meet package requirements

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Exhaust Gas High Temperature Sensor

Thermometrics Exhaust Gas High Temperature Sensor operates over a temperature range from -40°C to 850°C. It monitors the temperature before and after SCR system in vehicle engines as part of the engine control strategy. It is designed for fast response, optimized for thermal dissipation and suitable for high vibration and corrosive environments.

Features:

  • 1000°C PT200 RTD element
  • Survives excursions to 1000°C
  • Highly resistant to corrosive exhaust gases
  • Long-term stability
  • Extended life from moisture-proof design
  • Design optimized for heat transfer
  • High 3 % accuracy
  • Flexible Pigtail Connector
  • Customizable hex dimensions and thread type
  • Alternate 1% accuracy RTD element available

By Amphenol Advanced Sensors | Thermometrics, Inc.

Fiber-to-Antenna Connectors

Borne from the foundation of D38999 mil-spec harsh environment connectors, the FTTA interconnect solution combines standard fiber optic LC components and copper contacts in a rugged, affordable package.  The FTTA series is highly configurable to support a wide range of industrial applications where fiber and copper connectivity are required in a single connector for rapid deployment and easy maintainability.

  • Highly Configurable rugged plug and receptacle combination with: Two Duplex LCs (four fiber optic connections), Two Size 12 power pins
  • Options for shell material: Composite, Aluminum, Stainless Steel
  • All standard platings: Nickel, Olive Drab Cadmium, Durmalon, Black Zinc Nickel
  • Shell styles: Jam Nut, Wall Mount, Box Mount Receptacle
Fixed Length Cable Assemblies

Amphenol RF offers a full line of pre-assembled, fixed-length cable assemblies. Fixed length assemblies are offered in all of our most popular connector series and are available in over 1400 standard configurations and lengths.

Fuel Temperature Sensor (FTS)

Thermometrics Fuel Temperature Sensor (FTS) is designed to measure the temperature of a vehicle's fuel and relay this information to the engine control unit, so that it can optimize the air-to-fuel mix ratio, depending on what the fuel temperature is with respect to the intake air temperature. The sensor enables the vehicle to run at maximum efficiency based on temperature. The more optimized the combustion process is, the less pollutants that are emitted via the exhaust system.

Features:

  • Integral sealed connector
  • Gold plated terminals
  • Use of crimp & weld terminals allows for various lengths
  • PS plastic connector for higher temperatures
  • O-ring and shell materials compatible with bio-diesel applications and meet new cleanliness requirements
  • Increased vibration resistance and durability
  • Field-proven design
  • Pigtail versions also available
  • Alternate RvT curves available
  • Different geometries to meet package requirements
  • Other resistance and beta values available

By Amphenol Advanced Sensors | Thermometrics, Inc.

GE-1856 - Intake Air Temperature Sensor (IAT) | Thermometrics

Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Easy installation and service
  • Integral sealed connector
  • Alternate RvT curves available
  • Other resistance and beta values available
Thermometrics Harsh Environment Chip Thermistor CR-1

The CR-1 Harsh Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • AEC Q200 Rev D Qualified
  • Suitable for automotive, EGR, SCR, TMAP, OAT, HVAC & white goods applications
  • Operation up to 190°C with excellent stability
  • Small body diameter
  • Fast response
  • High thermal shock resistance
  • Automotive/Aerospace fluids resistance
  • Water immersion
  • Flexible – coated leads can be formed
  • Insulation resistance to 1kV d.c.
  • Designed for accurate temperature measurement, control & compensation
  • Tight tolerances on resistance and B value
  • Available on bandolier to IEC 286-2RoHS 2011/65/EC / REACH compliant
NPR-101 Harsh Media Pressure Sensor

The NovaSensor NPR-101 Harsh Media Pressure Sensor is a silicon-based MEMS device using “Backside Absolute Pressure” technology designed for harsh media exposure, which eliminates the direct contact of the sensing circuitry with the applied media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics included.

 

Features

  • Harsh media compatibility
  • High level output
  • Small package

 

By Amphenol Advanced Sensors | NovaSensor 

 

HD38999 Connectors

The HD38999 family of connectors has 30% more contact density than the highest density Mil spec D38999 connectors of its size. For those users who need in increase the amount of contacts in their application, the HD38999 series allows them to do so without increasing the size of their connector.

  • Goes from 9 to 187 contacts
  • Qualified to MIL-DTL-38999 requirements
  • Drop-in replacement for standard D38999 connectors
  • Utilizes existing mil-qualified AS39029 size 23 contacts and D38999 insert materials
  • Available in Filter, Hermetic and customized versions
HDAS

HDAS is a high density monolithic connector. With its robust and simple design, high density, and high performance to extreme conditions, Featuring 6-tines starclip contact technology and a high-density staggered grid, HDAS is the right connector when installation cost and reliability must be considered.