Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
1750 series - Junction Modules

Amphenol Air LB France 1750 series consists of Quick junction modules for signal and low current distribution, where sealing (IP66 / IP68 and IP69K), space and weight-saving are prime requirements. Specifically suited for wiring optimization, then offering weight and cost savings, these track-mounted distribution modules (on metallic or composite track) are available from 8 contacts size 12 up to 36 contacts size 22 in different contact configurations. They also come in hybrid or ground versions, as well as PCB or component carrier versions. Fully REACH / RoHS compliant and conform to ABD0031 and FAR 25853 (Fire, Smoke and Toxicity).

 

Main features :

• Military & Commercial Aerospace specification
• Modules are fitted with male crimp contacts
• Derived from EN3708 and NSA937901 standards
• Compact design
• Overmold Technology offering excellent sealing performances
• Suited to save cable linear meters, then cost and weight
• Versatility of mixing on metallic or composite tracks
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

1765 Component Carrier Module

Amphenol Air LB France 1765 series is derived from the 1750 series. They consists of components carrier versions suited for diodes, resistors, fuses etc. They offer a perfect sealing (IP66 / IP68 and IP69K), space and weight-saving. Mounting on composite or metallic tracks.

 

Main features :

• Military & Commercial Aerospace specification
• Compact design
• Overmold Technology offering excellent sealing performances
• Versatility of mixing on metallic or composite tracks with 1750 series modules

2M Connectors

The 2M Series is a superior and versatile connector designed and tested to mil-spec standards, comparable to MIL-DTL-38999. The 2M Series is designed for interconnect applications requiring high performance and reduced size and weight. This smaller, high density, lightweight connector far exceeds the competition in quality and performance levels. 2M is intermateable with Glenair's Mighty Mouse.

  • 70% weight savings compared to MIL-DTL-38999
  • 50% smaller than MIL-DTL-38999
  • Broad family with many styles and options
  • Designed for high-reliability aerospace & defense applications
  • For use in the harshest environments
Waterproof Breakaway Connectors

Amphenol Nexus Technologies is the leader in watertight, breakaway connectors designed to meet severe environmental conditions. Our connectors, which are watertight in up to 6 feet of water, have molded-on wiping-action contacts that provide a self-cleaning feature and eliminate issues with pin/socket open contacts. The 7-Pin and 10-Pin connectors are designed for multiple cable diameters, are available in shielded versions, and can include either solder-type contacts of insulation-piercing contacts, which are field replaceable. Many of the 7- and 10-pin Connectors also come in a miniature versions that is 50% smaller than the standard connector. All standard connector options are also available in the miniaturized versions.

  • Push-pull breakaway/Quick-disconnect
  • Up to 5,000 mating cycles with standard versions (3,000 cycles with miniaturized versions)
  • 2 amps max per contact
  • Panel-mount plugs and receptacles available
R58 (M83733 Equivalent)

The Amphenol R58 series are high-performance environment-resistant, rectangular connectors designed to be compatible with allMIL-DTL-83733 connectors and Amphenol Canada is M83733 equivalent and the only qualified supplier for the Mil Spec JN1122.
This connector is well suited for hostile military and commercial avionics environments where shielding effectiveness and corrosion resistance is mandatory. This series is available both filtered and non-filtered. Filtering is achieved using Amphenol Canada stress isolated capacitor technology. Applications include Blind mate, cable to cable and cable to box connections in Military avionics, targeting PODS and wing pylons.

FEATURES & BENEFITS
• Harsh environmental applications
• Shield and corrosion resistance
• Rear release crimp snap-in contacts
• Field proven assembly allow contacts to be inserted and extracted from the rear
• Contacts are qualified to Military Specifications
The connectors are available in two shell sizes with a variety of hard and spring mounting configurations.
A broad range of contact arrangements is available from custom to 185 standard contacts.
The standard contacts are available in sizes 12, 16, 20 and 22D in crimp and PCB. Fiber optic contacts are also available.
Shells are machined aluminum alloy with several finish options, including Olive Drab Chromate over Cadmium, and Electroless Nickel.
Insulators are a high grade, plastic to MIL-M-14. Silicone rubber is used for grommets, inter-facial seals and peripheral seals.
Filtered versions are also available (458 Series).

Thermometrics Active In Car Temperature Sensor (AIT)

The Active In Car Temperature Sensor provides in-cabin temperature measurement for vehicles that have an automated temperature control system to improve temperature accuracy, cabin comfort and efficiency of the vehicle's temperature control system.

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Features:

  • Existing field proven design
  • Fast response
  • Accuracy maximizes driver/passenger comfort
  • Ultra-low noise, high air flow optimised system design
  • Coreless-type motor
  • Small size & flexible packaging facilitates installation & service
  • Low current consumption
  • Long-term stability – even in extreme humidity environments
  • Alternate RvT curves available
  • Available with/without humidity sensor
  • Electronics integrated into one assembly with the temperature sensor
  • Different geometries to meet package requirements
ARINC 801 Fiber Optic Termini

Amphenol Fiber Systems International (AFSI) offers a fully-compliant ARINC 801 fiber optic terminus for aerospace and military applications. The AFSI ARINC 801 uses a standard 1.25 mm ferrule and sleeve and can be terminated with standard LC termination procedures. The terminus can be inserted, or removed, from the connector with a standard size 16 contact removal tool. The terminus is available in both multimode and single mode versions. The fiber optic contact provides low insertion loss (0.3 dB max, multimode) and backreflection (-55 dB, APC). In addition to the standard PC end-face option, AFSI’s ARINC 801 is offered with an APC end-face for those applications requiring reduced backreflection. 

The terminus is highly flexible and is used primarily in ARINC 801, 600, 404, 781 and EPXA/B multi-channel connectors. The fiber optic contact is offered in with a pull-proof feature (allows the use of the contact in a connector without a strain-relief backshell) configuration, for both tight and loose tube cable.

Features and Benefits

  • Flexible design for use in multiple connector types
  • Genderless terminus allows one contact type
  • Standard 1.25 mm LC ferrule interface allows the use of standard termination procedures and widely available tools
  • Available in single mode and multimode
  • PC, UPC or APC polishes available
  • Pull-proof feature allows the use of the terminus in a connector without a backshell

Applications

  • Airframe In-Flight Entertainment Systems
  • Avionics
  • Heads-Up Displays
  • On-Board Communications
  • Works with tight or loose structure cable
Circular Hermetic Connectors

Amphenol offers superior electrical performance plus the rugged design of a glass-sealed or epoxy-sealed connector. Amphenol glass-sealed hermetic connectors are available in a wide variety of Mil-Spec and custom configurations. Amphenol epoxy-sealed connectors are a lightweight alternative to glass-sealed hermetic connectors.

  • Hermetic: Leak rate of 1X10-7 cc He/sec or less
  • Epoxy-Sealed: Leak rate of 10X10-5 cc He/sec or less
  • Fused glass hermetic insert in stainless steel shell
  • Same epoxy as used on EMI filter connectors
  • Custom designs available
Thermometrics Coolant Temperature Sensor (CTS)

The Coolant Temperature Sensor (CTS) monitors the temperature of the coolant that is being pumped around the battery to cool the battery module of EV/PHEVs. If the battery module starts to overheat, the Coolant Temperature Sensor relays a signal to the Battery Management System (BMS). The BMS uses this information to prevent battery packs from any damage and maximize the performance.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • IP67 rated package
  • Compact IP67 design with integrated connector
  • Customizable to meet application installation needs
  • Variety of RvT curves and terminal plating available
  • Operating temperatures to 100°C
  • Fast response proven design
D-Sub

The standard and high density D-Subminiature connectors are available in five shell sizes offering a wide choice of contact positions: 9, 15, 25, 37, and 50 in standard density and 15, 26, 44, 62, 78, and 104 positions in high density. We offer filtered, sealed and compliant tail designs as well as custom crimp type or other terminations

D38999 Fiber Optic / Hybrid Cable Assemblies

Amphenol Fiber Systems International (AFSI) designs and manufactures world class harsh environment fiber optic connectors and cable assemblies for the military and aerospace markets. Cable assemblies built with D38999 connectors, used in military, avionics, and industrial applications, are a cornerstone offering in our industry leading product line, along with TFOCA-II®, M28876 and expanded beam cable assemblies.

The D38999 circular connector series is designed for harsh environments, particularly those with wide temperature ranges and high mechanical vibrations. This electrical connector is adapted for fiber optics by using M29504/4 and /5 termini. These termini fit into any size 16 contact cavity. 

Precise alignment is critical to fiber optic connectors. The tightly toleranced fiber optic D38999 connectors ensure precise alignment with precision machined polarization keys and keyways which reduce radial misalignment. This precision yields superior optical performance when compared to standard D38999 connectors. Tight tolerance D38999 connectors also have a positive bottoming surface and conductive surface plating, assuring exceptional EMI/RFI performance.

All D38999 connectors feature a non-conductive insert making this a great connector choice when optical fibers and electrical wires must be used in the same connector. The D38999 series offers a wide range of shell sizes, backshells and insert patterns. Standard contacts and termini are available making any design simple and cost-effective. 

AFSI’s goal is to exceed customer requirements with every cable assembly. AFSI frequently assists customers in designing and building custom cable assemblies. Additionally, AFSI has over 15 years of experience in building to customer prints. Our highly skilled technicians are trained to a wide variety of industry standard procedures critical to manufacturing harsh environment fiber optic cable assemblies. All AFSI cable assemblies are manufactured by expert technicians in our state-of-the-art, AS9100 certified facility. We are proud to serve virtually every major defense company in the United States, the US Army, US Navy, US Marines, US Air Force, many international defense companies and international militaries as valued customers.

Features & Benefits

  • Rugged, multi-channel D38999 series III connectors
  • Vast and varied selection of shell sizes, contact arrangements and number of contacts
  • Incorporate proven M29504/4 & /5 termini
  • Available in aluminum, stainless or composite materials
  • Size 16 termini
  • Physical contact (butt joint) interface is guaranteed through a spring loaded terminus (fiber optic contact) design
Discharge Air Temperature Sensor (DAT)

Thermometrics Discharge Air Temperature Sensor (DAT) is used to measure the temperature of the air that is emitted from a vehicle's air ducts. This temperature reading is fed back to the control module, and the system compares this temperature reading to what the occupant of the vehicle has the temperature set at on the air conditioning system. The control module calculates the temperature delta and automatically adjusts the HVAC system to minimize this temperature difference.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Small size & flexible
  • Integral connector
  • “Fir-Tree” or “Twist-Lock” for fast installation & easy service
  • The parts passed 2000 hour + submersion test
  • Alternate RvT curves available
  • Different geometries to meet package requirements

By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermometrics Discharge Air Temperature Sensor (DAT)

The Discharge Air Temperature Sensor (DAT) is used to measure the temperature of the air that is emitted from a vehicle's air ducts. This temperature reading is fed back to the control module, and the system compares this temperature reading to what the occupant of the vehicle has the temperature set at on the air conditioning system. The control module calculates the temperature delta and automatically adjusts the HVAC system to minimize this temperature difference.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Small size & flexible
  • Integral connector
  • “Fir-Tree” or “Twist-Lock” for fast installation & easy service
  • The parts passed 2000 hour + submersion test
  • Alternate RvT curves available
  • Different geometries to meet package requirements
Thermometrics Dual Solar Sensor

The Dual Solar Sensor uses two photo diode cells to measure the intensity of the light that enters into the cabin of the vehicle. It then takes this information and feeds it back to the automatic temperature control (ATC) unit of the vehicle's air conditioning system. The air temperatures of the driver's side and passenger side are then automatically adjusted up or down depending upon the amount of light entering both sides of the vehicle. The sensor is mounted on the IP panel near the vehicle's front window.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • Fast response time
  • Easy to install
Dualok

Dualok is an enhanced anti-decoupling mechanism that can be used on virtually any cylindrical plug connector and backshell. The Dualok Interconnect System greatly improves electrical performance in harsh environments while providing a size and weight savings when compared to standard connectors in the same class. Dualok technology is applied to the plug connector and backshell only and will mate with standard receptacles. 

  • Better shell-to-shell conductivity
  • Assures EMI protection at high frequencies
  • Extreme vibration capabilities at wide temperature range
  • Enhanced corrosion protection with composite materials
  • Lightweight, hybrid composite/metal design
  • Smaller footprint/space savings
Thermometrics E-Stat Controller

The E-stat Controller is used in automobile air conditions to prevent the evaporator core from freezing. The NTC probe senses the temperature of the air as it passes through the evaporator core. An electronic control circuit interprets the change in resistance of the thermistor to indicate when the evaporator core is near freezing. The control circuit then provides an output to disengage the compressor clutch, allowing the evaporator core to warm. When the air temperature of the evaporator core warms up, the circuit reactivates the clutch allowing the evaporator to cool.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High sensitivity
  • High reliability
  • Wide application voltage
  • Customizable range of drive current outputs and unlimited packaging designs
Electronic Splices

Single and Dual Splices and Electronic Splices are designed to provide a quick and efficient solution to customer wiring requirements. 

Single and Dual Wire Splices meet MIL-T-81714/11 & 12 requirements and are highly resistant to temperature and fluids.

TJSE Electronic Modules can be supplied with a wide variety of diodes, resistors, capacitors, and fuses within the splice itself. TJSE Electronic Splices meet the electronic parameters of MIL-81714/24 and allow customers to incorporate system modifications into a wire bundle, avoiding changes in panels or boards.

Amphenol Pcd’s Electronic Terminal Junction Splices are available with a variety of components and in a wide range of configurations. Components available include but are not limited to diodes, resistors, fuses, capacitors, thyristors, and inductors, and are also available with multiple components within one module. The following are currently available Electronic Terminal Junction Splices, although there are new configurations produced regularly and customized components are also available.

MIl-Spec Circular Filter Connectors

Amphenol's EMI/EMP Protection Connectors offer the versatility of standard connectors with EMI/EMP protection for sensitive circuits. Internal housing of the EMI/EMP devices eliminates costly and bulky exterior discrete protection devices. Virtually all major MIL-Spec circulars can be incorporated with filter devices.

EN4165 / SIM Connectors Series 2

The Amphenol Air LB France EN4165 / SIM connectors (Modular Interconnection System) is a modular, multifunctional rectangular connector. It consists of shells and modules, which together create an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Its flexibility and simplicity during design and operation, makes SIM a competitive alternative for a wide range of applications. They come in metallic version for robust applications, or in composite version for weight saving applications. Also available in custom design plates and Rack & Panel versions.

 

Main features :

• EN4165 qualified
• Military & Commercial Aerospace specification for rectangular modular connectors
• Space efficient & modular design
• SIM modules in overmold Technology
• Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
• Available in standard crimp contacts (#8 to #23) and PCB contacts
• Available in standard Mono, 2 & 4 bay, or custom configurations
• EN4165 specification is comparable to U.S. MIL-STD-810 in performance
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

EN4165 / SIM custom plates

Amphenol Air LB France EN4165 / SIM plates are derived from EN4165 standard connectors. It consists of customer shells fitted with the whole range of EN4165 standard modules, together creating an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Customs plates can easily be intergrated at the rear of electronic boxes, or fully replace boxes themselves. EN4165 / SIM plates are also suitable to connectorize boxes or structure parts, aiming to save parts and then simplify the supply chain. 

 

Main features :

• Designed and qualified according to EN4165 standard
• Scoop-proof and blind mating shells available
• SIM modules in overmold Technology
• Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
• Custom design
• Connectorization of boxes or structures aiming to save parts and simplify the supply chain

EN4165 / SIM Monomodule Connectors

The Amphenol Air LB France EN4165 / SIM Monomodule Connectors (ARINC 809) are a mono modular, push-pull connectors that are ideal for In-Flight Entertainment Systems, Cabin Service Systems, and other interconnect system requirements. Especially suited for applications where shielding is mandatory.

 

Main features :

• EN4165 qualified
• Military & Commercial Aerospace specification for rectangular modular connectors
• Fully qualified and compliant with ARINC 809 specifications
• Lightweight and robust thermoplastic; metalized for shielding
• More than 20 different inserts to choose from including butt joint and expanded beam optical contacts, MT ferrule, High speed..
• SIM modules in overmold Technology
• Fixing accessories, multiple colors, flight caps and 3-pin quick install versions are also available
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

EN4165 / SIM splice

This modular composite splice provides a reliable and simple connection between two EN4165 / SIM modules. Derived from the Amphenol Air LB France EN4165 / SIM connectors series 2, this splice is available with or without cable clamp, and/or flange. It can be fixed on/under a structure or Feed-through and can be fitted with the whole range of EN4165 / SIM modules. In-Seat Modular & Flexible Wiring; Quick install interconnect, splicing.

 

Main features :

• Military & Commercial Aerospace specification for rectangular modular connectors
• Space efficient & modular design
• Compatible with the whole range of EN4165 / SIM modules
• SIM modules in overmold Technology
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

Evaporator Core Temperature Sensor

Thermometrics Evaporator Core Temperature Sensor measures evaporator core temperature in a vehicle's HVAC system so that it doesn’t freeze over, preventing a costly repair. The ultra fast response time aids in the HVAC system efficiency by enabling the evaporator core to operate closer to 0°C without the risk of a freeze over condition.

Features:

  • Existing field-proven design
  • Probe construction protects the thermistor from moisture
  • Fast response time using geometry and materials optimized for maximum heat transfer
  • Small size & flexible packaging facilitates installation & service
  • Snap-fit housing eliminates wiring insulation damage and provides strain relief
  • Long-term stability – proprietary silver migration controls
  • Salt fog resistant
  • Alternate RvT curves available
  • Different geometries to meet package requirements available

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Evaporator Temperature Sensor

Thermometrics Evaporator Temperature Sensor is used to measure evaporator core temperature. An evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and robust thermistor to measure its temperature to prevent the core from freezing. A frozen core could result in costly damage to the evaporator core and diminished HVAC operation, so that the cabin temperature can no longer be controlled.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Small size & flexible packaging
  • Snap-fit housing eliminates wiring insulation damage
  • Easy twist-to-lock design for easy installation and service
  • Integral connector
  • The parts passed 2000 hour + submersion test
  • Pigtail and fin-type versions available
  • Alternate RvT curves available
  • Different geometries to meet package requirements

By Amphenol Advanced Sensors | Thermometrics, Inc.

 

Exhaust Gas High Temperature Sensor

Thermometrics Exhaust Gas High Temperature Sensor operates over a temperature range from -40°C to 850°C. It monitors the temperature before and after SCR system in vehicle engines as part of the engine control strategy. It is designed for fast response, optimized for thermal dissipation and suitable for high vibration and corrosive environments.

Features:

  • 1000°C PT200 RTD element
  • Survives excursions to 1000°C
  • Highly resistant to corrosive exhaust gases
  • Long-term stability
  • Extended life from moisture-proof design
  • Design optimized for heat transfer
  • High 3 % accuracy
  • Flexible Pigtail Connector
  • Customizable hex dimensions and thread type
  • Alternate 1% accuracy RTD element available

By Amphenol Advanced Sensors | Thermometrics, Inc.

Rigid and Double-Sided Flex Circuits

For over 30 years Amphenol Printed Circuits (APC) capabilities are among the world’s broadest and most advanced, delivering consistent quality and high-bandwidth systems for mission critical applications. Proven engineering and manufacturing expertise eliminates printed circuit (flexible or rigid) design obstacles.

Fuel Temperature Sensor (FTS)

Thermometrics Fuel Temperature Sensor (FTS) is designed to measure the temperature of a vehicle's fuel and relay this information to the engine control unit, so that it can optimize the air-to-fuel mix ratio, depending on what the fuel temperature is with respect to the intake air temperature. The sensor enables the vehicle to run at maximum efficiency based on temperature. The more optimized the combustion process is, the less pollutants that are emitted via the exhaust system.

Features:

  • Integral sealed connector
  • Gold plated terminals
  • Use of crimp & weld terminals allows for various lengths
  • PS plastic connector for higher temperatures
  • O-ring and shell materials compatible with bio-diesel applications and meet new cleanliness requirements
  • Increased vibration resistance and durability
  • Field-proven design
  • Pigtail versions also available
  • Alternate RvT curves available
  • Different geometries to meet package requirements
  • Other resistance and beta values available

By Amphenol Advanced Sensors | Thermometrics, Inc.

GE-1856 - Intake Air Temperature Sensor (IAT) | Thermometrics

Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • High accuracy and long term stability
  • Fast response time
  • Easy installation and service
  • Integral sealed connector
  • Alternate RvT curves available
  • Other resistance and beta values available
Thermometrics Harsh Environment Chip Thermistor CR-1

The CR-1 Harsh Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

  • AEC Q200 Rev D Qualified
  • Suitable for automotive, EGR, SCR, TMAP, OAT, HVAC & white goods applications
  • Operation up to 190°C with excellent stability
  • Small body diameter
  • Fast response
  • High thermal shock resistance
  • Automotive/Aerospace fluids resistance
  • Water immersion
  • Flexible – coated leads can be formed
  • Insulation resistance to 1kV d.c.
  • Designed for accurate temperature measurement, control & compensation
  • Tight tolerances on resistance and B value
  • Available on bandolier to IEC 286-2RoHS 2011/65/EC / REACH compliant
NPR-101 Harsh Media Pressure Sensor

The NovaSensor NPR-101 Harsh Media Pressure Sensor is a silicon-based MEMS device using “Backside Absolute Pressure” technology designed for harsh media exposure, which eliminates the direct contact of the sensing circuitry with the applied media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics included.

 

Features

  • Harsh media compatibility
  • High level output
  • Small package

 

By Amphenol Advanced Sensors | NovaSensor