Product Finder

Search for Amphenol products by Amphenol market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business.

Reset
R58 (M83733 Equivalent)

The Amphenol R58 series are high-performance environment-resistant, rectangular connectors designed to be compatible with allMIL-DTL-83733 connectors and Amphenol Canada is M83733 equivalent and the only qualified supplier for the Mil Spec JN1122.
This connector is well suited for hostile military and commercial avionics environments where shielding effectiveness and corrosion resistance is mandatory. This series is available both filtered and non-filtered. Filtering is achieved using Amphenol Canada stress isolated capacitor technology. Applications include Blind mate, cable to cable and cable to box connections in Military avionics, targeting PODS and wing pylons.

FEATURES & BENEFITS
• Harsh environmental applications
• Shield and corrosion resistance
• Rear release crimp snap-in contacts
• Field proven assembly allow contacts to be inserted and extracted from the rear
• Contacts are qualified to Military Specifications
The connectors are available in two shell sizes with a variety of hard and spring mounting configurations.
A broad range of contact arrangements is available from custom to 185 standard contacts.
The standard contacts are available in sizes 12, 16, 20 and 22D in crimp and PCB. Fiber optic contacts are also available.
Shells are machined aluminum alloy with several finish options, including Olive Drab Chromate over Cadmium, and Electroless Nickel.
Insulators are a high grade, plastic to MIL-M-14. Silicone rubber is used for grommets, inter-facial seals and peripheral seals.
Filtered versions are also available (458 Series).

Aerostructure Cable Assemblies

Build to specification and/or build to print requirements can be addressed from Digital Mock-Up data (DMU) to form boards of electrical harnesses in all aerostructure applications. This will include wiring diagrams, product change management, configuration management and electrical testing. An EWIS responsibility (Electrical Wiring Interconnect Systems) can be proposed to customers, including aircraft certification support with the supply of EASA form 1, integration into the aircraft when requested, obsolescence management, maintenance and technical assistance over the total program flying period.

ARINC 600

Amphenol Canada ARINC products are rack & panel, blind-mate, rugged connectors designed for commercial and military avionics systems.
These connectors are available in standard and custom configurations with a mix of contact types including: power, signal, RF, and Fiber Optics.
Customized ARINC products can fit into any size or shape of electronics box and custom integrated panel designs are also available
Integrated EMI and/or EMP filtering offers weight and space savings.
 

ARINC 801 Fiber Optic Termini

Amphenol Fiber Systems International (AFSI) offers a fully-compliant ARINC 801 fiber optic terminus for aerospace and military applications. The AFSI ARINC 801 uses a standard 1.25 mm ferrule and sleeve and can be terminated with standard LC termination procedures. The terminus can be inserted, or removed, from the connector with a standard size 16 contact removal tool. The terminus is available in both multimode and single mode versions. The fiber optic contact provides low insertion loss (0.3 dB max, multimode) and backreflection (-55 dB, APC). In addition to the standard PC end-face option, AFSI’s ARINC 801 is offered with an APC end-face for those applications requiring reduced backreflection. 

The terminus is highly flexible and is used primarily in ARINC 801, 600, 404, 781 and EPXA/B multi-channel connectors. The fiber optic contact is offered in with a pull-proof feature (allows the use of the contact in a connector without a strain-relief backshell) configuration, for both tight and loose tube cable.

Features and Benefits

  • Flexible design for use in multiple connector types
  • Genderless terminus allows one contact type
  • Standard 1.25 mm LC ferrule interface allows the use of standard termination procedures and widely available tools
  • Available in single mode and multimode
  • PC, UPC or APC polishes available
  • Pull-proof feature allows the use of the terminus in a connector without a backshell

Applications

  • Airframe In-Flight Entertainment Systems
  • Avionics
  • Heads-Up Displays
  • On-Board Communications
  • Works with tight or loose structure cable
P1905 Backside Absolute Pressure Sensor Die

The NovaSensor P1905 Backside Absolute Pressure Sensor Die is a piezoresistive sensor die designed for absolute pressure measurements in aggressive (harsh) media. The die has a reference vacuum chamber formed by hermetic low-stress bonding of silicon cap to the top side of device wafer. By applying pressure from backside of the die, P1905sensor die eliminates the direct contact of sensor circuitry on top side with the applied media, which allows the P1905 die to measure pressure in aggressive liquids and gases. With NovaSensor’s SenStable® process, P1905 die features excellent long-term stability and repeatability (< 0.1% / year typ.).

 

Features

  • Harsh media compatible
  • Highly reliable, solid state silicon absolute pressure sensor die pressurized from cavity side
  • Recommended pressure ranges:
    0…100 PSIA to 0…300 PSIA
  • Die dimensions (L x W x H):
    1.93 mm x 1.93 mm x 1.64 mm
  • Bond pads all on same side for easy application packaging
  • Other pressure ranges available

 

By Amphenol Advanced Sensors | NovaSensor 

 

D38999 Fiber Optic / Hybrid Cable Assemblies

Amphenol Fiber Systems International (AFSI) designs and manufactures world class harsh environment fiber optic connectors and cable assemblies for the military and aerospace markets. Cable assemblies built with D38999 connectors, used in military, avionics, and industrial applications, are a cornerstone offering in our industry leading product line, along with TFOCA-II®, M28876 and expanded beam cable assemblies.

The D38999 circular connector series is designed for harsh environments, particularly those with wide temperature ranges and high mechanical vibrations. This electrical connector is adapted for fiber optics by using M29504/4 and /5 termini. These termini fit into any size 16 contact cavity. 

Precise alignment is critical to fiber optic connectors. The tightly toleranced fiber optic D38999 connectors ensure precise alignment with precision machined polarization keys and keyways which reduce radial misalignment. This precision yields superior optical performance when compared to standard D38999 connectors. Tight tolerance D38999 connectors also have a positive bottoming surface and conductive surface plating, assuring exceptional EMI/RFI performance.

All D38999 connectors feature a non-conductive insert making this a great connector choice when optical fibers and electrical wires must be used in the same connector. The D38999 series offers a wide range of shell sizes, backshells and insert patterns. Standard contacts and termini are available making any design simple and cost-effective. 

AFSI’s goal is to exceed customer requirements with every cable assembly. AFSI frequently assists customers in designing and building custom cable assemblies. Additionally, AFSI has over 15 years of experience in building to customer prints. Our highly skilled technicians are trained to a wide variety of industry standard procedures critical to manufacturing harsh environment fiber optic cable assemblies. All AFSI cable assemblies are manufactured by expert technicians in our state-of-the-art, AS9100 certified facility. We are proud to serve virtually every major defense company in the United States, the US Army, US Navy, US Marines, US Air Force, many international defense companies and international militaries as valued customers.

Features & Benefits

  • Rugged, multi-channel D38999 series III connectors
  • Vast and varied selection of shell sizes, contact arrangements and number of contacts
  • Incorporate proven M29504/4 & /5 termini
  • Available in aluminum, stainless or composite materials
  • Size 16 termini
  • Physical contact (butt joint) interface is guaranteed through a spring loaded terminus (fiber optic contact) design
EN4165 / SIM Connectors Series 2

The Amphenol Air LB France EN4165 / SIM connectors (Modular Interconnection System) is a modular, multifunctional rectangular connector. It consists of shells and modules, which together create an integrated solution, supporting advanced signal and power requirements at a fraction of the space. Its flexibility and simplicity during design and operation, makes SIM a competitive alternative for a wide range of applications. They come in metallic version for robust applications, or in composite version for weight saving applications. Also available in custom design plates and Rack & Panel versions.

 

Main features :

• EN4165 qualified
• Military & Commercial Aerospace specification for rectangular modular connectors
• Space efficient & modular design
• SIM modules in overmold Technology
• Versatility of mixing & matching RF (Quadrax, Triax, Twinax and Coax), Fiber Optics, Signal & Power
• Available in standard crimp contacts (#8 to #23) and PCB contacts
• Available in standard Mono, 2 & 4 bay, or custom configurations
• EN4165 specification is comparable to U.S. MIL-STD-810 in performance
• Fire/Smoke/Toxicity conform to ABD 031 and FAR 25853

Flight Test Installation Harnesses

Flight Test Installation harnesses are special cables designed and built to the aircraft certification for measuring and monitoring flight data. These harnesses can be integrated into the aircraft on the customer's Final Assembly Line (FAL).

HDAS

HDAS is a high density monolithic connector. With its robust and simple design, high density, and high performance to extreme conditions, Featuring 6-tines starclip contact technology and a high-density staggered grid, HDAS is the right connector when installation cost and reliability must be considered.

NPI-15 Series High Pressure Sensors

The NovaSensor NPI-15 Series High Pressure Sensors employs SenStable® processing technology, providing excellent output stability. The NovaSensor® NPI Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. The piezoresistive sensor chip is housed in a fluid filled cylindrical cavity and isolated from measured media by a stainless steel diaphragm and body.

As with all NovaSensor® silicon sensors, the NPI Series employs SenStable® processing technology, providing excellent output stability.

Features:

  • Solid state, high reliability
  • High sensitivity, 200 mV typical FSO with 1.0 mA excitation
  • 316 L stainless steel, IsoSensor design
  • Linearity 0.1% FSO typical
  • Three standard ranges: 0 psi to 500 psi to 0 psi to 5,000 psi (0 bar to 34 bar to 0 bar to 345 bar) available,sealed gage or absolute
  • Standard configurations include: —1/2–20 UNF threaded male port with 1.0 in (25.40 mm) flange —0.59 in (15 mm) diameter x 0.87 in (22 mm) long cylinder with o-ring seals

—1/4–18 NPT male port with 7/8 in flange
—1/8–27 NPT male port with 7/8 in flange

  • Thermal accuracy FSO 0.2% typical
  • Custom Configurations and Other Pressure Ranges can be accommodated

By Amphenol Advanced Sensors | NovaSensor

 

NPI-15VC Series

The NovaSensor NPI-15VC Series of voltage-compensated, media isolated Pressure Sensors designed to operate in hostile environments while providing outstanding sensitivity, linearity, and hysteresis. The NovaSensor® NPI Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. The piezoresistive sensor chip is housed in a fluid filled cylindrical cavity and isolated from measured media by a stainless steel diaphragm and body.

As with all NovaSensor® silicon sensors, the NPI Series employs SenStable® processing technology, providing excellent output stability.

Features:

  • Solid state, high reliability
  • High sensitivity with 100 mV ± 1% FSO at 10 VDC
  • 316L stainless steel, IsoSensor design
  • Linearity 0.1% FSO typical
  • Thermal accuracy 0.2% FSO typical
  • Four standard ranges: 500, 1000, 3000, and 5000 psi (34.5, 69, 207, and 345 bar) available in absolute or sealed gage
  • Standard configurations include:
    —1/2–20 UNF threaded male port with 1.0 in (24.4 mm) flange 
    —0.59 in (14.98 mm) diameter x 0.87 in (22.09 mm) long cylinder with o-ring seals 
    —1/4–18 NPT male port with 7/8 in flange 
    —1/8–27 NPT male port with 7/8 in flange
  • Custom configurations and other pressure ranges available. Please consult factory

By Amphenol Advanced Sensors | NovaSensor

 

HN-Type

HN-Type product series features medium sized, weatherproof units designed for high voltage applications. These connectors and adapters feature a captivated contact design which prevents contact recession under extreme temperatures and mechanical stresses.

LRM connectors

Amphenol's LRM (Line replaceable module) connector family offers the versatility to facilitate custom combinations of digital, fiber optics, RF, power, and special high speed inserts to meet individual customer requirements. The LRM connector family uses Bristle Brush contact technology, consisting of multiple strands of high tensile strength wire that is bundled together to form a "brush-like" contact.

Lumiére Fiber Optic Termini;Elio

Amphenol Fiber Systems International (AFSI) offers the Lumiére fiber optic terminus for commercial airframe, avionics and aerospace applications. AFSI's Lumiére termini are a direct replacement for ELIO® termini and are compatible with existing ELIO® connectors. This fiber optic contact utilizes a 2.5mm diameter field-proven ceramic ST type ferrule which can be inserted into a size #16 cavity.


The terminus is hermaphroditic allowing the use of the same contact on the receptacle or plug. In addition, the contact is available in both multi-mode and single mode
versions and an anti-rotation feature allows PC, UPC and APC polishes. Because the Lumiére uses a standard ST type ferrule, well known procedures and readily available tools can be used for termination. Long and short boot versions are available to support multiple connector types.


Amphenol also manufactures a full line of EN 4531 rectangular and cylindrical connectors to house the Lumiére termini. 

Applications

  • In-Flight Entertainment Systems
  • Avionics
  • Heads-Up Displays
  • Airframe

Features & Benefits

  • Hermaphroditic style allows one contact type
  • Standard 2.5mm ST type ferrule interface allows the use of standard termination procedures and readily available tools
  • Simple access to optical termini facilitates cleaning
  • Options available for single mode and multimode fiber
  • Pull Proof option allows the use of the terminus in a connector without a backshell
  • Supports both tight or loose structure cable

Optical Performance

  • Typical IL: 0.3dB SM, 0.2dB MM @ 1300nm
  • Typical Return Loss: -30dB SM and MM @ 1300nm
LUX BEAM

Lux-Beam is easy-to-clean a single expanded beam fiber optic termini for MIL-DTL-38999/EN3645/EN4165. With its patented pinto-socket realignment feature, Lux-Beam is compatible with the various connectors on the market. Per design, Lux-Beam is as easy to install or replace as a fuse on a patch board.

M29504/4 & /5 Fiber Optic Termini

Amphenol Fiber Systems International’s (AFSI) M29504/4 & /5 style fiber optic termini, the M29K1000 and M29L1000 series, provide superior optical and mechanical performance. Designed to fit into MIL-DTL-38999 Series III, pin size 16 connectors, this low-cost, high-precision terminus family is ideal for harsh environment fiber optic interconnections. Available for single mode and multimode applications, these termini conform to the rigorous conditions of the MIL-PRF-29504D specification. The M29K1000 and M29L1000 series termini utilize the highest quality zirconia ceramic ferrules and split alignment sleeves available.

AFSI’s tight-tolerance ferrules are optimized for low insertion loss, low back reflection and exceptional durability. All ferrules are available in standard and ultra polished end faces for those tight optical budget applications. In addition, epoxy removal and polishing times are minimized by the ferrule’s pre-domed design feature. The M29L1000’s zirconia split alignment sleeve design ensures accurate physical contact, fiber-to-fiber alignment and guarantees the highest performing connector of its kind for use in a variety of demanding environmental conditions.

The M29K1000 and M29L1000 series fiber optic termination system offers precise, superior and reliable connections over repeated connector mating cycles and through a wide range of harsh environmental conditions. 

Features:

  • Precision fiber optic ceramic ferrules
  • Pre-radius ferrule design
  • Precision “press fit” stainless steel design
  • Accurate ferrule alignment system
  • Size 16 design (MIL-DTL-38999 compatible)
  • Low insertion loss and back reflection
  • Designed and manufactured to MIL-PRF-29504/4 and /5 specifications

Benefits:

  • Solid reliable connectivity through a wide range of harsh environmental conditions
  • Compatible with all qualified MIL-DTL-38999, Series III connectors
  • Fast termination and polish time
  • Reliable, repeatable and durable connections
  • Easy to clean

Applications:

  • Avionics
  • NAVAIR
  • Commercial aircraft
  • Harsh environment
  • Land tactical applications
  • Shipboard
M55302 Connectors

Amphenol’s Low Mating Force Connectors are well known in the connector arena – with proven performance on the ground, in the air, and at sea. – In service for over 25 years, with over 50 million brush contacts fielded; and qualified for use on M1A2 Abrams, F-16 Falcon, F/A-22 Raptor, F-35 Lightning II, AIM-132 ASRAAM and many more applications.

M26482 Connectors

Amphenol Aerospace offers the Matrix product line of MIL-DTL-26482, Series 2 Connectors. This series provides a bayonet coupling connector with crimp rear insertable, rear releasable contacts.

D38999 Series I connectors

The MIL-DTL-38999 Series I bayonet coupled circular connector provides high performance capabilities for both general duty and severe environmental applications. The 38999 Series I is a proven connector family for many applications. The crimp style MS version meets or exceeds MIL-DTL-38999 Series I. The solder style MS version meets or exceeds MIL-C-27599 Series I.

Amphenol LJT connectors are MIL-DTL-38999 Series I and HE308 qualified

Amphenol LJT connectors are MIL-DTL-38999 Series I and HE308 qualified. They were developed to meet the needs of the aerospace and military industries. These bayonet coupling connectors offer a large variety of contact arrangements and shell types, with maximum weight / space savings, and a 100% contact protection.

38999 Series II

Our MIL-DTL- 38999 Series III threaded circular connectors feature a unique inner clutch design providing enhanced anti-vibration and anti-decoupling capability - actually tightening itself under vibration, which provides advantages in hard to reach areas. Featuring quick coupling and low force mating in a single 360 degree turn of the coupling nut. Mates with standard Series III receptacles.

Amphenol Tri-Start MIL-DTL-38999 Series III / EN3645 thread coupling connectors offer the highest performance capabilities for both general duty and severe environment applications

Amphenol Tri-Start MIL-DTL-38999 Series III / EN3645 thread coupling connectors offer the highest performance capabilities for both general duty and severe environment applications. Different versions are available: "TV" metal versions (aluminum, stainless steel or marine bronze) as well as "CTV" composite versions, which offer a lightweight, corrosion resistant connector with the same high performance features as its metal counterpart.

Matrix 5015

Amphenol's Matrix 5015 connectors with crimp rear release provides an alternative to the older MIL-C-5015 solder type. It bridges the gap between an old connector standard and the environmental high performance needs of current technologies. The Matrix 5015 is a medium to heavy weigh cylindrical qualified for environmental and firewall applications.

NGCON

The next generation connector (NGCON) is designed and manufactured using proven technology and features from existing connector standards of 38999 & 28876.  
These innovative connectors include genderless contacts and high-density packaging, outstanding optical performance, and meet the rigorous shipboard and aerospace environmental demands. 

Features and Benefits:

  • NGCON Military Standard compliant
  • Rear release termini
  • Genderless termini
  • Wall-mount and jam-nut receptacle configurations
  • High-density arrangements
  • Operating temperature range from -55 to +165°C
  • Environmental sealing terminus
  • 125mm diameter ceramic ferrule
  • Removable front alignment sleeve retainer (ASR) for easy access to termini for cleaning and inspection
  • D38999 Series III accessory threads and M28876 coupling threads

 

Media Converter Copper Fiber Optics

Amphenol's RES-GMC is a MIL-STD rugged, unmanaged-military-grade media converter. It provides 1 gigabit copper port to 1 gigabit fiber optic port. Developed for military and harsh environment applications, the RES-GMC is compliant with MIL-STD461, MIL-STD-810, MIL-STD-704 and MIL-STD1275. the RES-GMC series serves as a robust solution to extend your tactical gigabit ethernet network connectivity of up to 120km over fiber.

Designed for harsh environments, our rugged Copper / Fiber Optic Media Converters give you the assurance of a continuous and secure data conversion. Custom configurations are available on demand.

  • RES-GMC with Expanded Beam Technology: Unmanaged; 2 Gigabit ports
  • RES-GMC with Butt Joint Fiber Connector: Unmanaged; 2 or 4 Gigabit ports
  • RES-GMC-1M-FORC: With expanded beam technology; With remote control through fiber optic
MilTech®

Times Microwave produces sealed, flexible RF and microwave transmission line assemblies optimized for military environments. These cables exhibit an extremely long life in the rigorous environments found in airborne, shipboard and ground based applications.  MilTech® cables are hermetically sealed and incorporate intermediate sections compatible with an assortment of connector systems.

MMA - Multi Modular ARINC

MMA combines many of the best features from popular product lines including ARINC 600's power, RF, fiber optic and quadrax contacts, low mating forces and shrouded
size 22 pins. Sealing capabilities are comparable to M83527 with shell seal, face seal and grommet. Modular, removable inserts are effective for separating signal and
power contacts, while providing ease of installation and customization in the field.
Choose our 360° EMI spring option if shielding effectiveness is a concern.
Customer specific designs lead to endless possibilities.

Introducing Amphenol Canada's ARINC 600 Next Generation Stamped & Formed Contact Technology.
Size 22 Sockets are now available in stamped and formed designs in both PCB and Compliant styles

The Next Gen ARINC 600 is available to replace your standard inserts and contacts with this intelligent design.
This will provide cost savings and 25% reduction in weight

These inserts and contacts are fully tested and in compliance with all ARINC 600 specifications.
The contacts are designed using stamped and formed method with overmolding technology.
They are completely inter-changeable and mateable with all existing Size 22 contacts.
Contact Amphenol Canada for more information.
• High-speed
• Compact
• Durable
• Low -cost
• Filtered
 

PhaseTrack®

PhaseTrack® cable assemblies are designed for applications demanding minimal phase change over temperature.  All PhaseTrack cables use proprietary TF4® dielectric that does not have the abrupt shift in the phase that occurs with solid or tape wrapped PTFE based products under normal room ambient temperature conditions.  PhaseTrack cable has the same triple shield construction used in Times popular SF®, SFT®, SilverLine® and MT cables.

Caps

Protect your plugs and receptacles against dust, water, moisture, EMI and contact bending. We provide protective caps for 38999 Series I, II, III (MIL-DTL-38999/EN3645), PT/451 Series (MIL-DTL-26482) and RJ/USB Field connectors. Standard caps, snap caps, rubber caps and dummy receptacles available.

26500 Connectors

Amphenol 26500 connectors are medium-sized connectors with a rugged design, lightweight construction, and dependable performance. These connectors are used in: avionics, missile systems, aircraft general-purpose applications, aircraft engines and firewalls.